- Remove the fan shroud. …
- Remove the top radiator hose by using a screwdriver to loosen the clamps.
- Hook the ends of the water pump pulley lock on the bolts on the outside of the water pump pulley.
- Remove the large nut on the fan with the 1-1/16 wrench by turning counter clockwise.
How do you remove the fan clutch on a 2003 Ford f150?
- Remove the fan shroud. …
- Remove the top radiator hose by using a screwdriver to loosen the clamps.
- Hook the ends of the water pump pulley lock on the bolts on the outside of the water pump pulley.
- Remove the large nut on the fan with the 1-1/16 wrench by turning counter clockwise.
How do you remove the fan clutch on a 2004 Ford f150?
- Remove the fan shroud. …
- Remove the top radiator hose by using a screwdriver to loosen the clamps.
- Hook the ends of the water pump pulley lock on the bolts on the outside of the water pump pulley.
- Remove the large nut on the fan with the 1-1/16 wrench by turning counter clockwise.
How do you loosen a fan clutch nut?
Remove the Fan Clutch If you are ever wondering which way to loosen the fan nut (some are reverse thread) it will
always
loosen in the same direction as the fan turns when the engine is running.
How do you remove a fan clutch?
- Materials Needed.
- Step 1: Checking your fan clutch for problems. …
- Step 2: Remove the fan shroud. …
- Step 3: Remove the fan. …
- Step 4: Rock from side to side. …
- Step 5: Remove the bolts. …
- Step 6: Install the new fan clutch. …
- Step 7: Tighten the bolts.
How do I know if my fan clutch is bad?
To confirm the diagnosis, start with this simple test:
Spin the fan as hard
as you can on an engine that has not been started that day. If the fan rotates more than five times, you can bet the clutch is bad. You should feel some resistance and the fan may spin up to three times, depending on the ambient temperature.
Can a fan clutch be repaired?
While there are times you can repair the fan clutch, in
most instances it’s best to replace it
. … Your engine may have a hard time cooling down (overheating) or heating up since the fan clutch isn’t working.
Is 7.3 fan reverse thread?
yes it is reverse thread
. The belt will hold tension on the pulley so you can get the nut off.
Will a bad fan clutch cause AC problems?
Yes
, a bad fan clutch will cause A/C issues. The condenser needs air flow to cool hot refrigerant.
Will a fan clutch tighten itself?
it
will tighten itself down just fine
.
Can you remove fan clutch without tool?
The good news is that removing the fan clutch is possible even without turning to that special tool. You can remove the fan clutch without the special tool by
using a box wrench and hammer
. Fit the inch and a half box wrench over the fan clutch and hit it repeatedly with the hammer.
Is a clutch fan reverse thread?
Remove the Fan Clutch If you are ever wondering which way to loosen the fan nut (some are reverse thread) it will always loosen in the same direction as the fan turns when the engine is running.
Can I drive with a bad fan clutch?
A failing fan clutch can actually
cause the engine fan to become loose and wobble
. Sometimes this wobble can be heard while driving, especially at freeway speeds. You can turn on your car’s engine while the vehicle is in park or neutral, pop the hood, and see for yourself that the fan is wobbling as it spins.
What sound does a bad fan clutch make?
Usually a bad fan clutch will sound
like the fan blades rubbing against the radiator type noise
. Or a rattle. An easy way to check a fan clutch, with the vehicle OFF, grab the fan blade and try to move it from front to rear of vehicle.
What happens when a fan clutch goes bad?
A bad fan clutch may not engage properly or at all, and as a result,
will disable the fans or prevent them from working at maximum efficiency
. This may result in the engine overheating, which will lead to more serious issues if left unattended.
