Masonry bits look like larger twist drills with a slightly tighter corkscrew shape. You can identify them
thanks to their wide arrow-shaped heads
. They’re commonly used in hammer drills to grind masonry down as they cut through it. You can use them on brickwork, stone, breeze blocks, and other hard stone surfaces.
How do I identify a masonry drill bit?
Masonry bits look like larger twist drills with a slightly tighter corkscrew shape. You can identify them
thanks to their wide arrow-shaped heads
. They’re commonly used in hammer drills to grind masonry down as they cut through it. You can use them on brickwork, stone, breeze blocks, and other hard stone surfaces.
Which bit is for masonry?
Drill bits that can drill through concrete are called masonry bits. They are also good for drilling through brick and stone. Drill bits with a
tungsten carbide tip
are the strongest; when it comes to solid concrete, the sharper the better. Masonry bits cut holes through concrete in two steps.
How do I know which drill bit to use?
The diameter of the hole you drill
should be slightly smaller than the diameter of the screw
. So, for example, if you’re using a 3.5 mm screw, use a drill bit with a diameter of 3 mm. If you’re using wall anchors as well as screws, the drill bit and anchors should have the same diameter.
What Colour is masonry drill bits?
Masonry bits have a toughened tip which is quite different to normal twist drills. There is no special colour. Most masonry bits we use are
plain grey or silver
. Take a look at the screwfix website and search for masonry bits then twist drill (also called high speed steel bits).
Can I use a regular drill to drill into brick?
Drilling into a brick wall with a regular drill requires a
high-quality masonry bit at
the least. With no hammer action, the tool has to rely on its turning speed. Without a proper hammer drill, the process will take longer. You will also need to remove the drill from the hole more often.
What is the best drill for masonry?
A hammer drill
is perfect for light masonry. It works best at drilling holes in bricks, mortar and concrete blocks. But it can also handle the occasional hole in poured concrete.
Do I need a special drill bit for brick?
You can never use wood or metal drilling bits to drill holes in masonry, you must use specific
masonry drill bits designed for masonry
. Masonry bits are excellent for drilling bricks, Thermalite or concrete blocks, mortar (cement), concrete and some tiles as well.
What is the smallest masonry drill bit?
The smallest masonry bits are
around 3/16 inch in diameter
, with larger bits topping out at the 1⁄2-inch size. Hole saw bits have sizes that go up to 4 inches or more.
How long does a masonry drill bit last?
How long will bits last? Speed and bit life depend on several factors, including the type of aggregate, age of the concrete, type and sharpness of the bit and the amount of steel or rebar in the concrete. Generally, you can expect to drill
between 150 and 250 holes with each bit
.
What can I use instead of a 5/16 drill bit?
5/16 converts to
10/32
. Assuming your bit set is that granular, the next larger size is 11/32, and the next smallest size is 9/32. Those aren’t necessarily common sizes, however. The next size up in x/16 would be 6/16, which is 3/8.
How do you know if a drill bit is for concrete?
Masonry bits resemble wood bits at a casual glance because they’ll also have a
deep spiral groove
to help channel debris from the hole as you drill. The main visual difference is that masonry bits don’t have the blunt, gently rounded tip you’ll see on standard general-purpose bits.
What is a 7 32 drill bit?
| Drill Bit Hole Diameters | Metric Size Fractional Size | 5 mm .1968 7/32 | 6 mm .2362 15/64 | 7 mm .2756 1/4 |
|---|
Can you use a masonry bit on plaster?
Equip a power drill with a
carbide drill bit
. A regular drill bit will dull when drilling through plaster or break if a masonry wall is behind the plaster.
Can I use a metal drill bit on masonry?
There are also different materials used to make the types of drill bits used for concrete, brick or tile. Almost all drill bits are made of metal. With few exceptions, metal bits are
the most practical choice for every surface
including wood, concrete, tile, glass and metal surfaces, as well.
Is a HSS drill bit is suitable for drilling into masonry?
High-speed steel
(HSS) drill bits can drill wood, fiberglass, polyvinyl chloride (PVC) and soft metals such as aluminum. … They work for drilling wood, metal, fiberglass and PVC. Carbide-tipped drill bits stay sharp much longer than steel, HSS or titanium bits. They’re effective for drilling tile and masonry.
