Yes. You can use chainsaw (bar) oil as a wet bike chain lube
and would be best used for riding in inclement weather where you need a sticky oil that will not get washed off from rain or wet conditions.
Can you use chain saw chain oil on a bike chain?
Chainsaw oil: Chainsaw oil is used to lubricate chainsaws, which requires the oil to be thick and sticky. Applying chainsaw oil on your bike chains should
keep them lubed in the heaviest rainstorms
. It’s not recommended for any other weather conditions. The thick oil creates too much of a hassle for frequent use.
What can I use to oil my bike chain?
So, aside from brand bike chain lube, the most common options people opt for include
olive oil, household greases, and cooking oil
.
Can you mix bar and chain oil?
Is bar and chain oil the same as 2 cycle oil?
Can You Use 2 Cycle Oil As Bar Oil?
You should only use two-cycle oil as the mix, never as a chainsaw bar oil alternative
. Using two-cycle oil on the bar will not provide enough tackiness to stick to the chainsaw chain in the summer months. Two-cycle oil also will not work in the winter.
What type of oil is bar and chain oil?
Rapeseed-based (usually called canola) oil
is currently the most common environmentally compatible chain-and-bar lubricant. Vegetable-based oils are triglycerides or natural esters that come from agricultural crops.
Can I use olive oil for bike chain?
Is it OK to use WD-40 on bike chain?
WD-40 is a great bike chain lube water based lubricant and will not only lubricate the chain well, but will also keep it rust and corrosion free
. It also minimizes the accumulation of dirt which reduces the wear and tear of the chain.
Can WD-40 be used for bike chains?
WD-40 Specialist
®
Bike Chain Lube is an all-conditions lubricant that
protects bicycle chains in dry, wet, or varying conditions
. The fast and easy-to-use aerosol spray helps prevent squeaks and extends the life of the chain.
Can I use Vaseline on my bike chain?
Petroleum jelly can work as a chain lubricant, but it has some shortfalls
. What is this? First, it is more viscous than regular chain lubes or oil. Therefore, it doesn’t easily reach the inner surfaces of a bike chain.
Should I oil my bike chain?
“
At a minimum, a rider should re-lube the chain prior to every ride
, even if they are re-lubing over a dirty chain. For efficiency, it’s better to re-lube over a dirty chain than do nothing at all,” suggests Smith.
How do I lubricate my bike?
Does bar and chain oil expire?
Bar oil itself lasts indefinitely
; it’s the containers holding the oil that determines the shelf life. Bar oil will stay in most bottles between 3 and 7 years. The oil base determines the length of time; synthetic oils will last the longest, whereas mineral and plant-based oils have a shorter shelf life.
Can I use 10w30 for chainsaw bar oil?
As a matter of fact,
you can actually use regular 10w30 motor oil on a chainsaw as one of the alternatives in case you don’t have bar and chain oil
. That’s because 10w30 oil has enough thickness and viscosity that will allow it to withstand the friction that is happening whenever you are using a chainsaw.
Can I use 5w30 for bar oil?
You’ll be fine
.
Can you use motor oil for 2-cycle engine?
There is no problem with that
. If you were to use 2 stroke oil, you would use it in the same proportions. In order to maintain the lubricating qualities of the oil added to the fuel, too little can cause bearing and bore damage.
Can I use transmission fluid as bar oil?
It might not be as tacky as dedicated bar oils
, though. I use ATF to lubricate the bar on my firewood processer. It works real well.
What is bar oil equivalent to?
Canola oil
is another good substitute when you don’t have access to vegetable oil. It’s able to handle high heat and protect your chainsaw bar and chain from damaging friction. That is only if you keep it well lubricated while cutting. Canola oil is also better at handling lower outdoor temperatures than vegetable oil.
What does 10w30 mean?
Answered January 07 2020. The 10W30 designation on engine oil means that
the viscosity of the oil is rated at 10W when an engine is cold and 30 when the engine is hot
. This is different than an oil labelled 5W30, which has a thinner viscosity when the engine is cold at 5W.
Can I use 5W 20 for chainsaw bar oil?
They are 5w20 and 10w30, which would be best?
You can but it’s not very good for the chain or the environment
. The Husqvarna / Stihl stuff is much thicker and vegetable based so it doesn’t fling off the chain as easily or poison your garden! 10w30.
Can I use baby oil on my bike chain?
for 2 hours of indoor use you could lube it with any common household product: Baby Oil, K-Y, AstroGlide, Vaseline, candle wax, probably even butter or margarine
. Just make sure you clean it just as throughly afterwards as you did prior to discovering you’re all out of chain lube.
Can we use coconut oil for cycle chain?
Yes you can but it is not recommended
. Engine oil is very thick and it will attract more dust particles which will increase the frequency of chain cleaning and servicing of your bicycle.
How often should I lube my bike chain?
Bicycle Tutor recommends cleaning and lubricating your bike’s drive chain
at least once every month
to maintain optimal performance and protection. The chain and drivetrain are typically the dirtiest parts of your bike, and this dirt is bad news for bike longevity and performance.
Can I use motorcycle chain lube on a bicycle?
Yes definitely you can use
. I have been using gear oil of 140 grade on my dominar400 since past 9months. But before lubricating the chain make sure you clean the chain with diesel and wipe it with a cloth then apply the gear oil.
