What Kind Of Transmission Is In A 2001 GMC Sonoma?

What transmission does a 2002 GMC Sonoma have?

A

five-speed-manual transmission

is standard, and a four-speed automatic is optional. However, the Crew Cab model comes with the automatic only.

What kind of transmission do I have?

Open the driver’s side door and find the white card on the side of the door that is filled with small black lettering. This card contains specific details about the year the car was made, its transmission, engine specifications and other details. Underneath or beside the “TR” symbol will be a number code.

How do I identify a GM manual transmission?

While there are no distinctive pans and bolt counts to make transmission identification simple, 4-speed manual transmissions can be generally

identified by examining the side profile

. The shape of the main housing will give a reasonably reliable indication of the transmission group to which your gearbox belongs.

Are all T5 transmissions the same?

While there are numerous configurations of the T5, because of the large quantities of T5’s produced,

many parts are interchangeable

. There are now over 200 different T5 transmission assembly part numbers and almost as many ways to customize them to fit just about anything whether passenger car or light duty truck.

What transmission is in a 85 S10?

Drivetrain. The 1985 Chevy S10 pickup had a

standard four-speed manual transmission

, with the option of a three-speed automatic transmission. A five-speed manual transmission was available with the four-cylinder engines.

What kind of transmission is in a 2000 Chevy S10?

REBUILT Transmission 4L60-E 4-Speed

GMC Yukon Chevy Silverado Trucks K1500 4×4 (Fits: 2000 Chevrolet S10)

What does a T5 transmission come in?

There are two basic types of T5 transmissions—the original T-5 STD (Non-World Class or NWC) and

the World Class T5 (WC)

.

What kind of oil does a 1997 GMC Sonoma take?

What kind of transmission is in a 2001 GMC Jimmy?

All models come with a 190-horsepower 4.3-liter V-6 engine, but there is a choice of transmissions and either two- or four-wheel drive. A

five-speed manual transmission

is standard on two-door Jimmys. A four-speed automatic is standard on the four-door and optional on the two-door.

What transmission Do I have GMC?

The simplest way to find your transmission type is to

look in your owner’s manual

. Your manual should have the name and type of transmission, along with service information. If you’ve misplaced your owner’s manual, most trucks have a white label printed on the inside of the driver’s door.

What transmission do I have by Vin?

Another way is to crawl under the vehicle and

look for part numbers

. Using a good flashlight, look for part numbers stamped into the transmission pan or the transmission itself. Your local auto part store or dealer will be able to cross-reference the numbers to determine the kind of transmission the part belongs to.

What kind of transmission is in a 2000 GMC Jimmy?

The 2000 GMC Jimmy came factory standard with

A4 speed 4L60-E transmission

on all models. This transmission required an initial fill of 4.7 liters but the full capacity will by 10.6 liters. It is recommended to use ATF Dexron VI fluid in this vehicle.

What is the difference between a 4L60 and a 4L60E transmission?

The rear output housing is configured with a six-bolt pattern in late model 4L60E transmissions. The 4L60 transmission is configured with a

four-bolt pattern

. The bolt pattern is not a guaranteed distinction, however, as early 4L60E transmissions, manufactured from 1992 through 1997, also have a four-bolt pattern.

How do I know if I have a 4L60E or 4L65E?

The two transmissions cannot be differentiated from the outside. The

4L65E shares

the same exterior parts but have stronger internals such as 5 pinion planets compared to 4 in the 4L60E. 4L60E uses a 6.5′′ depth bell with 6 bolts for non gen 3 LS applications and a 7′′ depth bell with 7 bolts for LS applications.

How do I know if I have a T10 transmission?

According to Drivetrain.com, the “T10” designation and the code, “13-04,” is sometimes cast on the transmission housing.

Count the cross-grooves on the input shaft

. … Since there are many gear-ratio variations of the T10, there are identifying grooves cut across the clutch spine of the input shaft.

How do I identify my T5 transmission?

The Borg Warner T-5 is generally identified by

a 1352-xxx number stamped on a metal tag on a tail housing bolt

. This tag is normally under the second bolt from the top on the left side of the transmission. While Ford used aluminum for these tags, GM used steel which is prone to rusting.

Will a T5 transmission fit a 289?

Hi Dave, Your T-5

& bellhousing will fit right onto your 67 289

. You’ll need a 28oz 157 tooth flywheel. I have everything you’ll need in stock, even in aluminum.