How Do You Reset The Maintenance Required Light On A 1996 Honda Accord?

by | Last updated on January 24, 2024

, , , ,

If there is a vertical slot near the zero mark on the speedometer just insert your ignition key in this slot and press . This should reset the light. If there is no slot hold down the trip odometer reset button with the key off. Turn the key on and continue holding the button till the light goes out.

How do you reset the maintenance required light on a Honda Accord?

  1. With Reset Button on Instrument Panel.
  2. Turn the ignition off.
  3. Press the select switch and reset switch at the same time, turn the ignition switch to run, one position before starting.
  4. Hold them for at least 10 seconds, until the indicator resets.
  5. With Key Slot on Instrument Panel.

How do I turn off the maintenance required light on my Honda?

To reset the maintenance required indicator, turn the ignition switch to the LOCK position, then press and hold the trip meter reset button until the indicator resets .

How do you reset the maintenance required light on a 98 Honda Accord?

  1. Turn they key to the II position.
  2. Turn the key to the off position, and push and hold in the odometer reset button.
  3. Turn they key back to the II position, while still holding the button.
  4. After about 10-15 seconds, the light should go off.

How do you reset engine maintenance?

Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.

How accurate is Honda oil life indicator?

This is your Oil Life indicator, a convenient and important part of your Honda’s maintenance reminder system. With fresh engine oil, your percentage is 100% . It drops over time as you put miles on your Honda. So at 40%, your oil still has 40% of its lifetime remaining to do its job before it needs to be replaced.

How do you turn off your maintenance light?

Turn the vehicle off. Press and hold the odometer/trip display button while turning the ignition switch to ON, or pressing the push start button once. Remember: never use the brakes or fully turn the car on! Keep holding the button down until the maintenance required light turns off.

Why is my maintenance required light on after oil change Honda?

It’s basically just telling you that your car will need some kind of scheduled service soon . It could be an oil change, a tuneup, or maybe you need a new timing belt. When the light begins to flash at startup, you have about 500 miles or so to go before the next scheduled service.

What does it mean when the maintenance required light flashes on a Honda Accord?

The maintenance required light is notifying you that maintenance is required according to the driven distance on the vehicle’s maintenance schedule . The light illuminates for about 3 seconds and then flashes for about 15 second every 4,500 miles after the maintenance has been reset.

How do you turn off the maintenance required light on a 1999 Honda Accord?

IT’S a maintenance reminder. Turn key off , press and hold ‘reset’ button in gauge area on right , turn key on (just to ‘run’ position , not start) continue to hold button in for at least ten seconds , the light should then go off (reset).

How do I reset dashboard after oil change?

Insert the key into the ignition and turn it to the “on” position without starting the engine. Press the the gas pedal slowly to the floor three successive times within 10 seconds . Turning the ignition off. If the light is still on the next time you start the truck, repeat the process.

How serious is the maintenance required light?

It’s basically just telling you that your car will need some kind of scheduled service soon. It could be an oil change, a tuneup, or maybe you need a new timing belt. When the light begins to flash at startup, you have about 500 miles or so to go before the next scheduled service.

Why is my maintenance required light on after oil change?

Most often this just means your vehicle might be due for an oil change. The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset .

How far can you go on 5% oil life?

Hi There, Your oil life percentage is generally an estimated time designed to prompt the operator of the vehicle to have the oil changed as soon as possible. 5% is generally not something to be concerned about, but you should consider having the oil changed in the next 1,000 miles or less .

Can you trust oil life indicator?

The short answers are yes , but there are a vast number of variables that need to be taken into consideration, and both the customers and service technicians must be actively involved. The proper engine oil and the engine oil level must be maintained along with closely following the operator’s manual.

At what percent should oil be changed?

This does not mean that the car is not safe to drive. Over time, this percentage will drop even further. Maintenance should be down when the quality is at 5 % oil life because when it reaches 0%, the maintenance is overdue.

David Martineau
Author
David Martineau
David is an interior designer and home improvement expert. With a degree in architecture, David has worked on various renovation projects and has written for several home and garden publications. David's expertise in decorating, renovation, and repair will help you create your dream home.