What does OSHA require employers to construct and install to minimize electrocution hazards? Do not overload circuits .
Which of these does OSHA require employers to construct and install to minimize electrocution hazards?
An example of an arc flash is a lightning bolt. The electrical current travels through air. ... Who is required to ensure that lighting, equipment, motors, machines, appliances, switches, controls and enclosures are constructed and installed to minimize electrical dangers.
Which of the following are electrical hazards OSHA?
The following hazards are the most frequent causes of electrical injuries: contact with power lines, lack of ground-fault protection , path to ground missing or discontinuous, equipment not used in manner prescribed, and improper use of extension and flexible cords.
What does the term electrocution mean OSHA?
E = Electrocution: Electrocution is fatal ; it means to kill with electricity. Electrocution results when a human is exposed to a lethal amount of electrical energy.
Which of the following are electrical hazards OSHA quizlet?
OSHA’s electrical standards address electrical workplace hazards. Employees working on, near, or around electricity may be exposed to dangers such as, electric shock, electrocution, burns, fires, and explosions .
Which of the following answer options are your employer’s responsibility OSHA?
Answer: Employers have the responsibility to provide a safe workplace . Employers MUST provide their employees with a workplace that does not have serious hazards and follow all OSHA safety and health standards. Employers must find and correct safety and health problems.
Who is responsible for conducting a hazard assessment?
The employer is responsible for risk assessments within a workplace, meaning that it is their responsibility to ensure it is carried out. An employer can appoint an appropriate individual to carry out a risk assessment on behalf of the organisation, as long as they are competent to do so.
Is electricity a hazard?
The major hazards associated with electricity are electrical shock, fire and arc flash . ... Water is a great conductor of electricity, allowing current to flow more easily in wet conditions and through wet skin. The effect of the shock may range from a slight tingle to severe burns to cardiac arrest.
What is the most common type of electrical hazard?
- Contact with live wires resulting in electric shock and burns,
- Fires due to faulty wiring,
- Exposed electrical parts,
- Ignition of fires or explosions due to electrical contact with potentially flammable or explosive materials,
- Inadequate wiring,
What is the most common OSHA electrical violation?
According to OSHA’s top ten most cited safety violations in 2020, the most frequently cited electrical violation was the inability to control hazardous energy . In the industrial world, controlling hazardous energy is bundled together with the use of a Lockout Tagout program.
Does OSHA cover electrical hazards?
OSHA standards cover many electrical hazards in many different industries . ... OSHA’s electrical standards are based on the National Fire Protection Association Standards NFPA 70, National Electric Code, and NFPA 70E, Electrical Safety Requirements for Employee Workplaces.
What is the minimum safe distance from energized overhead power lines?
Work at a safe distance
The Occupational Safety and Health Administration (OSHA) requires that equipment be kept at least 10 feet away from power lines with voltages up to 50kV. For lines with voltages higher than 50kV, the required distance is even greater (see below).
What is the primary cause of electrocution OSHA quizlet?
Some examples of the most common causes of electrocution include: A. Contact with underground and above ground energized power lines . ... Failure to properly Lock Out and & Tag Out energized power sources.
Which of the following is an electrocution hazard?
The major hazards regarding contact with energized sources are electrical shock and burns . ... This occurs when an individual comes in contact with both wires of an electrical circuit (one wire of an energized circuit and the ground, or a metallic part that has become energized by contact with an electrical conductor).
Why do electrical devices have resistance?
Electric current refers to the rate of flow of electric charge, which causes free electrons to flow. As electrons move through the conductor, some collide with atoms, other electrons, or impurities in the metal . It is these collisions that cause resistance.
Which of these are ways to protect yourself from electrical hazards OSHA?
Avoid electrical hazards both in your home and elsewhere: Never touch a fallen power line . Avoid contact with overhead power lines during cleanup and other activities. Do not drive through standing water if downed power lines are in the water.
