Which Process Structure Does Trek Bikes Use?

Frame – the main structural part of the bicycle, commonly made of steel, aluminum, titanium, or carbon fiber. Composed of a top tube, head tube, down tube, bottom bracket shell, seat tube, seat stays, and chain stays (see image). A frame and fork sold as a combination are referred to as a frameset.

What is the process of a bicycle?

The process of manufacture is traced from the beginning; the design on paper and the raw materials . We see what goes to make the steel tubes of the frames, the handle bars, the gear wheels, the pedal cranks, the pedals, the spokes, the wheels and the hubs, until at last the complete bicycle is ready for testing.

Where does Trek manufacture?

Well, over 99 percent of Trek bikes are not made in the US.

Instead, almost all Trek bikes are made on foreign soil. The leading factories that build Trek parts and accessories are in Netherlands, Germany, and China . However, China and Taiwan produce the most parts.

What industry is Trek Bicycle?

Is a bicycle a frame structure?

The parts are often called structural components. For example, your skeleton is a frame structure. Its structural components — your bones, ligaments, and tendons — are joined together. A bicycle frame is another example of a frame structure (see Figure 4.10).

What are the 3 types of structures?

There are three basic types of structures: shell structures, frame structures and solid structures . But some structures are a combination.

How are bikes made step by step?

Where are bike parts made?

You will realize that the majority of bikes sold in the USA are produced in Taiwan and China by just a handful of manufacturers; Giant being the largest of them all. Generally, low to mid-level bike units are manufactured in Asia whereas the high-end bikes are made in Taiwan if not in-house for a few brands.

What are the input and output of a bicycle system?

The chain drive of the bicycle changes the input pedalling force and pedalling speed into an output . On the right is the output. This is what you get out of a bicycle, which is speed. A system diagram shows how a system will change inputs into outputs.

What are Trek bikes made of?

Yet despite the aerospace technology, the bikes are actually built from a sheet of flat carbon fabric , completely by hand. There are no third party tube or lug manufacturers involved here and, somewhat paradoxically, what happens now at Trek is a more hand-built bicycle than it's ever been.

Who builds Trek?

Giant is the world's largest bike manufacturer by revenue. Its factories in Taiwan, China and the Netherlands churned out 6.3 million bicycles last year, generating revenue of $1.8 billion. The company sells bikes under its own name and makes them for major brands like Trek, Scott and Colnago.

What company owns Trek?

What are Trek bikes used for?

Trek fitness bikes are designed to provide speed that rivals many road bikes, with more predictable handling . They are a perfect choice for those who want to keep up with the fast crowd from time to time, but need something more versatile than a dedicated road bike.

Is trek a US company?

Trek Bicycles is the largest U.S. bicycle company , making everything from kid models to professional road and mountain styles. And they're the only major manufacturer still producing two-wheelers in the U.S. Overall, Trek makes roughly half of the bicycles manufactured here in the United States.

Where is the trek headquarters?

How do you classify structures?

What are some examples of frame structures?

Natural frame structures include coral, trees, spider webs, and skeletons . Man-made frame structures include bridges and bicycles.

What are examples of solid structures?

Definition: A solid structure is strong relying on solid construction materials to support loads. Examples of solid structure: Dams, bridges, granite and literate rocks, mountains, door . The force that solid structures must resist are, natural disasters, heavy winds, lots of weight pressured against it.

What are the 5 types of structures?

• Solid.
• Frame.
• Shell.
• Membrane.
• Composite.
• Liquid.

What are the 4 types of structures?

• Frame: made of separate members (usually thin pieces) put together.
• Shell: encloses or contains its contents.
• Solid (mass): made almost entirely of matter.
• liquid (fluid): braking fluid making the brakes.

What is a manufactured structure?

Manufactured structure means any structure, transportable in one or more sections, designed to be used as a single-family dwelling or commercial building with or without a permanent foundation when connected to the required utilities and includes the plumbing, heating, air-conditioning, and electrical systems contained ...

What raw materials are used to make a bicycle?

Although over the years there have been such oddities as bamboo and plastic frames, current road bikes are made of one or blends of these four materials: steel, aluminum, titanium and carbon fiber . We get into the differences below. But first, realize that fine bicycles are built of all these materials.

How are bicycle frames manufactured?

The Manufacturing

Seamless frame tubes are constructed from solid blocks of steel that are pierced and “drawn” into tubes through several stages . These are usually superior to seamed tubes, which are made by drawing flat steel strip stock, wrapping it into a tube, and welding it together along the length of the tube.

What properties should materials used to make bicycle frames have?

Often referred to as the heart of a bike, a frame can be made from either carbon fibre, aluminium, titanium, steel or a combination of these materials. Each bicycle frame material offers a list of differing characteristics that will affect the cost, comfort, weight, stiffness, strength and durability .

Where are Shimano factories?

Headquartered in Sakai, Japan, the company has 32 consolidated subsidiaries and 11 unconsolidated subsidiaries. Shimano's primary manufacturing plants are in Kunshan, China; Malaysia; and Singapore . In 2017, Shimano had net sales of US$3.2 billion, 38% in Europe, 35% in Asia, and 11% in North America.

Where are Ridgeback bikes made?

Where are GT bikes made?

GT is a division of a Canadian conglomerate, Dorel Industries, which also markets Cannondale, Schwinn, Mongoose, IronHorse, DYNO, and RoadMaster bicycle brands; all manufactured in Asia .