If you have a blown 44RE and plan on putting a new trans in I would
definitely recommend putting the 46RE in there instead
. It has better internals and a beefier torque converter. I found a few threads with people saying that the 46RE tq doesnt bolt up to the 5.2L and that is completely incorrect.
What is the difference between a 44RE and a 46RE?
Basically the only diff in the two is that
1st and 2nd gear are geared different
and the 46RE is a little more “beefed” up for heavier duty use… Personally, unless you plan on doing alot of towing or HD work with the 44RE should be fine. the 46 is simply a beefed up version of the 44.
What does a 46RE transmission fit?
Details about A518 46RE Dodge Stock Transmission Fits
1996-2002 Ram, Dakota, Durango
.
What does 44RE mean?
The A500, later renamed 40RH and 42RH (hydraulic controlled governor pressure) and 40RE, 42RE, 44RE (
electronic controlled governor pressure
, 1993-up), was an A904 derivative used in trucks and vans.
What is the difference between a 42RE and an 44RE transmission?
The difference is how much torque they can handle.
The 44 is a bit stronger than the 42
. They have the same gear ratios. The 46 RE has a larger housing and a different 1st and 2nd gear.
How do I know if I have a 44RE transmission?
The identification plate is attached to the right side of the transmission case. The 42RE/44RE/46RE is a 4-speed fully automatic transmission with electronic governor. The
ID numbers are stamped on the case’s left side just above the oil pan
.
How many gears does a 46RE transmission have?
A 46RE transmission has a total of
five gears
. They are 1, 2, 3, 4, and Reverse.
How many speeds is a 46RE?
The 46RE, 47RE and 48RE transmissions are all
four speed
fully automatic units with an electronic governor. They are equipped with a lock-up clutch in the torque converter. First through third gear ranges are provided by the clutches, bands, low-roller clutch, and planetary gearsets in the transmission.
What vehicles have the 42re transmission?
- 1989-2003 Dodge Dakota.
- 1998-2000 Dodge Durango.
- 1989-2001 Dodge Ram pickup 150 / 1500.
- 1989-2003 Dodge Ram Van B150 / B250.
- 1993-2004 Jeep Grand Cherokee.
- 1996-1998 Jeep Grand Cherokee 5.2 V8.
Are all 46RE transmissions the same?
All 46Re’s are not the same
. Basically, the short form is that ’96-99 Dakota and Durango interchange.
Is a 727 transmission good?
When speaking of automatic transmissions, the Chrysler A-727 or TorqueFlite 8 units are not only easy to find because of their many years of use, but they are also
very strong
and can be used in many performance and non-Chrysler applications, as well.
What is the difference between a 727 and 904 transmission?
Re: What is the difference between the 727 and the 904 transmission? The 727 was the only available automatic transmission for big block cars. You could get a 727 for a small block, which where mostly for 340’s and 360’s or you could get a 904 which was primarily for the
318
.
How can you tell 42RE?
Look for the transmission part/identification number and date code. According to the 42RE service manual on Scribd.com, the codes are
located on the driver’s side of the transmission
, stamped just above the oil pan gasket surface. The first group is the assembly part number, followed by the manufacturing date.
How does a 42RE transmission work?
Here’s how this system operates: As
the output shaft begins to move
, a 2-wire AC generator (transmission output speed sensor) begins to signal the TCM of the rpm. As the shaft speed increases, the TCM controls the governor pressure solenoid accordingly by a pulse-width modulated signal.
Who made the 46RE transmission?
A518 46RE Transmission Sale. Introducing our 46RE transmission sale. This A518 class transmission is most commonly known as the 46RE. Since it’s conception in the late 80’s, this
Chrysler
built 4 speed automatic has been a reliable workhorse in Dodge vans, pickups and Jeep Cherokees for over a decade.
