When an ink cartridge is expended or the maintenance box is at the end of its service life, you need to replace it . You may also need to replace a cartridge that is more than six months old if your printouts do not look their best, even after cleaning and aligning the print head.
Can you reuse a maintenance box on Epson printer?
Caution: Do not reuse a maintenance box that has been removed and left uninstalled for more than a week . Keep the maintenance box away from direct sunlight. Note: You cannot print or clean the print head while the maintenance box is full, but you can perform tasks that do not require ink, such as scanning.
How do I fix my Epson maintenance box?
- Remove the new maintenance box from its package. ...
- Turn off the product and disconnect the power cord and USB cable.
- Close the cover and turn the product upside-down.
- Press the tabs and remove the maintenance box cover.
- Slide the maintenance box as shown and pull it out.
How do I know if my Epson maintenance box is full?
You can check the status of your maintenance box using your product’s LCD screen. Press the home button, if necessary. Select Maintenance > Maintenance Box Service Life and press the OK button . You see the remaining ink capacity of the maintenance box.
Can I print without maintenance box?
When the maintenance box is full, you cannot print and clean the print head until it is replaced to avoid ink leakage . However, you can perform operations that do not use ink such as scanning. When the following screen is displayed, the part cannot be replaced by users.
Can I reuse maintenance box?
Do not reuse a maintenance box that has been removed and left uninstalled for a long period . Keep the maintenance box away from direct sunlight. Note: The maintenance box is a user-replaceable part and is not covered by the product warranty.
How do I clear my Epson maintenance tank?
- Turn off printer.
- Hold down the three leftmost arrow buttons: [left-arrow] [down-arrow] [up-arrow]
- Turn on printer.
- Release buttons.
- New menu appears.
- press up/down arrows to get to the “Clear Counters” menu.
- press RIGHT.
- press up/down arrows to get to the “Maintenance Tank” menu.
How do I reuse my Epson maintenance tank?
Fold 3 paper towels together to loosely fit in the bottom of the empty tank (replace ink soaked pads every time the chip is reset to avoid overflow). Reattach the plastic grid, making sure it fully snaps onto the base with thick “Epson” end facing the outside (same way it was removed).
What is Epson maintenance box service life?
Maintenance box is at the end of its service life . You need to replace it. You must replace the maintenance box to continue printing. A printer’s ink pad is nearing the end of its service life.
How do I check my maintenance box?
- To check your status, access the Windows Desktop, double-click the product icon in the Windows taskbar, then click Details. ...
- Replace or reinstall the maintenance box or any ink cartridge as indicated on the screen.
Does Epson ET 2760 have a maintenance box?
The Epson ET-2760 absolutely has a user changeable maintenance box . It is the same part# box as the one for many other models including the ET-15000, ET-3760, ET-4760, etc.
How do you change the maintenance box on an Epson XP 6000?
Place the used maintenance box in the plastic bag that came with the new maintenance box. Seal the bag and dispose of it carefully. Insert the new maintenance box into the holder and push it all the way in. Insert the maintenance box cover into the tabs on the product as shown and tighten the screw to secure the cover.
How do I maintenance my Epson printer?
Make sure that the printer is turned on and the ink out light is off. Access the Print or Page Setup dialog box and click the Utility icon button, then click the Head Cleaning button. Follow the on-screen instructions . The power light and the ink lights flash while the printer performs the cleaning cycle.
Does Epson 2720 have a maintenance box?
The Epson EcoTank ET-2720 All-in-One Supertank Printer do not have a replaceable maintenance box . This product uses an ink pad to collect, distribute, and contain the ink that is not used on printed pages.
How do I change the maintenance box on my Epson 4750?
- Press the power button to turn off the product.
- Remove the new maintenance box from its package. ...
- Press the tabs and remove the duplexer (rear cover).
- Grasp the maintenance box as shown and pull it out of its holder.
How do I reset my Epson 7800 maintenance tank?
How do I change the maintenance box on my Epson ET 3750?
Can you reset Epson maintenance box?
The Maintenance Reset Utility can only be used once and will allow printing for a short period of time . You may download the Maintenance Reset Utility when you receive the following message on your PC: A part inside your printer is at the end of its service life. Click the link below for details.
How do I change the maintenance box on my Epson XP 6100?
Open the front cover and pull on it to slide out the lower paper cassette. Raise the control panel. Use a flat-head screwdriver to loosen the screw on the maintenance box cover as shown, then remove the cover. Grasp the maintenance box as shown and pull it out of its holder.
