As for the wheel actually fitting,
you need to check the hub spacing
— for example, 5 speed rear wheels for road bikes normally use 120 mm spacing while 6 speed use 126 mm spacing. Measure your frame’s spacing and buy accordingly.
Can you use a 6 speed derailleur on a 5 speed bike?
If I’m not mistaken, you’re talking about non-indexed derailers, plus the chain width would be the same for 5 and 6/7, so
there should be no problem
.
Are freewheels interchangeable?
Sprocket Replacement and Restoration.
Most multi-speed freewheels have replaceable, interchangeable sprockets
.
Can a 6 speed derailleur?
Shimano derailleurs marketed as 7, 8, 9 speed (and in addition, 10 speed road), can be interchanged in any of those speed drivetrains. Six speed is included in there as well, it’s just not common to see. So
yes, a six speed rear derailleur will work correctly with 7, 8 or 9 rear speed systems
.
Are 6 and 7 speed cassettes interchangeable?
6 and 7 speed have different spacing, 8 is slightly different to 7 as well. If the bike is from post 1989 or so it will have a block not a cassette, and a cassette won’t go on the hub.
If it’s a 6 speed cassette it may have a threaded top cog meaning a modern 7 speed cassette won’t fit either
.
What is a 6 speed bike?
Is Microshift compatible with Shimano?
Microshift has made all Centos components fully compatible with Shimano
, so the cable pull ratios for gear and brake are identical. A meta-analysis of online comments from Microshift customers shows a lot of successful mix-and-matching going on across 11-speed Shimano groupsets of varying ages.
Can I use Shimano derailleur with SRAM cassette?
Buyers are free to use a SRAM chain and cassette with their Shimano groupset, and vice versa, just as a SRAM chain can be paired with a Shimano cassette, and vice versa.
SRAM’s cassettes and chains are compatible with all of Shimano’s groupsets, and vice versa
.
Can I use any derailleur for my bike?
A derailleur for your mountain bike should match the specifications on the original derailleur
. That is, while it doesn’t need to be the same model of derailleur, it does need to be the same brand, in almost every case. It also needs to match the number of gears, or have more intended.
Are bike cassettes interchangeable?
In some cases, it is possible to run a cassette from a different brand than the rest of your drivetrain.
SRAM and Shimano cassettes, on either road or mountain bike, are interchangeable with each other as the spacing is the same between the sprockets
.
Are Shimano freewheels interchangeable?
Most Shimano Freehub bodies are interchangeable
.
Are 7 and 8 speed freewheels interchangeable?
7-speed cassettes fit fine on 8- and 9-speed (and most 10-speed) hubs if you put a 4.5 mm spacer onto the body before the cassette
.
Can you use a 7 speed derailleur on a 6 speed?
You would need to either add a 7 speed cassette or use 7 speed spacers on the current 6 speed cassette. Are you sure it’s a cassette? Many 6 speeds are freewheel.
The derailleur should work fine
.
Can 7 speed derailleur work on 6 speed?
6 speed shifters will work well with 7 speed sprockets
, but they will not shift onto one of the outer sprockets because they don’t have enough “clicks” (5 in stead of 6 needed for a 7 speed cassette).
Are derailleurs interchangeable?
Shimano derailleur compatibility
Most 8- and 9-speed Shimano mountain bike and road kit is inter-compatible
because they both use the same cable pull ratio. This means that you can use an 8 -or 9-speed mountain bike derailleur with road shifters or vice versa.
How do I know if my cassette is compatible?
A good way to check compatibility is to
see how many teeth your Sram cassette has
. If the smallest cog is 10T, it should use an XD-style freehub, but if it’s 11T then it likely uses a Shimano HG freehub. Campagnolo freehubs are compatible only with Campagnolo cassettes.
What is a 5 speed bike?
What is a 5-Speed Conversion? A 5-speed conversion refers to
transforming a vintage 10-speed bicycle into a 5-speed by removing one of the two front chainrings and the front derailleur system
(see before and after pictures above).
Are all bike cassettes the same size?
Cassettes come in a wide range of sizes to suit all disciplines
. The size of a cassette is usually expressed by quoting its smallest and largest cogs. As an example, a typical modern road bike cassette may be an 11-32t (teeth) cassette. For a mountain bike cassette, the range may be something like 10-52t.
What gear should I bike in on flat road?
For riding on flat roads, it is recommended to use the
middle gear
. It is a common choice among bikers as it helps you reduce pressure from your feet onto the pedals.
What gear should I use on a flat road?
Middle Gear
This is a great gear for everyday terrain when you’re cruising along on a flat road or on undulating terrain. You want some resistance, but not too much. If the road goes up and down a bit, you’ll probably flick between the rear gears to cater for changes.
How many speeds do I need on my bike?
In terms of how the number of gears affects the overall ride of the bike, a 21-speed is generally faster with smoother transitions and pedaling. The
7-speed is adequate for most riders
, which is why many people choose the slower option.
Is Microshift better than Shimano?
If you are in the market for entry-level drivetrains for a Hybrid Bicycle or MTB which are equivalent to Shimano Tourney, then the microSHIFT Mezzo groupset is a perfect match. The derailleurs and shifters work efficiently and
microSHIFT ensures improved durability and reduced maintenance
.
Is Microshift advent compatible with Shimano cassette?
It’s available in both a clutch and non-clutch version, and the clutch option uses a ratchet-and-pawl design that is fully serviceable and adjustable. Like the entire Advent line,
the rear derailleur is not compatible with Shimano or SRAM
, and only works with MicroSHIFT’s 9-speed shifters.
Where are Microshift made?
The result is product with great feel and function that performs in real world conditions. With an array of specialized machinery and facilities in
Taiwan and China
, our drivetrain manufacturing team never stops investing in new ways to make our products better or our quality control more consistent.
Are Shimano and SRAM chains interchangeable?
Shimano and SRAM 11-speed chains are cross-compatible
. If you have a Shimano 11-speed drivetrain, a SRAM chain will work fine and vice versa, however manufacturer’s recommend pairing your components for optimal performance.
Can I use a MTB cassette on a road bike?
It is possible to use a mountain bike cassette with an even lower range on a road bike, but you’ll have to switch to a mountain bike rear derailer
. Most mountain bike rear derailers have a long cage, which can handle a 34-tooth cog, or even some newer cassettes with 36-tooth cogs.
Can you mix Shimano groupsets?
It is possible to mix and match as long as you get components from the same generation
. For example: 9000 Dura Ace, 6800 Ultegra, and 5800 105 are all cross compatible. Each have 11-speeds in the rear, use the same cable pull per shift and use the same front derailleur design.
