Where To Buy New Nylon 57-559 26X2.125 Bike Tires?

CST C727 Bicycle Tire –

26 x 2.125

(57-559) – Black – 31-735.

What does 559 mean on a bike tire?

1 (54-559), which denotes

a tire with 26 inches in diameter (559 mm) and the width of 2.1 inch (54 mm)

. Other accepted measure is the so called French standard that gives an approximate outer diameter and the width of the tire, i.e. 700x35C – approximate outer diameter (700 mm) and tire width (35 mm).

Are all 26-inch bike tires the same?

Most typical 26-inch tires have a width of about 1.75 inches up to 2.2 inches

. There are some 26-inch tires available that have a smooth road tread and may be as narrow as 1 inch to 1.5 inches. For downhill mountain bikes, there are tires about 2.5 inches wide, and for snow bikes, even up to 4 inches wide!

How do you measure a bike tire for replacement?

Hold the end of the tape measure against the center of the bicycle wheel, and extend the tape in a straight line to the outer edge of the tire. For traditional sizing, double the inches to find the bike tire diameter.

What does 700x45c mean?

700x45c In Inches (Warning!) The simple answer is this: 700 =

27.5 inches

.

Are 700c and 28 the same?

28”/700C/29er

The tyres can differ, but

the 28”, 700C and 29er are all the exact same rim diameter

. The 700 markings will be followed by the width in mm, and the 28 or 29 markings will be followed by the width in inches.

What size is 559 rim?

559 is

the diameter in millimeters of the rim where the tire hooks onto it

. that’s the size of most modern 26′′ wheels and tires. there are a few other rim/tire sizes that are nominally 26′′ that are archaic at this point and unlikely to be found on any bike made in the past few decades.

What ETRTO 559?

The rim could well be listed as 559 x 22, the 559 refers to

the rim diameter at the bead seat

(i.e. the inner diameter of the tyre), the 22 refers to the inner dimension of the rim between the rim flanges. One inch is 25.4 mm so 22mm = 0.87 inches.

Does inner tube width matter?

All inner tubes will come with a recommended range for tyre width

– for example 700 × 20–25 for traditional road tyres, 700 × 25–32 for wider road tyres. A narrower inner tube will balloon out to fill a tyre a few millimetres wider than its recommended width – but don’t take it too far or it might explode.

What tire sizes are interchangeable?

Wheels and tires are not interchangeable words

. Tires are a part of the wheel setup. For instance, your vehicle has a set size of rims, but you can buy different sizes of tires to fit those rims, as long as the middle of the tires is the correct size.

How much does a 26 inch tire cost?

Can you put 24 tires on a 26 bike?

Your 26′′ tires sit on wheel rims, whose diameter is probably 559 mm.

24′′ tires will not fit onto these rims

; to use 24′′ “junior” tires you actually need smaller wheels, of a 507 mm diameter. These smaller wheels require a different frame.

How do I know my bike wheel size?

Hold the end of the tape measure against the center of the bicycle wheel, and extend the tape in a straight line to the outer edge of the tire. For traditional sizing, double the inches to find the bike tire diameter.

What do the numbers on bike tires mean?

These dimensions can be found on your tire: Diameter x Width.

The first number is the diameter of your wheel

. Sizes such as 26, 24, 20, 27.5, 29 and 700c are common tire diameters. The second number (after the X) is the width of your tire. The range for widths is usually between 1 and 3 inches.

What size wheel is 700c?

All road and cyclocross bikes are built with 700c wheels, which are

29 inches

. However, 700c wheels are designed to accommodate a thinner tire. Many come in widths ranging from 18 to 23 millimeters, with touring tires ranging from 25 to 28 millimeters.

How wide is a 700x45c tire?

What does 32c tire mean?

Typical road bike tire: 700 x 32c indicates

a tire that has an outer diameter of 700mm and a width of 32mm

. (Note that the “c” does not stand for centimeters; it’s a holdover from an old French system that designated tire sizes using the letters a, b and c.)

IS 700c and 29er the same?

A 29-inch wheel would be the same as a 700C wheel

, but you need to factor in the width of each wheel to determine compatibility. A 700C tire will fit on a 29-inch rim – provided there’s the same bead seat diameter. A 29-inch wheel is the same as a 700C wheel most of the time.

What does the C mean in 700c tires?

700c is the size of your bike tire, according to the ‘French system’. The “700” number is the stated diameter of the bicycle tire in millimeters. “c” is

the width code of the tire

(as you would see if you looked at your bike from behind or in front).

What does 700x38c mean?

The 700 signifies the nominal or outer tire diameter while the 38 represents the tire width, both expressed in millimeters. So, a tire measuring 700x38c means

its outer diameter is 700mm while its width is 38mm

.

IS 700c bigger than 27?

The rim diameter of a 700c wheel is actually

slightly smaller than that of a ’27inch’

. 700c bead diameter is 622mm whereas 27′′ bead diameter is 630mm.

Can you put any width tires on same rim bike?

Bicycle wheels can handle a range of different widths

, so it’s not absolutely necessary to replace your tires with one with the exact same width. In fact, there are often advantages to using a tire that is a little wider, as long as your bicycle has adequate clearance to handle the larger size.

Can you put 1.95 tires on 1.75 rims?

Will A 1.75 Tire Fit A 1.95 Rim?

Yes, you can

. In fact, any tire up to 20 inches will perfectly fit a 20-inch rim or wheel.

What tires will fit my bicycle rims?

How do you read an ETRTO size?

The ETRTO size specification

37-622 indicates the width of 37 mm and the tire inner diameter of 622 mm

. This dimension is clear and allows a precise classification of the rim size. The inch marking (e.g. 28 x 1.40) states the approximate outer diameter (28 inches) and the tire width (1.40 inches).