How Do You Turn Off Anti Theft Radio?

1. Use an original key (not a copied one) and insert it into the ignition.
2. Turn the key into the “On” position. …
3. Leave the key in this position for 10 minutes until the “Theft System” light stops flashing and goes off.
4. Flip the key into the “Off” position and leave it there for five seconds.

How do I turn off Theftlock on my GM radio?

1. Put the key in the ignition and turn it to the “On” position. …
2. Press and hold radio preset buttons 2 and 3 for six seconds. …
3. Write this number down quickly and press the AM/FM button (within a 15 seconds). …
4. Write down this second number.
5. Turn the car's ignition off.
6. Call 1-800-537-5140.

How do you unlock Theftlock radio?

Dial 1-800-537-5140 to connect with GM's toll-free radio hotline

. Once you're connected, you'll be asked to provide your vehicle's radio identification number, along with a special dealer access code. You'll then be rewarded with a 4-digit retrieval code, which will allow you to unlock your radio.

How do I unlock my car radio without the code?

Turn on your radio and see if it displays CODE or LOC. If it does, turn off the radio.

Press and hold down the audio power button together with the SEEK button for about 50-60 minutes

. Then, it will turn on without entering the radio code.

How do I turn off anti-theft mode?

Insert the

car key

into your car's ignition and turn it on. The car's accessories will be activated but not the engine. Step 3: Do another check on the anti-theft light. If it isn't blinking any longer, then turn the key over to the Off position and let it sit for a couple of minutes.

How do you reprogram a GM radio?

1. Turn on your car. …
2. Press and hold down both the second and third preset buttons. …
3. Write down the two- or three-digit code that appears in the LED display.
4. Press the AM/FM button on the radio.
5. Write down the next two- or three-digit code that appears in the LED display.

How do I unlock my GM navigation radio?

1. Step 1: Insert your car key and set its mode to “Accessory” or “On.”
2. Step 2: Turn on your radio and check that the letters “LOC” are displayed. …
3. Step 3: Locate the preset buttons 1 and 4. …
4. Step 4: Push the AM/FM button to get another three-digit code.

How do I unlock my 2013 GM radio?

To unlock the radio in the 2013 Chevy Silverado You will start

by turning on the vehicle

. You will see the display indication “LOC” which is telling You the theftlock system is activated. Now press and hold the reset buttons 1 and 4 for ten seconds or 2 and 3 if You radio does not have a fourth preset button.

Where in the owner's manual is the radio code?

The best place to locate a radio code is in the owner's manual of your car. In most cases, the owner's manual will be

located in your glove box

and will include general automotive service and maintenance tips, along with instructions on how to operate each system on the vehicle.

Can I get radio code from VIN number?

The code is located on a card that comes with the original purchase of the vehicle, which we don't have. A person can call the dealership with the serial number of the radio and Vehicle Identification Number (VIN) of the vehicle

and ask for the radio code

.

How do I unlock my car radio?

Go to a car dealership

. Take your car to its manufacturer dealership to get the stereo unlocked. For example, if your car is a Honda go to a Honda dealership. Once you have proven that you are the owner of the car, the dealership will be able to retrieve the code from the manufacturer and activate the radio for you.

How do I reset my Chevy radio 2019?

To reset your Chevy MyLink system entirely,

hold down the Home and Fast Forward buttons simultaneously for 10 seconds

. This should reboot the system and resolve any problems that you're having.

How do I reset my Denali radio?

1. Navigate to your GMC IntelliLink home screen and click on ‘Settings. …
2. Select ‘Return to Factory Settings. …
3. You'll be offered three options: Restore Vehicle Settings, Clear All Private Data, or Restore Radio Settings. …
4. When prompted to either Continue or Cancel, click ‘Continue.

How do I reset my radio in my Chevy Impala?

Press the “AM/FM” button until “SEC”

appears on the radio display. Press the “ON” button on the radio. The radio is now reset.

How do I reset my GMC navigation system?

1. Navigate to your GMC IntelliLink home screen and click on ‘Settings'
2. Select ‘Return to Factory Settings'
3. You'll be offered three options: Restore Vehicle Settings, Clear All Private Data, or Restore Radio Settings. …
4. When prompted to either Continue or Cancel, click ‘Continue'

How do I unmute my GMC radio?

v • Press and release to access the phone display or answer an incoming call. Press to turn the power on. Press and hold to turn the power off.

Press to mute/unmute

the system when on.