If you want to add cross weight put
a turn in the right front and left rear and take a turn out of the left front and right rear
. On non coil over cars you may need to go two turns on the rear for every one turn on the front. By adjusting all four corners you will help maintain your ride heights.
What linkage should be disconnected before adjusting the corner weights?
Disconnect one drop link at the front and one at the rear
. This disables the roll bar and prevents it pulling the opposite side to be the same which affects the corner mass significantly. Put the driver in the seat of the car or their equivalent mass in the driver’s seat.
How do you corner weight of a vehicle?
To add weight to a given corner,
raise the ride height at that corner or lower the ride height at an adjacent corner
. For example, if your initial setup is 52 percent cross-weight, and you want 50 percent cross-weight, lowering the right front or left rear corner will decrease cross-weight percentage.
How do you scale a race car?
To calculate cross-weight percentage,
add the RF weight to the LR weight and divide the sum by the total weight of the car
. Cross-weight is also called wedge: If the percentage is over 50 percent, the car has wedge; if below 50 percent, the car has reverse wedge.
How do you adjust cross weight in Iracing?
On oval track cars, cross-weight is usually used in conjunction with stagger (where the right rear tire is larger in circumference than the left rear tire) to
balance handling
. More stagger usually loosens the handling in left turns, so more cross-weight is used to tighten it up.
What does cross weight mean?
In circle track racing, the use of the term “crossweight” gives us an indication of the weight distribution on the four tires. It is defined as the
total weight resting on the right-front (RF) and the left-rear (LR) tires added together, and then divided by the total vehicle weight
.
How does cross weight affect handling?
On oval track cars, cross-weight is usually used in conjunction with stagger (where the right rear tire is larger in circumference than the left rear tire) to
balance handling
. More stagger usually loosens the handling in left turns, so more cross-weight is used to tighten it up.
What is Corner weight balancing?
Corner balancing is
the process of shifting the weight carried by each wheel to approach optimal values
. Although some weight can be shifted between wheels by physically relocating parts of the car, the corner balance process is focused on shifting weight by adjusting the suspension spring height.
What does cross weight do to a race car?
On oval track cars, cross-weight is usually used in conjunction with stagger (where the right rear tire is larger in circumference than the left rear tire)
to balance handling
. More stagger usually loosens the handling in left turns, so more cross-weight is used to tighten it up.
How much does it cost to corner balance a car?
Even on street cars, a proper corner balance can deliver a more balanced, neutral feeling car. This can help increase performance, allow the owner to drive the car more confidently, and reduce component wear. Corner
balancing packages begin at $300
.
How do you scale a dirt track car?
To calculate cross-weight percentage,
add the RF weight to the LR weight and divide the sum by the total weight of the car
. Cross-weight is also called wedge: If the percentage is over 50 percent, the car has wedge; if below 50 percent, the car has reverse wedge.
How do you scale a hobby stock car?
Top-level stock cars
exceed 200 mph (322 km/h)
at speedway tracks and on superspeedway tracks such as Daytona International Speedway and Talladega Superspeedway. Contemporary NASCAR-spec top-level cars produce maximum power outputs of 860–900 hp from their naturally aspirated V8 engines.
Why do you scale a drag car?
With your own scales,
you can accurately set up your car, plotting and adjusting front-to-back, side-to-side, and corner weights
. The scales also allow you to figure out exactly how much (and where) you’re pre-loading the car. It’s also a good idea to regularly scale the car.
How do you determine cross weight?
Cross-weight percentage compares the diagonal weight totals to the car’s total weight. To calculate cross-weight percentage,
add the RF weight to the LR weight and divide the sum by the total weight of the car.
What is wedge in a dirt race car?
Wedge is
the offset balance within your tires of your car
. … These include the rear bite on a dirt track car, the wedge, the rear weight, the spring rate, the left weight, and the tracking of the wheels.
What is wedge in race car?
The diagonally related weight between the left-rear and right-front wheels is referred to as cross-weight or simply wedge. It is often measured as
a percentage of the vehicle’s total weight
. When more than 50 percent of the car’s weight is on the left-rear and right-front wheels, the car is said to have more wedge.
