How Do You Hook Up A DVD Player To A Coaxial TV?

by | Last updated on January 24, 2024

, , , ,
  1. Connect the RCA cables to the RCA outputs on the DVD player. …
  2. Plug the RCA cables into the corresponding inputs on the RF modulator, which converts the RCA signal into a coaxial-formatted signal.

How do you hook up a DVD player to a TV without HDMI?


Connect the composite video (Yellow RCA)

to the DVD player. Next, connect the White and RED audio RCA cables to the corresponding connectors on the back of the DVD player. Take the other side of the composite cable and and connect them to your TV.

How do you hook up a DVD player to an old TV?

  1. Plug the TV into the modulator's jack labeled either “to TV” or “output.”
  2. Connect the RCA yellow-colored video cable to the “video in” or yellow-colored “input” port on the modulator.
  3. Turn on the DVD player, TV, and modulator box.

What source should TV be on for DVD player?

To connect your TV to your DVD player, plug the included cables (

HDMI and/or composite cable

) into both the player and the TV ports. Then, make sure the TV and DVD player are both plugged in and turn them on. Insert a DVD to test it out.

What is a coaxial cable for DVD player?

What is a coaxial cable for DVD player? This type of

connection will allow you to hear standard stereo audio and 5.1 surround sound

. A coaxial digital output is often used when sending multi-channel audio from a DVD player or computer to your surround sound system.

Why does my TV say no signal when I plug in my DVD player?

Change the INPUT or source the HDTV is set to by pressing the INPUT button on the TV or its original remote. When you try different inputs, let the DVD player play a

disc and output a constant signal

. … If your TV has the correct INPUT or Source, unplug the cable and plug it back, or try another cable or port.

How do you hook up a DVD player to a smart TV?


Connect one side of an HDMI cable to the back of the DVD player

. The other side of the HDMI cable connect it to an available input on your TV. Turn on the DVD player, and using the TV's remote, select the corresponding input. At this point, you should see the DVD Player logo on your TV screen.

Why won't my DVD player work on my smart TV?


Ensure the video cable between the DVD player and TV is securely connected to both devices

. … NOTE: If the issue only occurs with the first DVD, then the disc may have dust, fingerprints or scratches. Ensure the TV and DVD player are set to utilize the same type of video signal, either progressive or interlaced .

How do you hook up a DVD player to a TV that has no yellow input?


Connect one side of an HDMI cable to the back of the DVD player

. The other side of the HDMI cable connect it to an available input on your TV. Turn on the DVD player, and using the TV's remote, select the corresponding input. At this point, you should see the DVD Player logo on your TV screen.

How do I switch my Samsung TV to DVD player?

  1. Locate the HDMI input on the back of the Samsung TV. …
  2. Insert one end of the HDMI cable into the “HDMI IN” port. …
  3. Plug the other end of the HDMI cable into the “HDMI OUT” port on your DVD player.

How do I connect my DVD player to my HDMI TV?

Step 1:

Plug the HDMI cable into

the Blu-ray or DVD player. Step 2: Plug the opposite end of the HDMI cable into the HDMI port on your TV. Step 3: That's it! Make sure to select the correct input on your TV to connect with your player.

What type of DVD player do you need for a smart TV?

If the DVD player has

an HDMI output

, that's generally your best bet, since smart TVs are sure to have an HDMI port. Many modern smart TVs have omitted some video connections, like S-Video or composite video. They rely instead on component video, which needs a few plugs.

How do I get my DVD player to play?

  1. Solution 1: Check if the DVD type is incompatible with DVD player.
  2. Solution 2: Clean the dirty DVD or try a different disc.
  3. Solution 3: Ensure solid connection between DVD player and TV.
  4. Solution 4: Install Third Party DVD Player Software.
  5. Solution 5: Update DVD Firmware.

Why does my TV say no signal when HDMI is plugged in?


Verify that the source device has power and is turned on

. If the source device is connected with an HDMI® cable: Make sure the TV and source device are both turned on, then disconnect the HDMI cable from one of the devices and then connect it again. … Try a new or another known working HDMI cable.

Why is my DVD player not reading the disc?

Use a soft cloth to clean the disc ; the disc may have fingerprints or smudges. Examine the disc for any cracks or scratches that might be interfering with playback. Make sure the disc playback is not restricted by parental control options. Make

sure the DVD disc is compatible with the player

.

How do I get HDMI to work on my TV?

  1. Acquire an HDMI cable.
  2. Connect one end of the HDMI cable into an available HDMI port on the TV. …
  3. Plug the other end of the cable into your laptop's HDMI out port, or into the appropriate adapter for your computer. …
  4. Make sure the TV and the computer are both powered on.
Charlene Dyck
Author
Charlene Dyck
Charlene is a software developer and technology expert with a degree in computer science. She has worked for major tech companies and has a keen understanding of how computers and electronics work. Sarah is also an advocate for digital privacy and security.