Crawl under the left front of the truck and look up at the bottom of the radiator
. At the bottom of the driver side radiator tank (facing toward the fender) is a 3/4′′ long flat handled plug.
How do you drain the coolant on a Dodge Dakota?
Locate the radiator drain plug at the
base of the radiator on the driver side
. The plug is located on the engine side near the bottom of the radiator. Position a large drain pan beneath the radiator drain plug. Loosen the radiator drain plug by hand and remove it.
How do I find my coolant drain plug?
The drain will be located
on the rear of the block
, near the bottom but not level with the oil pan. Typically they are located closer to the flywheel housing then the outside of the engine pan and will look like large bolts set into the block which are not holding anything in place.
How do you drain the radiator on a 2003 Dodge Durango?
NOTE: Radiator draincock is located on the left/lower side of radiator facing to rear of vehicle.
Attach one end of a hose to the draincock
. Put the other end into a clean container. Open draincock and drain coolant from radiator.
How do you unclog a radiator drain plug?
Just
pull the lower hose
with the engine running and the radiator cap off. Flush it out by: reattaching hose, filling radiator, wait for thermostat to open, pull lower hose, and repeat.
Where is the radiator drain plug on a 2001 Dodge Dakota?
The drain plug on the 2001 Ram models is located
on the bottom inside corner of the driver side of the radiator
. Slide a drip pan under the drain plug.
What kind of coolant does a Dodge Dakota take?
Prestone 50/50 Coolant/Antifreeze
.
Where is the radiator drain Petcock?
You can locate it
underneath the radiator of your car
if you lift the front of your car with a jack. The petcock is a small bolt right under the radiator and easy to spot as modern radiators do not have any other holes underneath them that would require bolts.
Can a radiator drain plug leak?
A car radiator leaks because either the radiator hose is punctured or the radiator drain plug O-ring
is damaged
. … Eighty percent of radiator leaks due to damaged radiator drain plug O-rings. This means that whenever you have a radiator leak, the radiator drain plug O-ring is the first thing you can check.
How do you completely drain engine coolant?
- STEP 1 – Safety first. …
- STEP 2 – Press down on the radiator cap, slowly turn it counter-clockwise until it hisses, wait until the.
- STEP 3 – Place a large container under the drain valve at the bottom of the radiator. …
- STEP 4 – Loosen the drain valve and allow the coolant to completely drain out.
Where is the radiator drain plug on a 2000 Dodge Durango?
Crawl under the left front of the truck and
look up at the bottom of the radiator
. At the bottom of the driver side radiator tank (facing toward the fender) is a 3/4′′ long flat handled plug. Twist your hand (with a pair of pliers) up there from the back side of the bumper fascia.
How can you tell if a radiator is clogged?
- Leaking coolant. Scroll to continue with content. …
- Discolored and thicker coolant. You know your coolant’s original color, don’t you? …
- Damaged water pump. …
- Excessively high gauge temperature readings. …
- Blocked, bent, or damaged radiator fins.
What are the signs of a blown head gasket?
- White smoke coming from the tailpipe.
- BUBBLING IN THE RADIATOR AND COOLANT RESERVOIR.
- unexplained coolant loss with no leaks.
- Milky white coloration in the oil.
- Engine overheating.
Are all radiator drain plugs the same?
Engine block coolant drain plugs come in
different shapes, sizes
, and can be made of different materials. … If your engine’s coolant drain plug is cracked, damaged, and already allowing your coolant to leak out, it’s time to get a replacement.
Where is the radiator drain plug on a 2002 Dodge Dakota?
At the bottom of the driver side radiator tank (facing toward the fender)
is a 3/4′′ long flat handled plug. Twist your hand (with a pair of pliers) up there from the back side of the bumper fascia. Grip it and give it a 180* counterclockwise twist.
How much coolant does a 4.7 Dodge take?
4.7 Liter V-8 Engine
The truck’s cooling system requires
13.8 qts
.
