How Much Are Fox Shocks?

by | Last updated on January 24, 2024

, , , ,

Read “Why You Need Shocks“

FOX Jeep shocks are made of aluminum because 6061 aluminum’s thermal conductivity value is over four times that of low carbon steel. This means that

aluminum FOX shocks are able to cool much better than painted steel shocks

, and they are extremely resistant to rust.

How much does it cost to have Fox shocks rebuilt?

REBUILD REVALVE OEM Raptor

Front w/Coil


$125


$35
2.5 Bypass 2.5 Internal Bypass 3.0 Bypass XP 1000 Front $150 $35 3.0 Internal Bypass 3.5 Bypass XP 1000 Rear $250 $35 4.0 Bypass $300 $35

How many miles do Fox shocks last?

What Fox, King, Icon, and every other high performance shock manufacturer doesn’t put in their marketing language is that their race-level shocks are typically only good for

30-50k miles

, depending on how much offroad and aggressive terrain the shocks see.

What do FOX shocks do?

Dampers absorb and dissipate energy. When springs and dampers work together, you’re given control of your vehicle. At their core, shocks

convert the motion of the vehicle to heat inside the shock

. Then the shocks dissipate that heat into the atmosphere.

Do FOX shocks have lifetime warranty?

Warranty Policy.

The factory warranty period for your fork/shock is one year (two years for countries in the EU) from the original date of purchase of the bicycle or fork/shock

. A copy of the original purchase receipt must accompany any fork/shock being considered for warranty service.

Do Fox shocks lift your truck?

Fox Shocks’ Buyers Guide. Fox Racing has a lot of different shock options for your vehicle, nearly all series have OEM factory replacement options if your truck is stock height without a lift kit.

The same series are also available for your lifted truck, SUV, or Jeep

.

Are Fox shocks Made in USA?


Fox are made in the USA

and are built to the highest technical specifications. They are derived from the technology Fox have developed over 30/40 years of off road racing.

How much of a difference do Fox shocks make?

The aluminum body of the Fox 2.0 shocks provide a couple different benefits;

lighter overall weight, and more importantly, better heat dissipation

. The longer a shock can remain cool, or shed heat, the better performance it provides due to less cavitation of shock fluid inside the shock.

How often should FOX shocks be serviced?

Fox recommends that the minimum suspension fork and shock service is

125 hours of use, yearly, or whichever comes first

. That is certainly on the longer side of things. Similar to changing the oil in your car, the more frequently you service your suspension, the better the fork will perform for longer.

How often do FOX shocks need rebuilt?

A complete shock rebuild is recommended

every 1,000 miles

for off-road race applications. Split street/off-road–use vehicles every 10,000 miles, and street every 50,000 miles. A FOX complete shock rebuild service includes new seal kit, new proprietary JM92 Suspension Fluid, deburr and polishing of shock shafts.

How do you service a FOX rear shock?

Should I replace all 4 shocks at the same time?


Shocks and struts should always be replaced in pairs or, better yet, all four, for even, predictable handling and control

. After all, all four have been on the vehicle for the same number of miles and worked under the same conditions.

What’s better fox or King shocks?


Fox oil offers substantially better lubrication across a wide range of temperatures

based on the manufacturer ratings. Viscosity index (VI) is a measure of how much the damping will fade due to heat. Fox’s VI of 370 is very high and provides exceptional performance. King’s VI of 150 is an average rating.

Is Bilstein better than Fox?

Bilstein 5100 has lifted vehicle support too, and they function well right until you get to the 4” mark. Above that,

Fox is the king

. 2.0 shocks will provide firmer control and better damping on higher lifted trucks. The fit is also snugglier if you decide to go big with 4.5” or 5”+ lifts on your offroad monster.

Do Fox 2.0 shocks lift your truck?

Can you adjust Fox shocks?


The optional rebound adjust feature on FOX 2.0 coil-over shocks gives the ability to externally adjust the shock rebound damping

. Adjustments are made using a small flat- bladed screwdriver on the eyelet at the end of the shock shaft. For slower rebound, turn the screw clockwise.

Are Fox shocks good for towing?

The Fox Performance Series 2.0 IFP is constructed with a monotube design and an internal floating piston. The result is

a solid performance and reliable damping in the harshest driving conditions, specifically when towing or off-roading

.

Can you add reservoir to Fox shocks?

Fox 2.0 Remote Reservoir Performance Advantage


Adding Remote Reservoirs to Fox 2.0 Performance Series Shocks improves their ride quality, long term durability and heat capacity

. Remote reservoirs reduce the operating gas pressure, friction and heat inside the shock by allowing more volume for the nitrogen to expand.

Can shocks be rebuilt?


Not every shock absorber problems can be repaired

. Parts that you can replace individually include mounts, shock absorber bushings, seals, piston, and compression oil. As a rule of thumb, you should only consider shock absorber repair if the existing shocks have not done more than 35 000 miles or slightly more.

How much does it cost to rebuild King shocks?

King Shock Rebuild Request

Average cost is around

$600-$700/set

of shocks assuming no substantial parts are needed (reservoir assembly, shafts, etc.). It’s not uncommon to need rear shafts on shocks that have been neglected but 90% of our rebuilds are seals, oil and a couple bearings.

Are FOX shocks better than rough country?

Do shocks affect towing?


Adjustable shocks can certainly help with towing

, since you can typically adjust compression valving within the shock by the turn of a knob. Shocks such as the Rancho RS9000XL, or Fox 2.0 CD, can be adjusted to behave on the firmer range of valving when under load or towing to give the best handling.

Where are FOX shocks manufactured?

FOX products are designed, tested and manufactured in

Santa Cruz County, California

by the best people in the industry.

Does Fox Racing own FOX shocks?

Trade name Fox Racing Products Off-road suspension, Motocross gear, Clothing, Footwear, Eyewear, Bags, Stickers, apparel, Helmet, Fox womens

Who makes FOX suspension?

under Geoff Fox, and Bob Fox’s Fox Racing Shox parts production company,

Fox Factory

. A holding company, Fox Factory Holding, was established in 1978. Fox Factory produces suspension components for motorcycles, automobiles, all-terrain vehicles, snowmobiles, and mountain bikes.

Where are rockshox made?

SRAM took over the company and its debt obligations for $5.6 million. The company had 300 employees in Colorado Springs. In 2002, production in Colorado moved to

Taichung, Taiwan

. A small test facility remains in Colorado Springs.

David Evans
Author
David Evans
David is a seasoned automotive enthusiast. He is a graduate of Mechanical Engineering and has a passion for all things related to cars and vehicles. With his extensive knowledge of cars and other vehicles, David is an authority in the industry.