If the water inlet valve is defective, or if it has insufficient pressure , it won’t allow water to flow through. As a result, the ice maker won’t make ice. The valve requires at least 20 psi to function properly. Make sure that the water pressure to the valve is at least 20 psi.
How do I reset my ice maker?
- Adjust the Feeler Arm. The first step to resetting your ice maker is for you to adjust the feeler arm. ...
- Press the Reset Button. ...
- Restart the Refrigerator.
Why does my ice maker not work?
Cause: A common cause for a clog is frozen water in the line . ... Cause: There is also a possibility that the water filter for the ice maker is clogged. Fix: Locate and replace the water filter. Filters for ice makers are typically located inside the refrigerator (to keep them from freezing).
How do you troubleshoot an ice maker?
- Check the shutoff arm.
- Check the supply valve.
- Inspect the water supply line.
- Test the shutoff switch.
- Check the freezer temperature.
- Inspect the ejector gear.
- Test the ejector motor.
- Test the ice mold heater.
Can water filter cause ice maker not to work?
While a clogged water filter could be the cause of your ice maker not working, there are more common causes. ... If there is ice blocking it, then the ice maker will get the message it should not be producing more ice. Check the water supply to make sure it is going from the fridge to your freezer.
How do I force my ice maker to cycle?
- Open the freezer door to remove the ice bin from below the ice maker.
- Empty the ice from the bin. ...
- Press the ice maker toggle switch to the “On” setting if it is not already activated.
- Pop off the front cover of the ice maker with the tip of a flat-blade screwdriver.
How do I know if my ice maker is working?
- If the icemaker mold is empty, you can manually pour about 4 ounces of water in the icemaker mold.
- Wait about 2 hours.
- If the icemaker has dropped ice cubes out from the mold, you know the icemaker itself is working.
Some Frigidaire refrigerators have an an on/off button for the icemaker located on the front control panel . To reset the icemaker press this switch until the LED turns red, wait a few minutes, then press and hold it until the LED turns green.
How do I unclog my ice maker?
Apply heat with a hairdryer to the ice maker fill tube, which is usually a white, rubber-like hose. Hold the nozzle of the hairdryer at the front of the ice maker so that the heat will blast into the fill line. Set the hairdryer to its lowest heat setting to avoid melting the plastic lines and parts of the ice maker.
- At the bottom of the ice maker.
- Above the ice tray.
- Underneath the ice tray.
Why is my ice maker not working whirlpool?
In other instances, your a Whirlpool ice maker not making ice may be due to insufficient water supply . A clogged water filter, kinked water line hose, or defective water inlet valve can restrict the water flowing to an ice maker. ... Schedule a professional repair to replace a defective water inlet valve.
How do I know if my water filter is clogged?
- 1) Dispensed Water Tastes Bad. ...
- 2 Ice has an Odd Smell. ...
- 3) Slow Trickle of Dispensed Water. ...
- 4) Ice is Coming Out Small. ...
- 5) Black Specks in Water or Ice. ...
- 6) Water Filter Light Turns On. ...
- 7) Murky Appearance of Water or Ice. ...
- 8) It’s Been More than a Year.
Can a refrigerator water filter get clogged?
Even if you have nice soft water, the filter may become clogged over time with the very elements it is filtering out of your water . If you notice that it’s taking longer and longer to fill your glass, it might be time to replace your water filter.
How do I know when to replace my water filter?
- Odor. ...
- Floaty bits or black mold. ...
- Slippery water. ...
- Metallic taste or scale build up. ...
- Slow filtering speed. ...
- High number of gallons used. ...
- High TDS in your filtered water. ...
- Low water pressure.
How do I force my Whirlpool ice maker to cycle?
Look at the center of the Whirlpool icemaker to find the rotating arm that pushes the ice cubes out . Grab the plastic teeth on the arm, and gently pull them in a clockwise direction. You will hear a slight winding sound. The icemaker should start into its cycle.
