It can be caused by
Bluetooth interference or sound bar is operating without a rear satellite kit
while signal source is configured to deliver true surround sound. There is no solution to the former other than hardwiring at times of heavy Bluetooth device traffic in the vicinity.
Why does my surround sound keep cutting out?
The sound cuts in and out intermittently from one or more speakers. …
Verify the speaker wires are properly connected to both the speakers
and the A/V receiver. Turn off any nearby electronic devices that may be interfering with the speaker sound. Move the speaker wires away from any electrical cords.
Why does my LG TV sound keep cutting out?
Most audio problems are caused by
incorrect menu settings on the TV or external devices
. Performing a Sound Test will either confirm or eliminate the TV as the source of the problem. Subsequent sections will help to determine the audio problem when an external device is attached to the TV.
Why does my wireless subwoofer cut in and out?
The sound on your wireless subwoofer can
drop out if there is interference or a physical obstruction between the soundbar and subwoofer
. You can try checking the firmware version, resetting, and reconnecting the subwoofer.
Why does my Bluetooth sound bar keep cutting out?
A Bluetooth speaker may cut out for one of many reasons, including:
Low battery
.
Interference from other electronic devices or radio waves
.
Your device is not compatible or no longer supported
.
Why is my radio cutting in and out?
There
may be a break, weak point, or loose connection in the wiring between the SiriusXM antenna and the tuner
. Or there could be the same issues in the wiring between the tuner and your stereo. This can affect the sound quality and it may cause the radio to cut out often.
Why does my TV sound keep cutting in and out?
Intermittent audio can
be electronics in the Review
, bad cable or contacts, or the TV itself. Start by reseating the HDMI cable at both ends; check to see if the contacts are dirty. Use another HDMI source (borrow if you don't have one) to see if it's the Review. Finally, see if another HDMI TV eliminates the problem.
Why does my Samsung TV sound keep cutting out?
If your Samsung TV audio cuts out, one of the biggest culprits could be
the Anynet setting
. This setting, when turned on, can essentially hijack your sound. To turn off Anynet, click ‘Menu' from your remote > select ‘General' > select ‘External Device Manager' > click ‘Anynet+ (HDMI-CEC) > ‘Enter' > ‘Off.
Why does my HDMI keep cutting out?
The most common course for a problem is
a bad connection between the HDMI cable and the device
. … A simple HDMI cable tester might tell you if the cable is wrong or you can simply try another cable and hopefully this will rectify the problem and give you the image that you need.
How do I reset the sound on my LG TV?
If you are experiencing an issue with your Audio or Video, you can easily reset you're A/V to factory settings.
Press the Mute button on the remote control 3 times, then click AV Reset
. The “Resetting AV values” message will appear at the top of the screen.
Why does my LG subwoofer keep cutting in and out?
It can be caused by
Bluetooth interference or sound bar is operating without a rear satellite kit
while signal source is configured to deliver true surround sound. There is no solution to the former other than hardwiring at times of heavy Bluetooth device traffic in the vicinity.
Is Dolby Digital or PCM better?
Pulse-Code Modulation is the typical method used for converting analog audio into its digital counterpart. When you see PCM audio on a DVD, it's a two-channel stereo digital audio track. … From a technical standpoint, most people would consider
PCM to be worse than Dolby Digital
because it offers fewer channels.
How do I stop my LG sound bar from turning off?
Press (Mute) to mute your unit
. To cancel it, press (Mute) again on the remote control or change the volume level. The LED on the unit turns off if no key is input for 20 seconds.
Why does my boom 3 keep cutting out?
Music drops out occasionally
— you could be experiencing interference. Make sure your speaker has
enough battery power
(connect it to a power source with the supplied adapter). Adjust the volume on both the audio source and your speaker. Restart both your speaker and the audio source.
Why does my receiver keep shutting off?
In many cases, premature shutoff of your unit can be caused by
a problem with the speaker wiring between the receiver and speakers
. A single strand of wire in the wrong place (causing a short circuit condition) will cause the unit to shut off at anything but very low volume levels.
