Follow the upper radiator hose to the front driver's side of the intake manifold
, where it meets the engine. This is where the thermostat housing on your Ford Explorer is located.
What are the symptoms of a bad thermostat?
- Leakage from the mounting surface. Appearance: Seepage, drips or large coolant bleed marks on or around the mounting surface or on the housing. …
- Rust and corrosion. Appearance: Rust and corrosion on the surfaces of the thermostat. …
- Deposit build-up. …
- Map-controlled thermostats.
Where is the thermostat located?
Most thermostats are located
where the top radiator hose joins the engine
, so these steps deal with this type. If your thermostat is in the bottom radiator hose, the principle is the same.
How much is a thermostat for a Ford Explorer?
If you have a ford explorer the average cost for a ford explorer thermostat replacement is
between $218 and $245
.
How do you change a thermostat on a 2002 Ford Explorer?
- Ensure the truck is turned off and parked on a flat and level surface. …
- Trace the hose to the thermostat housing. …
- Unscrew the hose clamp with a flat-tip screwdriver. …
- Unbolt the thermostat housing with a socket wrench. …
- Pull the thermostat out of the housing.
Can a stuck thermostat fix itself?
Can a stuck thermostat fix itself? One may also ask, can a stuck thermostat fix itself?
You can either replace the valves with new ones or work the valves back into a position
where they can move up and down more freely. Replace the thermostat.
What will a bad thermostat cause?
When the engine's temperature rises very high, the thermostat opens and allows the coolant to flow to the radiator that reduces its temperature. … A bad
thermostat can stuck-open or stuck closed
. A stuck-open thermostat can prevent the engine from getting heated enough to function properly.
How hard is it to change your thermostat?
Upgrading to a thermostat that automatically changes the indoor temperature setting is fairly easy, and it can trim about
$180 off
your annual heating and cooling costs, according to the EPA. Simple models that only control heat are sold at home centers for around $25.
What happens if you run a car without a thermostat?
If you drive your car without a thermostat,
it will run at 50 degree centigrade
. When the car drives at this temperature, moisture or humidity will form. And when it is condensed, it will mix with oil and turn into slush (watery ice). This slush blocks out lubrication.
How much does it cost to replace thermostat housing?
Between $284 and $328
is the average cost for a thermostat housing replacement. Labor costs are between $152 and $193 while parts are between $132 and $135.
How long does it take to change a thermostat on a car?
The required time could range from
1/2 hour to literally hours
in some unusual designs. For your particular year, make and model, that is a 2002 Protege, it requires about 1 hour to remove and replace the thermostat.
How much is a thermostat for a truck?
You will pay
between $150 and $200
to have your thermostat replaced. The labor should be around $125, while parts should cost you, on average, about $45.
Why is my 2002 Ford Explorer overheating?
While there are a variety of reasons your Ford Explorer is overheating, the most common 3 are a
coolant leak
(water pump, radiator, hose etc.), the radiator fan, or a failed thermostat.
Where is the thermostat located on a 2003 Ford Explorer?
Follow the upper radiator hose to the front driver's side of the intake manifold
, where it meets the engine. This is where the thermostat housing on your Ford Explorer is located.
