If there is plenty of ink and the printer does not print, clean the Print Head then print the nozzle check pattern to ensure ink is ejected properly . ... If the problem still persists, the Print Head may be damaged. Contact a Canon service representative.
How do I fix a Canon printer that won’t print?
The solution is to restart the Canon PIXMA printer, system, and the wireless router. Turn the Canon PIXMA printer On and do not continue for ten seconds. Remove the power cable from the printer’s rear to solve the Canon printer won’t print wirelessly issue.
What to do if Canon printer is not printing?
- + How to Reset the Printer.
- + How to troubleshoot network communication issues with the printer.
- + Reinstall the printer driver.
- + Wi-Fi® Communication.
- + Reboot Router/Modem.
Why is my Canon printer not printing when the ink is full?
If the print quality is poor or no ink is appearing on the page, it may be due to one of the following: Ink in the Bubble Jet (BJ) cartridge or tank has run out . Printhead nozzles on the cartridge may be clogged. Protective cap or tape may be attached to the cartridge.
Why is my printer connected but not printing?
My printer won’t print
Make sure there is paper in the tray (s), check the ink or toner cartridges aren’t empty, the USB cable is plugged in or the printer is connected to Wi-Fi. And if it is a network or wireless printer, try using a USB cable instead.
What to do if the printer is not printing?
- Check Your Printer’s Error Lights. ...
- Clear the Printer Queue. ...
- Solidify the Connection. ...
- Ensure You Have the Right Printer. ...
- Install the Drivers and Software. ...
- Add Printer. ...
- Check that Paper Is Installed (Not Jammed) ...
- Fiddle With the Ink Cartridges.
How do I get my Canon printer to print?
- Connect your device with the network.
- Go to the iTunes or Google Play app store and select the Canon app. ...
- Open the document or image you want to send to your printer and select print.
The reset procedure of the Canon printer is very simple. Find the Stop button on the control panel of the printer . Press the Stop button and hold it for a few seconds. Do not release it until the Orange color Alarm lamp blinks 21 times.
How do I run a diagnostic on my Canon printer?
Select Start on the Windows task bar, and then select Printers and Faxes. Right-click on the corresponding printer driver icon. Select Properties from the pop-up menu. Select the Print Test Page button .
How do I troubleshoot my Canon printer?
Navigate to your computer’s “Control Panel” and click on the “Printers and Faxes” option . Click on the “Add A Printer” button if your Canon printer isn’t showing up in the list. Follow the on-screen instructions so that your computer will run a test to try to detect the printer.
Why is my Canon printer not printing blue?
Check if the ink tank for the problem color is empty. If the ink tank is not empty, perform print head cleaning and try printing the nozzle check pattern again. ... If print head deep cleaning does not resolve the problem, the print head may be damaged. Contact your nearest Canon service center to request a repair.
How do I reset my Canon printer?
- Press Setup.
- Press the arrow buttons until you navigate to Device settings and then press OK.
- Press the arrow buttons until you navigate to Reset setting and then press OK.
- Press the arrow buttons until you navigate to Reset all and then press OK.
- Select Yes.
- Press OK. Your device is now reset.
How can you tell if a printhead is clogged?
- Your prints are low quality, meaning they are faded, streaked or lined.
- A blank page print out could mean that your printhead is clogged.
- White lines across the page.
- Broken lines or grid patterns appear on prints.
- Track marks.
- Smear marks.
- Some colors are missing.
Why is my HP printer connected but not printing?
Make sure your devices are properly connected with each other , and the network or the cable you use to connect these devices is normal. You can also try restarting your HP printer. Turn it off completely and unplug the power cord, leave it for a couple of minutes, and then plug the cord back and power on the printer.
Why is my printer connected but not printing brother?
The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine is lost . This can occur as a result of wrong settings or configuration of the printer driver. ... Once you are able to print, enable your firewall again.
How do you troubleshoot a printer problem?
- Check to make sure the printer is turned on and connected to the same Wi-Fi network as your device. ...
- Run a printer power cycle. ...
- Set your printer as the default printer. ...
- Clear the print queue. ...
- Reset the service that manages the printing queue.
