Your CD-ROM should have at least two cables connected to it: a Molex power cable and
an ATAPI / IDE or SATA cable
. The IDE or SATA cable should also connect to the motherboard or another interface card, and the power cable should connect to the power supply.
How do I connect to a CD-ROM?
- Power down the PC completely. …
- Open the computer to install the CD or DVD drive. …
- Remove the drive slot cover. …
- Set the IDE drive mode. …
- Place the CD/DVD drive into the computer. …
- Attach the internal audio cable. …
- Attach the CD/DVD drive to the computer using an IDE cable.
What connector does a CD drive use?
Your drive either uses a
SATA power cable
(left) or a Molex power cable (right). SATA power connectors are almost always black; Molex connectors are almost always white. Both of them only fit one way — the right way.
What is SATA power connector used for?
Serial ATA (SATA)
The Serial ATA or SATA connector is used as
an interface for connecting a host bus adapter to a mass storage device or optical drive
. This connector was designed to replace the older connectors, 34-pin, 40-pin, etc.
What connector do DVD drives use?
DVD/Blu-Ray drives and recorders typically use the
SATA connection
. The SATA power cable is slim and flat.
How do I insert a CD into my HP desktop?
Straighten the
paper clip
and insert it into the manual release hole until resistance is felt. Press in gently on the paper clip until the tray is released. Releasing the lock will allow the tray to open a small distance. Remove the paper clip and gently pull out the drawer until the disc is accessible.
How do I load a CD on Windows 10?
If installation doesn’t start automatically, browse the disc to find the program setup file, usually called
Setup.exe
or Install.exe. Open the file to start installation. Insert the disc into your PC, and then follow the instructions on your screen. You might be asked for an admin password.
How do I connect an external CD drive to my computer?
You can use an external CD drive on both your desktop and laptop.
Insert one end of the USB cable into the external CD
drive. Plug the other end of the cable into your computer’s USB port. Allow the computer to install the drivers for your external CD drive.
How do I install software from a CD drive?
- Insert the software installation disc into the CD/DVD drive.
- If an AutoPlay window appears, click Open folder to view files. …
- Select all files and folders, then right-click and select Copy. …
- Insert a USB thumb drive into a USB port on the computer that has a CD/DVD drive.
Does it matter what SATA port I use?
Yes, to an extent,
it does matter which SATA port you use
. However, it also largely depends on the motherboard model and the SATA port version it features. For instance, if you have a recent motherboard model with all the ports being SATA 3, you can use any port to connect your SATA 3 drive.
Where do I plug in SATA power?
For SATA data (the smaller connector), you plug it into a
SATA port on the motherboard
. Placement varies from board to board, but the majority of motherboards have them positioned along the right side of the board, most commonly just below the 24 pin power connector.
What does a SATA power connector look like?
SATA cables are
long, 7-pin cables
. Both ends are flat and thin, with one often made at a 90-degree angle for better cable management. One end plugs into a port on the motherboard, usually labeled SATA, and the other (such as the angled end) into the back of a storage device like a SATA hard drive.
For what can we use IDE connector?
IDE, an acronym for Integrated Drive Electronics, is a standard type of connection for storage devices in a computer. Generally, IDE refers to the types of cables and ports used
to connect some hard drives and optical drives to each other and to the motherboard
.
Do hard drives use SATA cables?
Most hard drives will have the option for
both Molex or SATA
power connections, and you can use one or the other as you like. The two different types together look like this: These are the two options for connecting power to your hard drive. … You’ll need a SATA cable to connect your new hard drive to your motherboard.
Do SSD drives use SATA cables?
To install the SSD as a secondary drive (not your primary or boot drive), use a
SATA cable
and attach one end of the cable to the SATA connector on your motherboard. … Then, use an available SATA power cable coming from your system’s power supply and connect the cable to your Crucial SSD.
