- The model number is printed on a tag that is attached to the cold water supply line of the faucet.
- The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet.
- The model number, or part number, is typically preceded by “P/N.”
How do I know what kind of faucet I have?
- Find the logo. The first and easiest way to find out the brand of your kitchen faucet will be if you can locate the logo somewhere on it. ...
- Find a model number. ...
- Count the splines on the broach and measure the stem. ...
- Distinguishing features. ...
- Use a broach gauge.
How do I know what model Moen I have?
Exact model numbers can be found on your box or on your instruction sheet . If unavailable, you may find the general family series number on the back of the spout (non pullout).
Where is the model number on a american standard faucet?
Where is the model number on a american standard faucet? Carefully remove your tank lid, and place it gently on the floor. You’ll notice a four-digit number located on the back of the tank, near the water level mark . This is your tank model number.
Are all Moen shower valves the same?
For many years Moen tub/shower valves have been manufactured using one of three valves. These valves are Standard, Posi-Temp and Moentrol . Although the look is similar, the trim is not necessarily interchangeable. ... If this is the way your Moen valve operates, any Posi-Temp trim will fit.
How do I know if my Moen cartridge is bad?
- Leaking from the handle, tub spout or shower head when off.
- Difficult to open or close shower valve.
- Difficult to turn shower handle.
- Inability to get very hot or very cold water.
How do I identify my Moen shower valve?
Look closely at the handle buttons that were attached to the shower valve. Typically, “Moen” will be written in the middle of the “Hot” and “Cold” buttons . If you do not see this, the handle buttons have been replaced, or the “Hot/Cold” button is a lever (wall escutcheon).
How do I know if my faucet cartridge is bad?
Signs that a cartridge faucet needs repair are water dripping from the spout , difficulty in adjusting the water temperature, hot water entering cold water outlets like toilet supply lines and inadequately heated water at some faucets.
How do I know if I have a frost free faucet?
Determine if your faucet is frost-free or not.
A rule of thumb is that if the faucet has a knob that’s perpendicular to the house, it’s frost-free . The knob turns a long stem that closes a valve inside the house where it’s warm. If the knob is at a 45 degree angle, it’s not frost free, and it needs to be winterized.
What does 3 hole faucet mean?
Three holes are used for the spout and two handles . A fourth hole is typically used for an accessory, such as a soap dispenser or side sprays. ... If you’re installing a single-handle faucet into a sink with three holes, the deck plate will usually cover up the unused openings.
How do you read an American Standard model number?
For American Standard, you should look for the 7th and 8th digit of the model number . It will be a number divisible by 6 or 12, and represents the nominal BTU of the system in thousands.
How do I know what model my American Standard toilet is?
Where can I find the model number of my toilet? Carefully remove your tank lid, and place it gently on the floor. You’ll notice a four-digit number located on the back of the tank , near the water level mark. This is your tank model number.
How do you read American Standard Serial numbers?
- Year of manufacture – The first numerical digit of the serial number.
- Week of manufacture – The 2nd & 3rd numerical digits of the serial number.
- Work Day of the week of manufacture – The 4th numerical digit of the serial number.
How do I know what kind of shower valve I have?
Look at the center of the trim plate behind the shower handle to find a brand name or manufacturer symbol . If you see a “K,” the faucet is a Kohler unit; an “M” signifies Moen. American Standard, Delta and Price Pfister typically print their entire name on the faucet itself.
How do I know what shower cartridge I have?
Use a caliper or ruler and measure the cartridge. Do this by measuring from the base to the tip (from seat to splines). Pay attention to the length tier of your cartridge (Lengths range from 1–12).
Can you replace a shower handle without replacing the valve?
The handle and trim for the tub/shower controls can also usually be replaced without redoing any plumbing by using a universal replacement kit (available for most brands at home centers and plumbing supply stores). ... Tub spouts (faucets) unscrew (Photo 2), or pull off if they have a setscrew underneath.
