- They are not easy to implement in a large network.
- Managing the static configurations can become time consuming.
- If a link fails, a static route cannot reroute traffic.
What is a disadvantage of using dynamic routing protocols?
- Resources. Dynamic routing requires more resources such as CPU, RAM and Bandwidth. …
- Communication. Some machines in the network may have problems in communicating with dynamic routing protocol. …
- Complexity. …
- Security. …
- Bandwidth Shortages. …
- Cost. …
- Administration Control.
What is an example of static routing?
Static routes are created in global config mode, and require a destination prefix and a way to get there. For example, let’s say that our router’s Serial 1/1 interface, with an IP address of 192.168. 1.5/30, has a point-to-point link to another router’s Serial 2/2, with IP address 192.168. 1.6/30.
What are two advantages of static routing?
Static routing is
more secure because it does not advertise over the network
. Static routing scales well with expanding networks. Static routing requires very little knowledge of the network for correct implementation. Static routing uses fewer router resources than dynamic routing.
Which is not an advantage of static routing?
– Static route configuration is not
fault tolerant
without configuring multiple static routes to each network with varying administrative distances. All other options are incorrect because these are the advantages of static routes over dynamic routing protocols.
What are the advantages and disadvantages of dynamic source routing protocol?
Its main advantage is that
routes are maintained only between nodes that need to communicate
. This reduces the overhead of route maintenance and drawback is that packet header size increases with route length due to source routing.
What are two advantages of dynamic routing?
- It is straightforward to configure.
- It adapts to network topology changes.
- It is suitable in a network where many routers are used.
- Configuring dynamic routing does not require detailed knowledge of the network.
What is advantage of dynamic routing?
Automatically maintains routing tables
.
Which of the following is a disadvantage of using the OSPF protocol?
There are some disadvantages of OSPF like,
it requires an extra CPU process to run the SPF algorithm
, requiring more RAM to store adjacency topology, and being more complex to set up and hard to troubleshoot.
Which three advantages are provided by static routing?
They do provide
better security, use less bandwidth, and provide a known path to the destination
.
What is dynamic and static routing?
Static routing uses preconfigured routes to send traffic to its destination, while dynamic routing uses algorithms to determine the best path
.
Where is static routing used?
Static routes are most often used
to connect to a specific network or to provide a Gateway of Last Resort for a stub network
. They can also be used to: Reduce the number of routes advertised by summarizing several contiguous networks as one static route. Create a backup route in case a primary route link fails.
What are the advantages and disadvantages of static routing?
- Predictability. The path that static routing takes to the destination is very predictable. …
- Network Overheads. Unlike dynamic routing, static routing does not contain any overheads ; almost zero. …
- Configurations. …
- Resource Requirement. …
- Bandwidth.
Which of the following is a disadvantage of static routing quizlet?
Initial configuration and maintenance is time-consuming
. Configuration is error-prone, especially in large networks. Administrator intervention is required to maintain changing route information. Does not scale well with growing networks; maintenance becomes cumbersome.
What are the advantages and disadvantages of wireless local area network?
- It’s a reliable sort of communication.
- As WLAN reduces physical wires so it’s a versatile way of communication.
- WLAN also reduces the value of ownership.
- It’s easier to feature or remove workstation.
- It provides high rate thanks to small area coverage.
What is the major drawback of DSR routing protocol?
The disadvantage of DSR is that
the route maintenance mechanism does not locally repair a broken down link
. The connection setup delay is higher than in table-driven protocols. Even though the protocol performs well in static and low-mobility environments, the performance degrades rapidly with increasing mobility.
What are some of the benefits of routing?
Benefits or advantages of Routers
➨
It provides connection between different network architectures such as ethernet & token ring etc
. ➨It can choose best path across the internetwork using dynamic routing algorithms. ➨It can reduce network traffic by creating collision domains and also by creating broadcast domains.
Why dynamic routing is preferred over static routing algorithm in a network which changes continuously?
In dynamic routing, routes are updated as per the changes in network. No complex algorithm used to figure out shortest path. Dynamic routing employes complex algorithms to find the shortest routes.
Static routing provides higher security
.
What is dynamic routing in networking?
Dynamic routing, also called adaptive routing, is
a process where a router can forward data via a different route for a given destination based on the current conditions of the communication circuits within a system
.
