fit yes work no
. The 94 uses an OBD-1 computer, and the 95 uses an OBD-2 computer system. The 4L60E out of the Silverado should work, especially since its a 4×4 and its around the same model year.
Can I use any 4L60E?
Both 2wd and 4wd versions of the 4L60-E can be used equally well
, and there are no inherent advantages to either one once you have installed our adapter assembly. The HydraMatic can be adapted to the popular Jeep (and some IH) transfer cases, including the: Dana 18 (truck or longer wheelbase applications only)
Will a 99 4L60E fit a 96?
non pwm trans will not work in any 96
and newer trucks. the torque converter will slip the clutch and the valvebodies are different. just changing the internal wiring will not work.
What engine will a 4L60E transmission fit?
Also, as an aftermarket part, the 4L60E transmission is a popular automatic transmission for Generation III LS motors like the LS1. Generally speaking, a 700R4/4L60E will fit most vehicles initially offered with
a TH350 or TH400 transmission
.
Will a 99 4L60E fit a 97?
The
99 will fit and work
, and so will the 93, but there may be a difference in the 4 wheel drive trans, because of the transfer case and the way it bolts up.
Can I rebuild my own 4L60E?
New adaptations are being developed all the time, engineered to make your 700-R4, 4L60, 4L60E, 4L65E, and 4L75E boxes better. Unless you are a seasoned transmission builder with a lot of experience with the 4L60E series transmissions,
it is suggested you never execute transmission rebuilding yourself.
Can you swap a 700R4 with a 4L60E?
No 700R4 transmissions were ever controlled by the ecm. The lockup function is grounded with the ecm, but not the shift points like the 4L60E that replaced it.
Any 700R4 will work in any application
.
What years will a 4L60E transmission fit?
| Year Ranges Transmission Pan/Filter | 1994-1996 4L60E Shallow | 1997 4L60E Shallow – Early Deep – Late | 1998-2000 4L60E Deep | 2001-2003 4L60E/4L65E Deep |
|---|
What transmissions bolt up to a Chevy 350?
Re: Transmissions that will bolt up to a 350 The
NP208 or 241 transfer cases
bolt up directly.
How much horsepower can a 4L60E transmission handle?
So, to keep things cooler they run a deep pan with a filter extension. The heavy-gauge cast-aluminum pan allows for an additional two quarts of transmission fluid, which enhances cooling under extreme conditions. 22. See, that’s all it takes to build a 4L60E trans that’s rated to handle
over 1,000 horsepower
.
How can I tell if my 4L60E transmission is bad?
- No Third Gear – You put the vehicle in drive, start off the transmission, and shift to second gear. …
- No Second Gear/Reverse – The second most common symptom of a failing 4L60E transmission is your inability to shift to second gear and go reverse.
Will a v6 4L60E work with a v8?
The 4L60E in the NNBS
is identical except the harness
in 2009-2013. 2007.5-2008 are the exact same regardless if is v6 or v8. The converter or flexplate may be different tho.
How many splines does a 4L60E have?
The 4L60E is an electronically controlled version of the 4L60 that retains the
27-spline
output shaft and has a 30-percent overdrive.
What is the difference in 4L60E transmissions?
The 4L60E (and similar
4L65E
) is a series of automatic transmissions from General Motors. … The two transmissions cannot be differentiated from the outside. The 4L65E shares the same exterior parts but have stronger internals such as 5 pinion planets compared to 4 in the 4L60E.
How bad is the 4L60E?
For many, the 4L60E transmission is a good transmission, but for others, it appears as if it is the worst transmission ever made. One GM owner stated: “My opinion is that the
4L60E is not the worst transmission ever made
. … If used, then one has no idea exactly what the transmission went through before you bought it.”
