Wire cutters are commonly
used to cut copper, brass, iron, aluminum, and steel wire
. Some wire cutters have insulated handles which ensure that you will not get shocked from the wires you’re working with. Diagonal cutters
What can I use if I don’t have a wire cutter?
- 1 – Bend it. If the wiring in question is on the thinner side and relatively pliable, you could try bending it. …
- 2 – Hacksaw. …
- 3 – Tin Snips. …
- 4 – Reciprocating Saw. …
- 5 – Angle Grinder.
Do I need a wire cutter?
Regardless of whether the job you’re on is big or small, a
capable wire cutter
is a good tool to have on hand. Wire cutters can help you make fast, clean cuts in most types of wire including copper, brass, steel, building wire, and others.
Can I cut wire with pliers?
Do not use pliers as
a hammer. Do not hammer on pliers or wire cutters to cut wires or bolts. Do not extend the length of handles to gain greater leverage. Use a larger pair of pliers for gripping or a bolt cutter for cutting.
How do you cut a wire hanger without a wire cutter?
- 1 – Bend it. If the wiring in question is on the thinner side and relatively pliable, you could try bending it. …
- 2 – Hacksaw. …
- 3 – Tin Snips. …
- 4 – Reciprocating Saw. …
- 5 – Angle Grinder.
Can I cut a wire with scissors?
Scissors, clippers, and the like
just aren’t made to cut wire
. Chances are you’ll end up with dull scissors or clippers from trying to cut the wire, or worse—you’ll completely damage or ruin the tool. These aren’t sharp enough to cleanly cut wire, so the wire will end up being bent out of shape.
What are the dos and don’ts in using hand tools pliers?
- Never expose these pliers to excessive heat.
- Don’t bend stiff wire with the tip of the pliers.
- Never rock the pliers side to side when cutting.
- Never pry with the nose of the pliers.
- Never attempt to cut a “HOT” wire.
What tool do you use to cut wire?
Choosing a Cutting Tool. Use
Lineman’s pliers
to splice or cut electrical wires. Lineman’s pliers have their cutting device on the side, and they are used for many different construction and electrical jobs. If you need to grip, strip, or cut any sort of electrical wire, this is the safest choice.
What is the best tool to cut wire?
- Our pick. Channellock E337CB Diagonal Cutting Plier. Strong cuts, comfy grips. …
- Budget pick. IRWIN VISE-GRIP Diagonal Cutting Pliers, 6-Inch (2078306) Quality at a bargain. …
- Also great. Bahco 2101G-180 Ergo Cutting Pliers. Great features, not as strong. …
- Also great. Klein 11054 Wire Stripper-Cutter.
What can I use to cut thick wire?
It’s possible to use
a hacksaw
to cut wire if no cutter is available. You’ll want to use a blade with a high teeth-per-inch (TPI) count for as clean a cut as possible. Regardless of the TPI count, using a hacksaw to cut wire is difficult unless the wire has a large diameter.
Is it safe to cut a cable wire?
A:
Cable and phone wires don’t carry current, so it’s safe to remove them
. However, it’s critical not to cut into a power line, as you know. … Find it by doing a Web search for the words “Pepco equipment responsibility.” The wire to your house is Pepco’s responsibility; past the weather head, it’s yours.
How do you cut a hanging wire?
Attach the Picture Wire
Insert about 5 inches of picture
wire through one of the D-rings from below
. Once through the D-ring, pull this end underneath the wire that will go across the picture, then put it through the D-ring again from above. Pull the wire up through the loop, and that is the finished knot.
What do wire cutters look like?
Flush cut wire cutters (also called “combination” or “lineman’s pliers”) look like
an ordinary pair of pliers
but feature a pair of cutting blades flush to the outside edge and directly behind one of the plier’s gripping jaws.
What is the easiest way to strip copper wire?
- Burn the insulation off in a fire. …
- Remove the insulation with a sharp knife. …
- Strip the insulation with a homemade gadget. …
- Cleaning wire with a manual wire stripping machine. …
- Strip that wire and build your scrap metal business with a StripMeister Original Automatic Wire Stripping Machine!
What should you never use a screwdriver for?
Do not use a screwdriver for
prying, punching, chiseling, scoring, scraping or stirring paint
. Do not use pliers on the handle of a screwdriver for extra turning power.
Do and don’ts using pliers?
- Always protect your eyes when using pliers by wearing safety glasses or goggles.
- Never use linesman pliers or any other type of pliers to cut a “hot” electrical wire. …
- Don’t expose your pliers to excessive heat. …
- Don’t use your pliers in place of a hammer or mallet.
