With the release of the 318, John Deere placed a
significant emphasis on ease of use and operator comfort
, as anyone who has ever used an earlier 300 series tractor will certainly attest to. The 318 was an enormous sales success, outselling other models.
How do you engage rear PTO on a John Deere tractor?
PTO can be engaged or disengaged without operating clutch.
Push down and forward on PTO switch (A or B)
to engage PTO clutch. Pull back PTO switch (A or B) to disengage clutch.
Does a John Deere 318 have a rear PTO?
What kind of PTO does JD 318 have? The
front and rear PTOs are both independent with electric clutches
. … The front PTO speed without any load is 3450 rpm, while the rear PTO speed without any load is 2000 rpm.
Where is the PTO on a John Deere tractor?
The PTO is the mechanism that turns on the blades
located under the mower deck
.
How many hours does a John Deere 318 last?
Depends on maintenance, but they can go well
over 2000 hours
. Mine had awful maintenance early in its life, and was still running strong at 1250, but had an issue with the governor, so I replaced it with a new P220.
What replaced John Deere 318?
X730
is the “direct” replacement to the 318.
What is the difference between a John Deere 317 and 318?
The
317 was a great runner
, just as strong as the 318. The 318 is heavier, has the 3 point hitch and power steering. Also has an auxillary fuel tank.
Where is the PTO switch located?
The PTO is the mechanism that turns on the blades
located under the mower deck
. The PTO works off of a 12-volt system. The electric clutch is operated by a switch located on the dashboard of the lawn mower.
How do you engage PTO on a tractor?
Lift the hydrostatic lever–located below the steering wheel–to set the cruise control. Depress the clutch with your foot.
Push forward on the lever below the console
, on the left, to shift the power-take-off (PTO) into gear. Release the clutch to engage the PTO.
How do I know if my PTO clutch is bad?
What does a bad PTO clutch look like? “Normally” when a clutch is going bad
it will start to show when you engage the PTO
. A common symptom would be for the clutch to be slow to engage if it's been running for a while and is hot. Once engaged they usually stay engaged until you shut them off.
Is the John Deere 318 a good tractor?
If you are looking for an
incredibly sturdy and reliable lawn and garden tractor
, the John Deere 318 is a great choice. The only downfall of this hard-working tractor is finding and paying for replacement parts. Keep in mind that replacement parts for many tractors are expensive despite the brand or model.
What engine is in a John Deere 318?
Model John Deere 318 | Engine 18HP Onan 781cc 2-cyl gasoline | Transmission Hydrostatic | Clutch Electric | Fuel Capacity 17.0 liters (4.5 US gal.; 3.7 Imp. gal) |
---|
What motor is in a John Deere 318?
Model John Deere 318 | Engine 18HP Onan 781cc 2-cyl gasoline | Transmission Hydrostatic | Clutch Electric | Fuel Capacity 17.0 liters (4.5 US gal.; 3.7 Imp. gal) |
---|
How old is a John Deere 318?
Click here to see our latest offering. If you ask a group of John Deere enthusiasts what their favorite lawn and garden tractor model is, the 318 is likely to rank at the top of the list.
Manufactured from 1983-1992
, this perennial favorite has become a bonafide American classic.
What engine is in a John Deere 317?
Engine Detail | Kolher KT17QS | Displacement 691 cc 42.18 ci | Bore/Stroke 3.125×2.750 inches 79 x 70 mm | Power 17 hp 12.7 kW |
---|
What year is a John Deere 317?
The John Deere 317 tractor represents the “deluxe” series of 300 class hydrostatic tractors
manufactured from 1979 to 1983-84
. John Deere decided to add several new design additions, including moving much of the steering equipment to the left side of the chassis.