Who Can Work On A Fixed Ladder That Extends 24 Feet OSHA?

by | Last updated on January 24, 2024

, , , ,


Qualified climbers

may continue to climb billboard fixed ladders (over 24 feet) without fall protection during the two-year phase-in period for installing some type of fall protection (i.e., cage, well, ladder safety system, personal fall arrest system) on those ladders.

Which of the following must be provided when the length of climb of a fixed ladder?

29 CFR 1926.1053(a)(19) states that

fall protection

must be provided whenever the length of climb on a fixed ladder equals or exceeds 24 feet. A fixed ladder is “a ladder that cannot be readily moved or carried because it is an integral part of a building or structure” (§1926.1050(b)).

What is your employer required to have on fixed ladders that extend more than 24 feet quizlet?

Your employer is required to have

ladder safety or personal fall arrest systems

for fixed ladders that extend more than 24 feet, and any worker ascending these ladders must be a qualified climber with additional training.

Which of the following answer options are your employer’s responsibility OSHA?

Answer: Employers

have the responsibility to provide a safe workplace

. Employers MUST provide their employees with a workplace that does not have serious hazards and follow all OSHA safety and health standards. Employers must find and correct safety and health problems.

What are some of the things your employer should do to prevent worker falls and accidents using portable ladders at the workplace?

The 3 keys to preventing falls from portable ladders are:

Choosing the right ladder for the job

. Tying the top and bottom of the ladder to fixed points when necessary. Keeping your hands free of carrying tools or other materials when climbing a ladder.

What is the OSHA standard for ladders?

Each step or rung of a fixed ladder must be able to support a load of

at least 250 pounds

(114 kg) applied in the middle of the step or rung. Minimum clear distance between the sides of individual rung/step ladders and between the side rails of other fixed ladders must be 16 inches (41 cm).

What is the maximum height you can work from a ladder?

What is the maximum height a ladder can be used?

There is no maximum height for using a ladder

. However, where a ladder rises 9 metres or more above its base, landing areas or rest platforms should be provided at suitable intervals.

What safety device could be used with a fixed ladder?

Options for ladder safety devices include an (1)

overhead self-retracting lifeline system

or (2) a ladder cable or rail system that is attached to with a full body harness, short lanyard, and frontal D-ring.

Do ladders expire?

You should always check your ladders before use for cracks, bends or breaks in any part of the ladder. … Remember that

there is no expiration date for ladders

, so as long as you follow proper storage techniques and treat it with care, your ladder could last you an extremely long time.

What is standard ladder rung spacing?

The distance between rungs, cleats, and steps shall

not exceed 12 inches

and shall be uniform throughout the length of the ladder. The minimum clear length of rungs or cleats shall be 16 inches.

What are the 4 OSHA standards?

There are four groups of OSHA standards:

General Industry, Construction, Maritime, and Agriculture

. (General Industry is the set that applies to the largest number of workers and worksites). These standards are designed to protect workers from a wide range of hazards.

What is the best way to ensure OSHA will conduct a site inspection?

Question: If you think a hazard is serious, what is the best way to ensure that OSHA will conduct a site inspection? Select the best option

Submit a complaint online Submit a complaint over the phone Fill out most of a report and mail it to OSHA Mail a fully complete and signed report to OSHA

.

Who is responsible for safety on a construction site?

OSHA states that

if you are the primary contractor

on a construction site, you may maintain responsibility for safety even if there are subcontractors on the site as well. Regulations state that the prime contractor maintains overall responsibility in ensuring everyone on the site complies with safety regulations.

Did the employer use a disciplinary program to retaliate against Carla?

Did the employer use a disciplinary program to retaliate against Carla for reporting a workplace injury? … His employer disciplines

Ricardo

for failing to report his injury “immediately” as required by the employer’s injury reporting rules.

What are the five things Construction companies must do to protect their workers from fall hazards?

  • Provide the Proper Equipment. …
  • Provide a Safe Work Space + Create a Safety Plan. …
  • A full, fall prevention and safety plan should be created and implemented before any construction begins on your projects. …
  • Inspect Construction Site Every Day. …
  • Clean Up Site Everyday at End of Day.

At what height must you wear a safety harness?

OSHA requires that fall protection be provided at elevations of

four feet in general industry workplaces

, five feet in shipyards, six feet in the construction industry and eight feet in longshoring operations.

Jasmine Sibley
Author
Jasmine Sibley
Jasmine is a DIY enthusiast with a passion for crafting and design. She has written several blog posts on crafting and has been featured in various DIY websites. Jasmine's expertise in sewing, knitting, and woodworking will help you create beautiful and unique projects.