- Find the diagnostic-link connector underneath the driver’s side of the car on the dashboard. ...
- Put the key into the ignition and turn it two clicks forward to the “On” position. ...
- Turn on the OBD II code reader and use the arrows to navigate the menu.
How do I get the airbag light off?
- Put the key into the ignition and turn the switch to the “on” position.
- Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
- Repeat Steps 1 and 2 two more times.
How do I reset my solid airbag light?
- Put the key into the ignition and turn the switch to the “on” position.
- Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
- Repeat Steps 1 and 2 two more times.
What does it mean when the airbag light stays on?
The airbag light indicates that something is wrong with the seatbelts or airbags . This means that it’s probably not safe to drive with the airbag light on. If it stays illuminated in your vehicle, we recommend having it towed to the dealership rather than driving it yourself.
Can you reset a airbag sensor?
Remove the terminal clamp and leave it disconnected for 5-10 seconds to allow the airbag sensor to reset. Then reconnect the battery terminal and turn the vehicle on. With a bit of luck, the light will stay off. If it comes back on then the best thing to do is to take your car in for a diagnostics scan.
How much does it cost to reset the airbag light?
This process can take several hours of time and usually costs a few hundred dollars, although depending upon the type of car it may be up to about $600 .
Can a blown fuse cause the airbag light to come on?
Blown fuses can definitely cause the airbag light to come on . ... When the airbag system is malfunctioning, a mechanic or auto parts store should be able to read the code that the system is putting out which will give them a clue as to what particular problem the airbag is having.
Is it safe to drive with the airbag light on?
Is it safe to drive with an SRS light on? ... It doesn’t necessarily mean that the car isn’t safe to drive but it’s like playing with fire if you do. When this light is on it means your safety system isn’t working at 100% and in some cases, it could mean that your airbags are disabled and will not deploy in an accident.
How do I know if my airbag sensor is bad?
You can easily tell if the sensor is functioning if the airbag warning light on the dashboard is illuminating every time you start the vehicle . But, if the airbag warning light stays illuminated after starting the vehicle, this is an indication of an airbag sensor problem.
Is the airbag light supposed to stay on?
The airbag warning light should only stay on when there’s a problem with the airbag system in the car . ... The light comes on for a few seconds and then goes off to show that it’s working. If it remains on, then there’s a problem with the system, and the airbag may not deploy in an accident.
Can you clear airbag codes?
No, scanners cannot clear these codes . These codes are stored after a vehicle accident and are also known as crash data.
Will removing fuse disable airbag?
Simply pulling the airbag fuse may not disable the airbags . Many ACMs utilize an internal battery to ensure deployment even if the power is cut.
Can you sell a car with the airbag light on?
You can sell it , but if someone asks about the airbag light, you should tell them what you know about it.
Is there a fuse for the airbag?
The airbags won’t be activated by the fuse . The whole system on most cars is inoperative if the service air bag light is on.
What does the airbag light look like?
The SRS warning light on the dashboard usually looks like a side view of a person sitting in a seat with a seat belt on, with a large circle (the airbag) in front of the person . It will normally light up briefly each time you start your vehicle, and then go off.
How much does it cost to fix airbag sensor?
The average price for an airbag crash sensor replacement cost is typically between $372 and $388 , with the total cost of labor estimated between $61 and $77 total. The average cost of the parts for the airbag crash sensor fix is around $311.
