When the “Perform Service” indicator comes on, this lets you know your Jeep has reached its scheduled mileage for needing regular maintenance . This means you need to take it to a professional to have specific fluids swapped, tires rotated, or something similar.
What does it mean when your car says performance service?
The service required light is mainly used to remind drivers when it is time to change the oil and filter, but could be used for other fluids or components. In the past, this light was similar to the check engine light and could mean that a fault has been detected by the system.
Why does my Jeep Cherokee say perform service?
Low fuel warnings, tire pressure monitors and service-required messages. The Jeep Grand Cherokee limits the service-required message to indicate the routine maintenance needs of the vehicle . The light needs to be manually reset when the indicator turns on.
Why does my 2004 Jeep Grand Cherokee says perform service?
“Perform service” only means that the preset service limit for the engine oil change is reached . You can change the service distance by yourself.
What does perform service mean on 2006 Jeep Grand Cherokee?
Needs to perform the manufacturer’s suggested maintenance service . It could be as simple as an oil and filter change – based on mileage and previous maintenance records. After the service the repair shop will reset the warning light.
Can I still drive with maintenance light on?
It’s a light that remains active permanently , letting you know that you need to go for an oil change in a certified auto shop. ... It’s important to know that the light itself doesn’t mean that your car is damaged, so you can still safely use your vehicle while the light is on in your dashboard.
How do I reset my jeep dashboard?
- Turn the ignition switch to the “ON” position without starting the vehicle.
- Press the gas pedal to the floor slowly three times within 10 seconds. Turn the ignition off. Wait 10 seconds and start the engine.
How do I reset my Jeep Cherokee?
- Disconnect the battery by removing the positive battery cable.
- Ground the positive cable to the negative cable for 30 seconds to erase the electric charge in the capacitors.
- Reconnect the positive cable to the battery.
- Turn the key to on but do not start.
- Turn the headlights on.
How do I reset the check engine light on my Jeep Grand Cherokee?
To turn off the Jeep Grand Cherokee check engine light, turn the ignition switch to ON but don’t start the vehicle. Press the gas pedal 3 times within 10 seconds and turn the ignition off . Wait 10 seconds and start the engine.
How do you reset the mileage on a Jeep Grand Cherokee?
To reset both the trip mileage and mileage to service, press and hold ‘SELECT’ until a few chimes sound . Then let go of the ‘SELECT’ button.
How do you reset the perform service on a 2006 Jeep Grand Cherokee?
Locate the “Step” button on the Grand Cherokee’s instrument panel and press it. Press it again until it says “Miles to Service.” Press in and hold the button for about five seconds . It should read “Reset.” This will turn off the service light on the display.
Why is my maintenance required light still on after oil change?
Most often this just means your vehicle might be due for an oil change. The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset .
What is the longest you can go without an oil change?
Cars can generally go 5,000 to 7,500 miles before needing an oil change. Furthermore, if your vehicle uses synthetic oil, you can drive 10,000 or even 15,000 miles between oil changes.
