Riding mower manufacturers often have a variety of styles and deck sizes of riding mowers.
Some belts are designed to work on several deck sizes
. If the riding mower is an older model or no longer manufactured, a replacement belt is often recommended by the manufacturer or authorized dealer of the riding mower brand.
Are all mower deck belts the same?
Deck and Belt Sizes
The deck size is the measurement of the width of area of grass the mower will cut. Deck sizes for the 200 series are 38 and 46 inches. However,
the same belt size will work for either deck size
. The belt length is determined by measuring the circumference of the belt when stretched to full capacity.
What size belt fits a 48 inch mower deck?
SCAG deck drive belt fits 48′′ mid-sized commercial mowers. Size:
5/8 X 89.6
, Replaces Scag # 48089.
How do I know what size deck belt I need?
What size belt does a 42 inch yard machine take?
MTD Deck Belt fits 42′′ Cut Decks No.
Size:
5/8′′ x 83-3/4′′
.
What causes a mower deck belt to come off?
A riding mower belt can come off your mower when
brackets, belt keepers or idler spring are worn or damaged; your bearings are bad in your pulleys or spindle housings; or debris is interfering with the tension of your deck belt
.
How do I know what belt to get for my lawn mower?
Place one end of the tailor's tape measure on the mark, then extend the tape measure around the inside circumference of the circle until you reach the mark with the other end of the tape measure. Take your reading from the tape measure to determine the size of the belt.
How long do mower deck belts last?
Under ideal conditions, a mower drive belt will last
between three to four years
. If you use the mower quite a bit or if you do not take good care of the machine, it may wear out sooner. Wear and tear often makes it hard to keep the mower belt going for longer than four years.
What is the difference between a deck belt and AV belt?
Assuming you're asking about a riding lawnmower type… There is often a “deck belt” which is a v-belt which is routed around multiple pulleys on top of the mower deck and often hidden by shrouds, guards, or covers and is tensioned with a spring on a pulley.
How long is a 48 deck belt?
Husqvarna 48-in Deck Belt for Riding Mower/Tractors (11/16-in W x
138.75-in L
)
What size is GX20072 belt?
John Deere GX20072 42-in Deck/Drive Belt for Riding Mower/Tractors (
1/2-in W x 103.875-in L
)
How long is a John Deere deck belt?
Dimensions. Belt length (in.) Fits Deck Size (in.)
54 in.
What size deck belt do I need for a 42 inch deck?
AYP / Craftsman / Sears Deck Belt fits 42′′, 46′′ & 50′′ Decks built since 1995. Size:
1/2′′ x 95-1/2′′
. Replaces part numbers 532144959 and 144959.
How do you measure a mower deck belt?
Lay the belt flat on a hard surface. Measure the belt by wrapping the cloth tape measure around the belt. For broken belts, simply measure the total length of the belt. Hold the cloth tape measure against the length or width of the belt depending upon which measurement you need.
How do you measure for a belt?
What size is the drive belt for a 42-in Craftsman Riding Mower?
Shop CRAFTSMAN. CRAFTSMAN 42-in Deck/Drive Belt for Riding Mower/Tractors (
1/2-in W x 16-in L
)
What size belt does a Cub Cadet 42 inch deck take?
Cub Cadet Deck Belt fits 42′′ Cut Decks No.
Size:
1/2′′ x 66-3/4′′
.
How long is a 954 04060C belt?
Riding Mower
42-inch
Deck Belt – 954-04060C | Troy-Bilt US.
How do you tighten a mower deck belt?
How tight should a deck belt be?
How do you know if your lawn mower belt is bad?
- The belt has side wall damage. Mower belt edges should be smooth and even throughout the entire length of the belt. …
- The belt has a glazed or burned sidewall. Look at the belt edge that contacts the pulleys. …
- The belt is cracked.
What size belt does a Craftsman riding lawn mower take?
AYP / Craftsman / Sears Drive Belt No.
AYP / Craftsman / Sears Drive Belt fits 42′′ mowers, 12-18 HP. Size:
1/2′′ x 92-1/4′′
. Replaces part numbers 532130969 and 130969.
How do you change a belt on a riding lawn mower?
When should I replace my deck belt?
There is no specific time length that mower belts need to be replaced
. Some belts may last longer than others due to different operating conditions. One thing is for certain though, the more the mower is used, the sooner you will need to consider replacing the mower belt.
Can mower belts stretch?
Yes, lawnmower belts can stretch
. Continuous wear due to regular operation can cause them to elongate over time. When it stretches more than it should, it can result in the drive belts lose grip on the pulley system.
How often should you replace your mower deck belt?
You shouldn't need to replace belts every year, or more in one year
. A common cause of belt breakage is excessive grass clippings on the deck. Grass clippings can work their way under pulleys and deck covers, causing series problems.
