Check for cars and reduce your
speed to 25 mph
before entering the traffic lane. Check for cars, increase your speed to match the flow of traffic, and merge when the way is clear.
When entering an expressway when should you speed up to match the speed of the traffic on the expressway?
When entering the freeway using the acceleration lane or on-ramp, you’ll want to accelerate to the speed of traffic on the freeway. Use the length of the acceleration lane to get up to speed, put your turn signal on to indicate that you are merging, wait for a large enough gap in traffic, and merge when safe to do so.
When entering a freeway you should speed up?
You have to be careful when entering the freeway. You should
search ahead for traffic on the ramp
as well as for a gap in traffic on the freeway. Using the acceleration lane, look for an opening in traffic, signal and accelerate to or near the traffic speed, yield to traffic already on freeway.
When entering an expressway in the acceleration lane you should quizlet?
slow or stop before entering the acceleration lane or expressway.
should plan for fuel, food, and rest
. a minimum of three seconds. the lane will be closed farther ahead.
When you enter an expressway from the left you should?
How should you select a gap in expressway traffic on the left?
Glance in the left outside mirror and over your left shoulder
. use only lanes open for traffic.
How do you properly enter an expressway?
What is the proper way to enter an expressway from the entrance ramp?
Go down the ramp and cross over to your desired traffic lane as soon as possible
. Use the acceleration lane to blend into traffic. Go down to the bottom of the ramp and come to a complete stop before entering the expressway.
How should you exit the expressway?
Wait until you are in the deceleration lane. Then slow gradually until your speed matches the posted exit ramp speed. If you miss the exit ramp, never turn around or back up. Go to the next exit; get back on the
freeway
in the opposite direction and return to the exit you want.
Which of the following should you do when entering the freeway?
- Look for the freeway entrance sign. …
- Make sure that you are not entering the freeway exit ramp. …
- Follow the freeway entrance’s speed limit. …
- Follow the freeway entrance’s ramp meters signal lights. …
- Accelerate to a safe speed close to the flow of freeway traffic. …
- Merge into the freeway lane.
When entering the expressway when should you turn on your turn signal?
You should signal
at least 100 feet before you turn
so the other drivers can be ready. Check your vehicle’s turn signals often to ensure they are working properly.
When entering an expressway never stop in the acceleration lane unless traffic is?
When entering an expressway, never stop in the acceleration lane unless traffic is:
Too heavy for you to merge safely
.
When should you slow to the advisory speed posted for a curve?
When should you slow to the advisory speed posted for a curve?
speed on the approach is too great
.
When should the following distance be increased for expressway driving?
Increase following distance when following large trucks or buses, motorcycles, driving in bad weather, being tailgated, driving a heavy load or pulling a trailer and entering/ exiting the expressway.
When changing lanes, change one lane at a time
. Do not cross several lanes at once.
What four steps should you follow when exiting an expressway?
What steps should you take when exiting an expressway? *
At least 1/2 mile from exit signal and make lane change to position 3
when safe to do so. *Flash brake lights to warn drivers behind you. Keep a safe distance, monitor you front and rear zones.
When should you leave an expressway?
When exiting an expressway, you should:
Cut off other traffic
. Avoid using your turn signal. Explanation When exiting an expressway, it is important to be alert to other traffic moving nearby. Be sure to look at the new posted speed limit and check your speedometer.
What three actions should be automatic when changing lanes to pass on an expressway?
Describe three actions that should be automatic when changing lanes on the expressway.
Change lanes one lane at a time. Signal for every lane change. Check traffic in the outside and inside rearview mirrors.
When entering a freeway you should not answer?
Explanation If you want to enter the freeway but do not see a space for your vehicle in traffic,
slow down on the ramp to wait for a gap
. Do not drive to the end of the ramp and wait for a gap or you will not have enough room to accelerate to the speed of traffic before entering the roadway.
What is the first step you should follow when passing on the freeway?
Signal your intention and accelerate into passing lane
; Accelerate quickly to an appropriate speed; Concentrate on the path ahead; Check the mirror for following cars.
What are the three parts of the entrance to an expressway?
Freeway entrances usually have three basic parts:
an entrance ramp, an acceleration lane, and a merging area
.
What should you do when your car starts to hydroplane?
Turning the steering wheel, using your brakes, or trying to speed up after your vehicle is already hydroplaning can cause you to lose control. The best thing to do if your vehicle begins to hydroplane is
to release the gas pedal
so you start to slow down until your tires regain traction with the road.
What are the three main components of entering an expressway?
Expressway entrances include three areas: the entrance ramp, the acceleration lane, and the merge area. The entrance ramp allows the driver time to search traffic for flow and traffic gaps and evaluate speed and space requirements before entering
.
Where should you begin to slow down when exiting an expressway?
Answer: When exiting the freeway,
the off-ramps
provide more than adequate space for a driver to slow down to surface street speeds. A driver should signal his intention to exit the freeway (at least 100 feet before the movement), move onto the exit ramp and then begin to slow for the transition to slower speeds.
When you encounter large trucks on the expressway you should?
When you encounter large trucks on the expressway, you should
avoid driving between two trucks
. In order to avoid conflicts when traffic is heavy in the right lane, use the center or left lane. A minimum speed limit is intended to keep traffic from moving to slowly.
When the expressway is wet or slippery your following distance should be?
When speeds are increased, or during adverse driving conditions, increase your following distance
up to 6 seconds or more
if necessary. Wet pavement requires more stopping time and space. To make a smooth stop, increase pressure on the brake pedal gradually and just before you stop, reduce the pressure.
What is the basic speed rule?
California has a “Basic Speed Law” that states “
No person shall drive a vehicle upon a highway at a speed greater than is reasonable or prudent having due regard
for weather, visibility, the traffic on, and the surface and width of, the highway, and in no event at a speed which endangers the safety of persons or …
When should the following distance be increased from 3 seconds for expressway driving?
The three-second rule is recommended for passenger vehicles during ideal road and weather conditions. Slow down and increase your following distance even more during adverse weather conditions or when visibility is reduced. Also increase your following distance if you are
driving a larger vehicle or towing a trailer
.
