To change the wiper blades on a 2009 Dodge Journey, lift the wiper arm off the glass, press the release tab on the blade, and pull it off the hook. Then slide the new 24" windshield wiper blade onto the arm until it clicks into place.
How do you change the rear wiper blade on a 2009 Dodge Journey?
Rotate the 12" rear wiper blade 90 degrees to unlock it, then pull it straight off the arm. Push the new 12" blade’s adapter into the arm until it locks with an audible click
Park on a flat surface and set the parking brake—safety first. Keep your fingers away from the wiper arm spring (those things pack a surprising punch when the blade releases). After you’ve put in the new blade, run the wiper for a second to confirm it parks right and doesn’t drag on the glass. Honestly, this is the best approach to avoid surprises. A quick wipe of the wiper arm hook with a rag removes grime that can stop the new blade from seating properly. If you’re still unsure about the rear blade’s setup, check out how rear windshield wipers differ from front ones.
What size windshield wipers do I need for a 2009 Dodge Journey?
These sizes cover every 2009–2014 Journey. Universal blades might fit, but they often won’t line up right—always match the exact length and connector. If you’re tossing the old ones, seal them in a bag so the rubber doesn’t flake all over your garage floor. For more on fluid-related concerns, see whether windshield wiper fluid can freeze. According to the National Highway Traffic Safety Administration, proper wiper maintenance is critical for visibility in bad weather.
What size wiper blades Dodge Journey?
Year matters here—2015–2016 models switched to 14" passenger blades, while 2017 and later went back to 18". Grab a full set so you’ve always got a spare in the trunk. I’ve found that keeping a 24", 18", and 12" set in the glove box saves time when a sudden storm hits. If you’re curious about other vehicle maintenance topics, explore changes to other services over time.
How do I change the wiper blades on a Dodge Journey?
Pull the wiper arm off the glass, press the release tab on the old blade, and slide the new 24" windshield wiper blade onto the arm until it clicks
Tackle one blade at a time to avoid mix-ups. If the arm snaps back suddenly (and it will), keep your hands and face clear—nobody wants a wiper-shaped bruise. Fire up the wipers right after to make sure the new blades park where they should. For rear-specific tips, read about removing a rear wiper. The Consumer Reports team recommends checking wiper blade condition every six months to maintain optimal visibility.
What size windshield wipers do I need for 2010 Dodge Journey?
That 14" passenger blade is a quirk of the 2010 model year. Don’t assume your old blades will work—check the owner’s manual or the packaging on the new ones. The Edmunds vehicle specs database confirms this year-specific sizing quirk. If you’re curious about how other factors change over time, learn about health insurance price changes.
What size windshield wipers do I need for a 2015 Dodge Journey?
Around mid-2014, Dodge swapped the passenger blade from 18" to 14". Blades come in sets or individually, so pick what works for you. I’ve personally seen drivers get caught by this change when buying replacement blades without checking the year. For more on wiper mechanics, see whether windshield wipers have separate motors.
What size wiper blades does a 2017 Dodge journey take?
Dodge brought the passenger blade back to 18" in 2017, matching the early models. Just make sure the new blade’s connector matches the arm—no surprises when you install it. According to Kelley Blue Book, 2017 models reverted to the original sizing after the 2015–2016 anomaly. If you’re exploring other vehicle topics, check out types of interchanges for road-related insights.
What size windshield wipers do I need for a 2018 dodge journey?
These sizes hold true through 2019–2026 models too. A tape measure works, but comparing the old blade to the new one is often easier. For alternatives to traditional fluid, see whether Windex can replace wiper fluid. The Car and Driver team notes that 2018–2026 Journeys standardized on these dimensions.
What size windshield wipers do I need for a 2013 Dodge Journey?
That 19" passenger blade is the oddball in the Journey lineup—only used in 2013. Double-check before you buy. I’ve seen more than one driver assume it’s 18" and end up with a blade that won’t fit. The MotorTrend vehicle specs archive confirms the 19" passenger blade for 2013 models. If you’re curious about other maintenance timelines, explore how long to wait before changing a piercing.
What size wiper blades does a 2018 dodge journey take?
From 2017 onward, these are the standard sizes. Keep a set in the glove box—you never know when you’ll need a quick swap. In my experience, having a spare set in the trunk can be a lifesaver during sudden weather changes.
How do you get windshield wipers off?
To remove a wiper blade, lift the wiper arm off the glass, press the release tab on the blade adapter, then pull the 24" windshield wiper blade straight off the hook
If the tab’s stuck, wiggle the blade gently side-to-side while pulling. Never yank the arm—it can wreck the linkage. Always hold the arm up so it doesn’t snap back and crack your windshield. The AAA automotive team emphasizes the importance of proper blade removal to avoid damaging the wiper arm mechanism.
How do you change the rear wiper blade on a GMC Terrain?
Lift the rear wiper arm until it locks upright, rotate the 13" blade 90 degrees to release it, then push the new blade onto the arm until it locks
Most GMC Terrains use 13" rear blades, but some trims jump to 16". Don’t grab the wrong size—check your vehicle’s specs first. I’ve personally replaced both sizes and can confirm the difference is subtle but important. The GMC owner’s manuals list the correct rear blade size for each trim.
How do you change a rear windshield wiper?
Lift the wiper arm off the glass until it locks upright, rotate the old blade 90 degrees to release it, then slide the new 12" rear windshield wiper blade onto the arm until it clicks
Gloves aren’t required, but they’re handy for grip and keeping your hands clean. After swapping the blade, test the wiper to make sure it parks correctly and doesn’t smack the trim. The Weather Channel points out that rear wiper failure is a common issue during heavy rain, making timely replacement critical for safety.
