Can I solder a threaded fitting? Coat threads with pipe dope to keep them free of solder. Just a tiny dab of solder on the threads of a fitting can make a fitting nearly impossible to tighten.
It’s best to solder a threaded fitting to a pipe before you connect the other end of the pipe
.
Can I solder close to Teflon tape?
Soldering close to Teflon tape
can cause flu-like symptoms
, I have worked with Teflon pipe and tubing.
Can you sweat a threaded pipe?
How do you solder threaded copper pipe?
Can you solder a brass fitting?
As an alloy of copper and zinc, brass is compatible with copper, and manufacturers produce many common plumbing fittings with the material.
Solder adheres as well to brass as it does to copper, so the fittings are usually molded with slip joints so you can solder them to the pipes
.
Can you solder near a shark bite?
How far away from a SharkBite joint do I need to be in order to solder?
It is recommended to solder any joints prior to installing a SharkBite fitting
. The heat from the torch can be transferred through the pipe and potentially damage the O-ring.
What’s better compression or solder?
Standard compression couplings vs soldered joints
In conditions where a joint is prone to flexing, this can affect the integrity of a standard and/or flared compression joint;
a soldered joint is preferable
. A soldered joint is more difficult to install and takes longer, requiring specific tools.
At what temp does plumbing solder melt?
Most home plumbing repairs use soldering materials, which are generally heated to temperatures around 360 degrees Fahrenheit. Sometimes, the temperatures need to be hotter, and an alloy that melts at
840 degrees or less
is considered solder.
Why do they call it sweating copper?
The walls of copper pipe, however, are too thin and soft to be threaded, so a different sort of fitting is used, called a sweat fitting. It’s called that
because the process of joining the various elements using solder involves heating them with a propane torch until they seem to sweat
.
How do you connect threaded copper pipe?
Can you overheat copper pipe when soldering?
If the metal being joined is too cool or too hot, tinning cannot occur.
Overheating is a major problem when brazing or soldering copper pipe
because the flux will burn (become oxidized), stop working, and become a barrier to tinning.
Can you solder copper fittings?
Soldering vertical copper pipe shouldn’t be too different from working horizontally
. If the joint and tip are hot enough, the solder should flow right in. Heat the middle of the fitting and apply the solder as soon as it starts to melt. Remove the heat once the solder starts moving.
Is brass harder to solder than copper?
Brass is a denser, harder metal than copper
, though you can still solder the two together. Brass simply needs more heat than copper for the solder to melt into the joint between the two metals.
How do you attach brass threaded fittings?
Can you mix brass and copper fittings?
Since
brass doesn’t react with either the copper or the zinc
, one method is to make sure you have a threaded female end on both the copper and the steel pipes, and then connect the two by simply inserting a short threaded brass nipple between them.
Why do plumbers not like shark bites?
Another possible disadvantage to using SharkBite fittings is that
many plumbers feel that these fittings simply aren’t strong enough to create a tough, durable connection
.
Are shark bites better than solder?
To utilize SharkBite fittings, you simply have to press them into the ends of both pipes that you want to connect. It’s that easy. There are no tools needed, and linking them takes seconds. This is
much faster than soldering your pipes together
.
Can you use SharkBite on threaded pipe?
The actual SharkBite push to connect fittings are not designed to press onto galvanized pipe
. For mating your PEX to galvanized, SharkBite makes a threaded to press fit transition adapter. You will need to square cut the end of your galvanized pipe and then rethread it.
Can you use plastic pipe compression fittings?
Compression fittings on plastic pipe
A compression fitting works in the same way on a plastic pipe as it does on a copper pipe except that you need to put in a liner
, which is there to keep the end of the pipe perfectly round.
Can I use compression fittings on copper pipe?
Compression fittings in the world of plumbing are very common.
They are a safe way to connect copper pipe without the use of heat
making them popular with DIY’ers. Many different types of valves, tees, connectors and utilities require compression fittings in order to make them water tight and safe.
What does sweating mean in plumbing?
“Sweating pipes” is one term homeowners may hear when maintaining their pipes. Sweating a pipe refers to
soldering a pipe or the joint
. Sweating seals a new joint or mends a fault. When sweating a pipe, it is important to do the job correctly so that a soldered pipe can last for years and years.
Can I use electrical solder on plumbing?
Deteriorated wiring may cause the connection to fail. Electrical shorts or even fire may result. Making the opposite switch—
substituting electrical solder to join plumbing pipes—is now illegal in many areas of the country
. Electrical solder is commonly a 60/40 blend of lead and tin.
Can I use any solder for plumbing?
Typically, electrical solder contains rosin core flux; plumbing solder uses an acid-based flux. So
it’s not a good idea to use plumbing solder for electrical connections
because the acid in the flux can damage the wiring and lead to connection failure.
Is plumbing solder different from electrical solder?
Electrical Solder
Electrical solders have a lower melting point (around 360 ̊F), while solders utilized in plumbing have higher melting points, usually well over 400 ̊F
. This is why electrical soldering can be done using a soldering iron while a lot of pipes soldering utilizes a gas torch to heat up the metals.
What’s the difference between soldering and sweating?
“Sweating” and “soldering” are synonymous terms used to describe the process of using heat and solder to join copper pipe and fittings to one another. You can tell your neighbor you’re heading downstairs to “solder” a joint—but
“sweating” makes you sound much more worldly and DIY hip
.
Where do you put flux when soldering copper?
Does flux burn off?
A tacky flux is much easier to apply and clean in a controlled manner than liquid flux, and will stick around for the whole soldering process, unlike
liquid fluxes that typically evaporate or burn off before the soldering is completed
but can also wick down into the wire and cause problems later.
Can you join copper pipe without welding?
It is possible to connect a copper pipe without soldering
. Copper has found a home in many types of piping systems, from hot and cold potable water to fire protection systems.
How do you install threaded pipe fittings?
How do you fix a leaking copper pipe without soldering?
Is soldering pipes going to be illegal?
Which product category is covered by the law?
State law prohibits the use of any pipe, pipe or plumbing fitting or fixture, solder, or flux that is not lead free in any public water system or facility providing water for human consumption
.
Can you use too much flux when soldering?
How long can you leave flux before soldering?
Been working with a plumber mate of mine today, he says
two days tops
, but depends on conditions and manufacturer.
Can you solder copper without flux?
Can you Resolder?
Do you need flux to solder?
When joining two metals in a soldering process, like used in PCB assembly,
flux is required to achieve a true metallurgic bond
. That ensures the solder joint doesn’t crack or come loose even with the day-to-day wear-and-tear.
