Common solutions for: Chainsaw not cutting
The most common cause of a chainsaw that won't cut properly is a dull cutting chain.
Try sharpening or replacing the chain
. The chain may not have the proper amount of tension. If the adjustment screw is too loose, the chain may not make good contact with the wood.
Why does my chainsaw smoke and not cut?
This most commonly is a result of
a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut
. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Why does my chainsaw burn the wood?
Your chainsaw burns wood because of
poor lubrication
Lubrication allows the mechanical parts to coordinate much better by avoiding a phenomenon of friction which risks causing traces of burns. This is one of the main reasons that your appliance gives off too much heat and that the wood burns.
Why is my chain saw not working?
A saw that won't start or runs rough can cause you to think the carburetor is out of whack, but
it may just be a neglected air filter
. If the filter is clogged, the ratio of air to gasoline in the carburetor will be off. This can lead to a fouled spark plug and a clogged spark arrester screen inside the muffler.
How do I know if my chainsaw chain is backwards?
Why does my chainsaw stick?
Chain tension
Indeed, if a chainsaw chain that slackens with wear no longer cuts, it damages the guide, tires the engine and can be the cause of a blockage when it is too tight. In addition, the more the chain saw heats up, the more the tension of the links decreases, until they become too relaxed.
Why is my chainsaw not oiling the chain?
Why does my chainsaw chain dull so quickly?
Dirt Causes A Chainsaw To Dull
If you're cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
How tight should a chainsaw chain be?
Is it worth sharpening a chainsaw?
Sharpening your chainsaw chain is definitely worth it
as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
Is Wet wood harder to cut?
Wet Wood Vs Dry Wood
But
wet wood is actually much easier to cut than dry wood
. With dry wood lacking moisture content, more friction is created as the chainsaw chain comes into contact with the wood fibers. This friction results in the chain slowing down.
How often should you replace your chainsaw chain?
The chain sprocket must be replaced
if the depth of the wear marks reaches about 0.5mm
, i.e. the wear limit. A seriously worn chain sprocket can cause the chainsaw chain and guide bar to wear at an increased rate, as well as reducing cutting performance too, so it's important to keep an eye on.
How do you start a stubborn chainsaw?
Try to start the chainsaw after priming the carburetor. 5.
Activate the choke by moving the lever to the full choke position and pull the starter rope 3 or 4 times to start the engine
. If that doesn't work, move the choke lever to half choke and pull the starter rope, 6 times maximum, to start the engine.
How do you reset a chainsaw chain?
How do you prime a chainsaw?
Which way should chainsaw teeth face?
The direction of the chainsaw blade is always the same regardless of the type or model of chainsaw. So the sharp edges of the blade should always face the
clockwise direction
. If you check from the top, you will notice that the sharp edges are facing the direction opposite the chainsaw body or motor.
Which way does a saw blade go?
How do you sharpen a chainsaw?
How long do chainsaws stay sharp?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn't get too dull. On average, a chainsaw blade will retain its sharpness for about
3 hours
of actively cutting through wood.
How do you unclog a chainsaw oiler?
How do I know if my chainsaw oil pump is bad?
Generally speaking, the signs of a chainsaw oiler problem are easily spotted.
If the chainsaw seems like it's getting too hot or producing smoke
, that is a sign that there is an oil deficiency in the chain. This is not good for the life of your chainsaw. If you spot this problem, it is time to troubleshoot the issue.
How do you clean a chainsaw oil pump?
Clear any sawdust, congealed lubricant and dirt out of the oil outlet hole on the guide bar
. Keep the oil pump tank clean: even if it is equipped with a filter, wipe away all dirt around the cap before refuelling. Regularly check and clean the tank vent and the filter itself.
How can I make my chainsaw chain cut faster?
How long should chainsaw blades last?
The lifetime of a chainsaw chain has no fixed limit and depends on usage and maintenance. The chain should last many years;
5-6 years
should be no problem. However, if the chainsaw chain is used properly and taken care of, it can last way longer.
Why does my chainsaw cut curves?
Two main reasons will cause the chain to cut on a curve. The most common reason is from
improper hand filing
. If one side of the teeth is more heavily damaged, sharpening them down will make them smaller than the other side.
