Why Does My Sony Blu-Ray Player Keep Freezing?

Attempt a power reset to resolve this issue . To perform the power reset, press and hold the POWER button on the front of the Blu-ray Disc® player for 10 seconds. The Blu-ray Disc player should turn off.

Why does my Blu-Ray player keep freezing?

When a Blu-Ray title freezes or skips during playback it’s usually firmware or memory related . You would first verify that your Blu-Ray / Universal player has the latest firmware update installed. ... If both the firmware update and/or SD Card fail to correct the issue, then your unit may require service.

How do I fix my blu-ray player from freezing?

1. Unplug the power cord of the Blu-ray Disc player from the electrical outlet.
2. Let the player remain without power for one minute.
3. Plug the power cord back into the electrical outlet.
4. Turn on the Blu-ray Disc player.

How do I reset my Sony Blu-Ray player?

1. On the supplied remote control, press the HOME button.
2. Select Setup.
3. Select Resetting or icon.
4. Select Reset to Factory Defaults Settings.
5. Select All Settings.
6. Select Start.
7. Select Close.
8. Turn off your device, then turn it back on.

Why does my Sony DVD player freeze?

Player Problems If the playback problems are not limited to a single disc, the problem may lie in your DVD player. Dust or other debris inside the player can partially block the laser beam , preventing a clean read from the disc and causing skips and freezes as the hardware attempts to decipher the data.

How do you unfreeze a Sony Blu-Ray player?

To perform the power reset, press and hold the POWER button on the front of the Blu-ray Disc® player for 10 seconds . The Blu-ray Disc player should turn off. If it does not turn off, unplug the power cord from the electrical outlet.

How do I update my Blu-Ray player?

Power on the Blu-ray Disc player. If there is a disc in the player, please remove the disc. At the Home Screen menu, use the arrow keys on the remote control to select Setup – Software Update and then press the ENTER button. A New Software Version available message will be prompted.

How do I stop my DVD player from freezing?

1. Eject the DVD and clean it, using a soft, non-abrasive cloth and a center-to-rim motion.
2. Make sure the DVD is clean and unscratched. ...
3. Try cleaning your DVD player, as you could have a build-up of dust in the DVD player and on the optical lens.

How do I reset my Sony Blu-ray player without a remote?

1. Turn off and unplug the Blue-Ray player, let it rest for 30 seconds.
2. Press and hold the open/close button on the front of the player, reconnect the power cord, then release the button.

How do you fix a CD that freezes?

1. Inspect the DVD on both sides. ...
2. Get your cloth. ...
3. Run water over the dirty surface of the DVD. ...
4. Wipe the crud off the DVD carefully, from the center out. ...
5. Don’t put too much pressure on the cloth.

How do I fix my Sony Blu-Ray player?

1. Remove the disc from the Blu-ray Disc player.
2. Turn off the Blu-ray Disc player.
3. Unplug the power cord of the Blu-ray Disc player from the electrical outlet.
4. Let the player remain without power for one minute.
5. Plug the power cord back into the electrical outlet.

Why is the sound not working on my Blu-Ray player?

Make sure the Audio device is set to the correct input. Try a different audio cable, your cable may have stopped working. Try to hook the Blu-ray Player directly to the TV, or try to hook the audio cable to a different sound device. Try to unplug the Blu-ray Player, then plug it back in.

How do I unlock my Sony Blu-Ray player?

Press and hold the PAUSE or the STOP button on the Blu-ray Disc player for approximately 10 seconds until LOCKED is displayed on the front panel display. NOTE: Depending on the model, you will have to press either the PAUSE button or the STOP button.

What causes DVD player to freeze?

Player Problems

Dust or other debris inside the player can partially block the laser beam , preventing a clean read from the disc and causing skips and freezes as the hardware attempts to decipher the data. Using a lens cleaning disc can remove these impediments, restoring normal playback functions.

Can you fix a DVD that freezes?

To get rid of skipping or freezing, you need to clean your DVD player or DVD drive regularly . If cleaning doesn’t help solve the issue, you may need to buy a new device. Alternatively, you can rip DVD to a digital file with WinX DVD Ripper Platinum and play the content without using DVD player or DVD drive.

Why does my DVD player keep buffering?

DVDs can skip for a number of reasons. Dust might have accumulated on the surface of the DVD , the disc might be scratched, or the DVD player itself might not be working properly. Clean the surface of the DVD, rub out any scratches, and clean your DVD player to stop your DVD skipping in future.