If you’re getting no sound out of your Bluetooth headphones,
make sure that the Media Audio setting is turned on
. With your Bluetooth headphones connected, go to Settings, and click Bluetooth. Select your Bluetooth headphones from the list. On the next screen, make sure that Media Audio is turned ON.
Why are my earbuds not making sound?
Check for
debris, damage, or loose connections
Check your headphone cable, connector, remote, and earbuds for damage, like wear or breakage. Look for debris on the meshes in each earbud. To remove debris, gently brush all openings with a small, soft-bristled brush that’s clean and dry.
How do you fix earbuds that won’t make noise?
- Turn on the earbuds’ power source. Some earbuds have power sources. …
- Turn on the audio source or turn up the volume. …
- Clean the earbuds. …
- Unplug and reconnect wired earbuds. …
- Check the Bluetooth connection with wireless earbuds. …
- Connect the earbuds to another audio source.
Where is audio settings?
- Press menu, and then select Apps & More > Settings > Sound.
- Navigate to the setting you want to change, and press ok. The options for that setting appear.
- Scroll up and down the list to select the desired option, and then press ok to set it.
Why did my earphones suddenly stop working?
Sounds like the cable might be damaged
. Have you tried wiggling the wire near where the plug is in? If it is damaged, the sound should cut in and out in one or both sides of your headphones. If that is the cause, you will need to cut the cable about 2cm or so above the plug and resolder another plug onto it.
How do you pair left and right earbuds?
Take the left and right earbuds out the case and
long press the touch control area at the same time for
about 3 seconds or until you see a white LED light flashing on both earbuds. It is very important that you long press the left and right earbud at the same time.
What to do when earphones are not working properly?
- Turn on the headphones. …
- Turn the headphones off and on again. …
- Charge the headphones. …
- Check the USB power requirements. …
- Check USB compatibility. …
- Turn on Bluetooth on the headphones. …
- Turn up the volume. …
- Successfully pair the Bluetooth headphones with the device.
How do I change my audio settings?
- Open the Settings app.
- Choose Sound or Sound & Notification. …
- Adjust the sliders to set the volume for various noise sources. …
- Slide the gizmo to the left to make a sound quieter; slide to the right to make a sound louder.
Where is audio settings on Zoom?
You can access your audio settings and test your audio when you are already in a meeting.
In the meeting controls, click the arrow next to Mute/Unmute. Click Audio Options
.; this will open your audio settings.
Why my audio is not working?
You might have the sound muted or turned down low in the app.
Check the media volume
. If you still don’t hear anything, verify that the media volume isn’t turned down or off: Navigate to Settings.
How can I fix my earphones without tools?
- As you twist, bend, straighten, and adjust the cord, you might hear audio as the damaged wires touch. …
- When you find a position that allows you to hear sound, hold the cord in place with your fingers.
Why is only one side of my Bluetooth earbuds working?
Mono
basically plays the same audio in both ears
, but can sometimes cause this issue. The balance problem occurs when the balance scale may be turned all the way to the left or right. You can check for mono and balance settings in your device’s Accessibility settings. You’ll see a slider displaying left and right.
Why is only one of my true wireless earbuds working?
True Wireless Earbuds can
sometimes un-sync from one another
requiring a manual reset to enable them to auto sync to one another. … It’s simple to reset your earbuds to enable them to auto sync to each other again.
How do you pair both earbuds?
- Turn them both on at the same time, holding down the buttons until they flash red then blue.
- Once they both are flashing at the same time, you’ll double press a button on ONE earbud.
- The earbud will say it’s connected.
Why are my headphones not working when I plug them in?
Check to see if the smartphone is connected to a different device via Bluetooth. If your smartphone is paired with wireless headphones, a speaker, or any other device via Bluetooth, the
headphone jack may be disabled
. … If that’s the problem, turn it off, plug in your headphones, and see if that solves it.
Why is my left earphone not working?
1.
Test and Repair the Earphone Cable
. The first attempt you should make when your left earphone stops working is to test the cable. Your earphone’s tiny cable can be tested by inserting the earphone plug into your smartphone and make several bends with your fingers to detect a possible point of a cable break.