The slot in the dist/oil pump drive gear should point to the front left intake bolt when #1 is at TDC.
What is Dodge firing order?
The firing order for Jeep/Dodge RAM/Durango 3.7L V6 engines is 1-6-5-4-3-2. Chrysler firing orders. The correct firing order is very important because mixing up the spark plug wires may prevent the engine from starting, cause it to backfire and run very poorly if at all.
What's the firing order on a Dodge 360 engine?
V8-318 and 360 EnginesEngine Firing Order: 1-8-4-3-6-5-7-2Distributor Rotation: Clockwise: V8-400 and ...
What's the firing order for a small block Chevy?
Chevy Small (SBC) and Big Block (BBC) V8 Firing Order The Chevy V8 firing order for small and big blocks is 1-8-4-3-6-5-7-2. That means cylinder number 1 fires first, then cylinder number 8, next cylinder number 4, and so on.
How do you tell if its a 318 or 360?
Another way is you could look at the harmonic balancer, if it is a skinny, flat one it is a 318, a 360 one will be thicker and have a counter weight on the face.
Are 318 and 360 blocks the same?
Nope, not the same. Bore size 318 is 3.91. Bore size 360 is 4.00. Crank is different as well.
Are 318 and 360 heads the same?
318 and 360 magnum heads are the same casting. 58cc chambers and 1.92/1.625 valves. Your 360 heads are probably just 1.88/1.60 and something like 75cc.
Can I put 360 heads on a 318?
You can run the 360 manifold on the 318 heads just use the 360 intake caskets. Your really only other option would be to get a manifold made for a 318.. Most Edelbrock manifolds are 360 runner sized already but they fit a 318. Motor looks great.
Will a 318 intake fit a 360?
Aside from those changes, there is zero difference between the manifolds for 318, or 360. Manifolds just vary slightly according to year of manufacture.
Are 318 good engines?
The Good And The BadIn terms of durability, the Mopar 318 is robust. The bottom end of most 318 engines used a cast-iron crankshaft, and though these are not as desirable as a forged crank, the cast-iron piece has proven to be very reliable.
Can a 318 be bored to a340?
just not possible. IF you want to use the 318, put a stroker crank in it and make a 390 out of it or build a 360 and be done with it. i've heard some say that the 68-69 la 318s you could bore . 090 over because of the steel that it is made out of and the walls are thicker.
What cars had a 318?
The 318 initially powered the Dodge Dart and Demon and the Plymouth Barracuda, Scamp and Duster. Ultimately, virtually all Dodge cars were equipped with the optional 318.
How much HP can a 318 handle?
It can easily make 400 plus horsepower and still has great street manners. If you're building for fuel economy, the 318 beats the Mopar 340 and 360, hands down. The 318 was produced in three versions: polysphere, LA series, and Magnum.
Can you put 340 heads on a 318?
The 2.02 valves on a 340 head are complete overkill on a 318 unless you are running it constantly in the higher rpm's. The larger valves can actually hurt your low end.
What is the difference between a 318 and 340?
340 4.04 bore X 3.31 stroke! If you're going to use a 340 cam, put 360 heads(1.88 intake) on it Any scrapyard smogger heads will work. The 318 head has small ports and valves that are not compatible with 340 cam and intake. If you don't want to change the heads, go to a 360 2bbl camshaft .
