Can You Put 170 Mm Fork On 160 Mm Bike? - Fixanswer

In general, bikes will happily accept forks that are up to 20mm larger than their designers intended . Feel free to go beyond that if you must, but be prepared for a bike that the manufacturer didn’t really intend to create. That doesn’t mean it will suck, but it’s just something to be aware of.

Can I put a 180mm fork on a 160mm bike?

According to Commencal, the frame should be able to handle up to 170mm on the 2018 frame. 160-170mm is the recommended travel from what I found, though if you need 180mm, contact Commencal for the most accurate info . Also, keep in mind that putting a larger fork will raise the front of the bike.

Can I put a bigger fork on my MTB?

Can I put 150mm forks on a 120mm bike?

If you are one who likes to test things and push boundaries and if the frame was no longer of any value to you using a 120mm fork, you could give the 150mm a go and see what happens. But just be ready for the worst to possibly happen. It is possible, nothing will prevent you from doing so .

Is 150mm travel too much for a hardtail?

Those roots and rocks can ping you offline, despite being sure of your steering inputs. Too much travel can also dull the feedback of your trail bike. We recommend that a trail fork ideally have 34mm stanchions, at 130-140mm, for a 29er – possibly, up to 150mm, for the smaller 27.5in wheel size .

How much can you Overfork a bike?

A more important consideration is that most frames are designed and tested to failure with a specific fork length/travel in mind, so in most cases, over-forking your bike by more than 10mm will void your warranty .

How much travel do I need on my hardtail?

It depends totally on your riding style and the intended use. For pretty much XC or dirt jump, go with a 100mm XC or dirt jump fork. For general trail riding a 120 to 130 would work well. For AM to light Free ride a 140 to 160mm fork would be the ticket.

Can I put a 140mm fork on a 100mm bike?

There is no good reason to slap 140mm fork on a frame that is designed for 100 . It will no ride better and it may break, like many other already noted.

Can you put a 27.5 fork on a 26 frame?

Condensed answer: A 26-inch wheel can be easily installed on a 27.5 fork if both are disc brake ready . If the fork uses rim brakes, however, the braze-ons would be a bit higher, and the calipers won’t catch the rim.

What size forks do I need?

The traditional standard has long been 1 1/8” but some modern bikes feature larger 1.5” head tubes or even tapered versions, where the diameter of the tube at the bottom (1.5”) is larger than at the top (1 1/8”) , so you’ll need a fork with a tapered steerer tube to match .

Can you put a 130mm fork on a 100mm bike?

at 130mm you’ll probably be fine, I wouldn’t put anything bigger on there . The kona frames are pretty strong, I used to run a 130mm fork on my 100mm jump bike for AM and a lottle more FR riding, I was fine.

Can I put a 160mm fork on a 150mm bike?

A 160mm will probably slacken the bike a bit and make for a more stable DH experience at the expensive of climbing ability . Running up to 180mm on a bike designed around 150mm will probably be too much, and make the overall handling poor and undesirable.

Can I put a 120mm fork on a 80mm bike?

120mm would be long for an XC frame that came with an 80mm fork. I doubt the manufacturer would recommend this , however lot’s of people do those kinds of swaps without significant issues. It is pushing the design limits of the frame, and if you’re pushing the limits of what the bike can do, you may run into problems.

Can I put a 120mm fork on a 100mm bike?

For all around riding, should be fine , but you may notice it’s a bit harder to keep the front wheel down on the steep uphills. You’re turning black metallic.

Can I put 130mm forks on a 120mm bike?

Nope. It will be fine and will take more than 10mm to make an appreciable change . You might notice the handling difference, but it will be slight and won’t negatively affect anything.

Can I put a 150mm fork on a 100mm bike?

Pretty common swap . a lot of guy’s do it and run the sag a bit deeper . There is a minimal effect on the geo. , in most cases it works just fine .

Can I put 140mm forks on a 120mm bike?

Going from 120 mm up to 140 mm should be perfectly fine . It will probably give you 1 degree of slack angle to your front end and raise your bb height by possibly 1/2′′.

Is 150mm travel enough for Enduro?

What should I look for in the best enduro mountain bikes? An enduro bike is basically a mountain bike with at least 150mm of suspension travel , but more commonly 160-180mm. They’re built for the rigours of racing full-bore downhill whilst being sufficiently efficient on climbs and contouring trails too.

Is 150 mm travel too much?

150mm is absolute overkill for every trail in the lower peninsula . Get a downcountry bike instead if you want to go the full suspension route. Or a rowdy hardtail.

Can you reduce MTB fork travel?

Yes, your a2c will change by whatever you reduce the travel by . The spring rate will also be affected so you will have to add a few more psi to achieve the correct sag (according to the Fox link below). Keep in mind that reducing the travel will also change the geometry of your bike. Take a look at the link below.

Will this fork fit my bike?

The main thing you need to look for is the steerer size. Most Mtb headtube is 1.1/8′′, a few are 1.5′′ or the combo of the two, tapered steerer. So as long as the fork is 1.1/8′′ you are good to go .

How does fork length affect handling?

Longer offset results in less trail, which makes for a lighter but twitchier steering feel . Conversely, shorter offset forks increase the trail, which makes for more stable, heavier steering especially in steep corners or bumpy sections.

What happens when you over fork a bike?

Adding more than 10mm to your axle to crown length may cause stress on your frame that it wasn’t designed to handle . Also, adding a longer fork usually voids the warranty on the frame. The ride effects of a longer fork will be a slacker head tube angle, and higher bottom bracket.

Is 150 mm of travel enough for downhill?

Long-travel bikes usually have 150-170mm of rear travel to handle tough downhill trails . Front travel often matches rear travel but sometimes can be more. Trail and enduro bikes fall into this category. They absorb big hits and smooth out rough terrain.

Is 160mm travel too much for trail riding?

160mm of travel is only really needed if you’re hitting big hucks, or you’re smashing really long bouldery fast descents . Do I need 160mm travel? 99% of the time, no.

Is 170mm travel too much?

But Yeah, 170mm will still be fine , you are getting on for DH-esq travel, however if you think you might make use of it, or it will help you man up a shade more then there’s no harm in giving it a whirl.