How Much Boost Can A Stock LFX Handle? - Fixanswer

With stock internals you can measure the life of your engine in seconds if you go

over 10 lbs. of boost

. If you don’t have the resources to keep putting motors in then stick to 5 lbs, especially if it is your daily driver.

Is the LFX a good engine?

The 2012 LFX models are

going to be less reliable than 2013+ models

as it suffered from the old timing chain issues. However, this problem is really only a problem if you let your oil levels run too low.

How much boost can a 3.6 Camaro handle?

Your V6 can certainly handle a few psi of boost, and the 300-horsepower V6 used in 2010 and newer Camaros can safely put

about 425 horsepower

on the wheels with a good twin turbo setup. However, older models may need a bit of internal work to withstand huge hits of boost.

How much boost can a stock Mazdaspeed 3 handle?

With stock parts, the limit seems to be

22 psi

. If you get upgraded cams, vavles, stroker kit, etc, you can probably get in the 29-33 psi range (and getting tons of horsepower).

How much boost can a stock 3.0 v6 handle?

Depending on your engine and tune, you can make around

450-500hp

on stock internals; this is the high end. More than likely, you will end up in the 350-400 range.

How much horsepower does a 3.6 liter engine have?

The 3.6 liter Pentastar engine is rated at

305 horsepower and 270 lb. -ft

. of torque in the Dodge Challenger; 90% of torque is available from 1,800 to 6,350 rpm, real-world punch.

Is the GM 3.6 a good engine?

The 3.6L LLT delivers a market-leading balance of

good

specific output, high torque over a broad rpm band, fuel economy, low emissions, and first-rate noise, vibration and harshness control, with exclusive durability-enhancing features and very low maintenance.

Is 3.6 liter engine good?

So it is fair to say the 3.6

V6 Pentastar is a good reliable engine

. … It is regarded as among the most reliable high volume production engines around. These engines are so good they have been incorporated into the RAMS, Chargers, Wranglers, minivans, 200’s, 300’s, GC, Challenger and more. It is a great engine.

How much boost can a stock 3800 handle?

The n/a motors are proven to easily handle

6-7psi

of supercharged boost without any problems, while the stock L67’s cant handle much more than 10, so it works out right when comparing to a turbo setup.

Is a 350z faster than a V6 Camaro?

V6 Camaro. The 07-08, 350z can definitely pull 13s in the 1/4 mile. It has a pretty

significant performance advantage over

a V6 Camaro.

How can I make my V6 Camaro faster?

Cold Air Inductions: Get More Air and feel the gains! …
Programmers/Tuners: Handheld, Plug-And-Play Tuning Options for your Camaro! …
Long Tube & Shorty Headers: …
Camshafts & Valvetrain: …
Nitrous Oxide: …
Superchargers & Supercharger Upgrades:

How much boost can a stock Mazda 2.0 handle?

– The stock 2.0 Motor *can* handle

10psi

(due to shorter rods) as a daily driver… but only one member did so successfully for any span of time, and he eventually blew.

Does more boost mean more power?

With turbocharged engines, the boost number–the pressure at which air is fed into the engine–is often equated with the amount of power on tap. But that isn’t necessarily the case. Turbos increase the pressure of air going into the engine, allowing more air to be crammed in. …

How much boost can a Mazdaspeed 6 handle?

The honest truth is that our engine can handle

over 10,000psi of

boost given a small enough intake. Boost is a measure of restriction, not power.