The cooler should not make a difference on that. If the lines go in either the top or the bottom, they can be hooked up any way . If one goes in the top and one in the bottom, make sure the cooler fills from the bottom.
Does it matter which transmission cooler line goes where?
Favorite Answer Yes it does matter . The cooler of the two lines is the return line and the one to install the transmission cooler on. Factory trans cooling lines to radiator, cooler, whatever it is.
Are Transmission coolers directional?
Can Transmission Fluid Flow Through Either Direction on a Transmission Cooler. ... The cooler can have fluid flow in either direction through it.
Does it matter how you mount a transmission cooler?
The cooler can be installed with the hose fittings in any position that will make the installation easier or look more professional on the vehicle. It does not matter which fitting on the cooler is used for the inlet or outlet .
Can I run two transmission coolers together?
We Keep Our Transmission Chilled With Not One, But Two Derale Coolers. ... There’s a direct link between a transmission’s temperature and its lifespan: a transmission that gets too hot will absolutely fail more quickly than one that stays within a normal operating temp.
What happens if transmission cooler lines are backwards?
If you had it reversed, the pump would be trying topush fluid through the bottom of the cooler, up through the cooler, out the top into the bottom of the rad , and up through the rad to the top.
What is the best transmission cooler?
Our top pick for the best transmission cooler is the B&M SuperCooler Automatic Transmission Cooler , which comes with a complete installation kit. For price-conscious shoppers, the Hayden Automotive Rapid Cool Plate and Fin Transmission Cooler is a great option.
Can a transmission cooler be too big?
Too big could be a concern if mounted in the front of the rad creating a loss of air flow to keep the engine cooled . Years ago , GM released a TSB about overcooling the transmission in cold climates .
Are transmission coolers worth it?
A transmission cooler will just help to prolong the life of the transmission by keeping the fluid cooler . Transmission fluid cannot be cooled too much, so the addition of a cooler is a good idea, especially if you are towing.
Does a transmission cooler need a fan?
Air flow is on of the biggest factors in allowing your transmission cooler to do its job, as long as it is placed in a spot in front of the vehicle. ... If you are in a situation where you cannot use a cooler in front of the car where it can get enough air flow, it is recommended to use a cooler with a fan .
Do all vehicles have a transmission cooler?
While all automatic transmission equipped vehicles have a transmission cooler in their radiator , this might sometimes not be enough to properly cool your transmission fluid.
Why do transmission lines go to radiator?
Car transmission lines connect your vehicle’s transmission to the vehicle’s radiator. ... Your car’s transmission lines are essential to preventing the transmission from overheating by carrying hot fluid away from the transmission until it is cooled and subsequently pumped back into the transmission .
Which is transmission return line?
The lower line near the bottom will be the return line.
Can you use rubber hose transmission line?
You can use rubber hose, but make sure it’s transmission cooler line rated . The pressure is quite low (12-15 psi). Double clamp it or use FI type clamps instead of the worm-drive style.
How do I keep my transmission cool?
Installing an external cooler can prove greatly effective in cooling your transmission and keeping it at a regulated temperature, which helps to prevent damage. External coolers also help to reduce friction to the transmission, which is another common cause of damage.
Can you over cool a transmission?
Can you over cool the transmission fluid? Answer: Transmissions are not highly sensitive to cool operating temperatures . However, in sub-freezing (20-30°F) weather conditions, transmission fluid can actually gel up in an external cooler and cease to flow, causing damage.
