Which Routing Protocol Is Proprietary To Cisco? - Fixanswer

Enhanced interior gateway routing protocol (EIGRP)

is a Cisco proprietary hybrid protocol that combines the nest of advertisements in link-state protocols and the simplicity of distance vector.

What is the routing protocol convergence time defined as?

What is routing protocol convergence time defined as? It is

the time it takes for the protocol to recognize the best path in the event of a network change.

Is OSPF proprietary protocol?

OSPF (Open Shortest Path First) is perhaps the most popular

link state routing protocol

. It is an open standard so it can be run on routers produced by different vendors, which is in contrast to EIGRP, a Cisco proprietary protocol that can be run only on Cisco devices. … OSPF uses the multicast addresses of 224.0.

What are 3 common routing protocols?

Routing Information Protocol (RIP)
Interior Gateway Protocol (IGRP)
Open Shortest Path First (OSPF)
Exterior Gateway Protocol (EGP)
Enhanced Interior Gateway Routing Protocol (EIGRP)
Border Gateway Protocol (BGP)
Intermediate System-to-Intermediate System (IS-IS)

What are the main differences between the OSPF and IS IS routing protocols?

What are the main differences between the OSPF and IS-IS routing protocols?

OSPF requires an area 0, while IS-IS does not

. OSPF is a classful protocol, while IS-IS is a classless protocol. OSPF is a link state protocol, while IS-IS is not.

Is Igrp a distance vector protocol?

Interior Gateway Routing Protocol (IGRP) is a

distance vector

interior gateway protocol (IGP) developed by Cisco. … IGRP is a proprietary protocol. IGRP was created in part to overcome the limitations of RIP (maximum hop count of only 15, and a single routing metric) when used within large networks.

Which vector routing protocol is the oldest?

The distance vector (DV) protocol

is the oldest routing protocol in practice. With distance vector routes are advertised based upon the following characteristics: Distance – How far the destination network is based upon a metric such as hop count.

Is TCP a routing protocol?

TCP/IP provides two daemons for use in

dynamic routing

, the routed and gated daemons. … In addition, the gated daemon supports the Simple Network Management Protocol (SNMP). The routed daemon only supports Routing Information Protocol.

Which is the fastest routing protocol?

EIGRP

is still the fastest protocol among all three. OSPF has a slightly longer initialization time compare to RIP and both OSPF and RIP has much longer initialization time than EIGRP.

Why EIGRP is faster convergence than OSPF?

The network convergence time is faster than OSPF networks, because EIGRP network

can learn the topology information and updates more rapidly

. … As a result, data packets in EIGRP network reach faster to the destination compared to OSPF network. The packet loss in the EIGRP network is less than in OSPF network.

What occurs when a collision happens on a network group of answer choices?

Terms in this set (199) What occurs when a collision happens on a network? a.

The collision will create an error in the network switch, but otherwise, no issues will occur as a result

.

Which layer is OSPF?

OSPF and BGP belong to the

Application Layer

.

Does OSPF use UDP?

Because

OSPF does not use UDP or TCP

, the OSPF protocol is fairly elaborate and must reproduce many of the features of a transport protocol to move OSPF messages between routers.

Is OSPF unicast or multicast?

OSPF packets are

unicast

on an NBMA network. P2MP—No link is P2MP type by default. P2MP must be a conversion from other network types such as NBMA. On a P2MP network, OSPF packets are multicast to 224.0.