This is the most common reason for a washing machine refusing to spin.
Modern machines have a balance detector which will stop the spin feature from operating if the load is unevenly distributed
. This is most likely to happen if you've overloaded the machine, or conversely if you've put too light a load in.
What is the problem if the washing machine wont spin?
If the belt mechanism is loose or slipped or the belt is damaged, it may not be spinning with enough force.
If the belt is broken or fully off the rollers
, then it won't spin at all. A washer that won't spin isn't washing. If it can't agitate clothes, then clothes don't get clean.
How do you fix a washing machine drum that won't spin?
- Depending on your model, remove the backplate to access the motor.
- Once you have access remove the motor.
- Check for wear on the carbon brushes and replace if required.
Why are my clothes too wet after the spin cycle?
Overloading can lead to an imbalance that reduces the washer's spin speed
, leaving clothes too wet after spin cycle completes. If the washer leaves clothes soaked after a large load, remove some items, redistribute others and run another rinse and spin cycle.
What would cause a front-load washer not to spin?
Front-load washer tubs spin thanks to a drive belt that runs off of the motor.
A loose, frayed, or torn belt
could be why your washer won't spin. Overloading your washing machine can cause the belt to loosen or become worn out. Inspect the drive belt closely.
Should a washing machine drum spin freely?
The spin basket on your washer should not turn freely
. The basket has a brake to stop it when the washer turns off or the lid is opened. If the washer has an odor, you might want to check the drain hose.
How do I know if my washing machine belt is broken?
Signs The Belt In Your Washer Is Bad
When the belt in your washer begins to wear down, it may slip occasionally. This can create a
squealing noise
that gets louder as the belt breaks down over time. You might also smell burning rubber.
How do I know if my washing machine drum is broken?
- It's not kind to your clothes… or the environment. …
- The drum won't spin at the end of the cycle. …
- The machine still works but the water hasn't drained. …
- It's more noisy than it should be. …
- It's no longer big enough for your family. …
- It's much older than your latest smartphone.
What do I do if my laundry is too wet?
- Check the cycle used. If possible, switch to a higher-speed spin cycle.
- Make sure the drain hose isn't kinked or restricted.
- Check the size of the load. An overloaded or underloaded washer can become unbalanced and spin at a reduced speed. …
- Don't use an extension cord.
Does Spin Cycle drain water?
It
removes the water from the tub during
the spin cycle. The washer pump forces water from the bottom of the machine into the drain hose. The drain hose loops to the top of the machine, and then down to the drain, enabling the tub to fill. When the water reaches the bend in the hose, it goes out of the drain.
Why is my washing machine stuck on spin?
If resetting the washer did not work, then it most likely means that
your timer is malfunctioning
. The washer could have gotten stuck on any cycle, unfortunately, it just got stuck on spin. Now you can disassemble the control panel of the washer to test the timer with a multimeter and replace it if necessary.
How do you realign a washing machine drum?
Top-loading washers
automatically adjust to level
. If something has shifted, you can relevel a top-loading washer by tipping the washer forward, then placing it back on the floor. Front-loading washers level by turning a leg to raise or lower it.
Should a washing machine drum wobble?
Washers do tend to wiggle a small amount when the drum spins
, especially during high-speed spin cycles. This can be considered normal, but it can also be unpleasantly noisy or shake nearby objects.
