| Cycle Sterilization Temp. Total Cycle Time (*does not include drying) | STATIM 2000 G4 | Unwrapped 135°C 6 Minutes | Wrapped 135°C 14 Minutes | Rubber/Plastic 121°C 20 Minutes |
|---|
What type of sterilizer is the STATIM?
STATIM is the fastest cassette sterilizer from start to sterile. Using only a small amount of water for each cycle, the STATIM heats and converts to steam in mere seconds. The innovative design of STATIM’s fully removable chamber allows for quick heating and cooling.
What is the difference between STATIM 2000 and 5000?
Larger than the 2000, the Statim 5000 has an additional sterilization cycle and a roomier cassette designed to process bulkier instruments and greater loads .
Is a STATIM an autoclave?
STATIM is the world’s fastest cassette autoclave from start to sterile, gentle on your instruments due to its innovative steam process and relied upon by the busiest of practices.
Does the outside of the Statim get sterilized?
The Statim is NOT intended for sterilizing textiles, liquids or biomedical waste . Instruments will remain sterile after a successful cycle until the cassette is disengaged from the unit. Unwrapped instruments, once exposed to ambient or external conditions, cannot be maintained in a sterile state.
How does Statim autoclave work?
The STATIM cassette autoclaves use clean, distilled water with every cycle, preventing the buildup of hand-piece lubricant and other water contaminants . The patented steam pulsing system ensures temperature consistency, and it quickly expels the air that causes oxidation, preventing instrument rust and corrosion.
How hot does the Statim 5000 GET?
Statim 5000 Wrapped Cycle
depressurizes to 115°C . The unit will condition up and down between 115°C and 132°C six times. This depressurization is to remove air from the cassette and bags.
Why is my STATIM leaking?
If there is a small steam leak or water under the unit after installing the new seal try another cycle . It may take time to seat the new seal. If the leak persists, remove the seal and reinstall. If unit continues to leak after installing seal for the second time try a new cassette lid or tray.
Is a STATIM a pre vacuum sterilizer?
More specifically, the STATIM ® Units use Dynamic Air Removal Steam Sterilization, by the method of SFPP technology , and the BRAVO TM Units use Dynamic Air Removal Steam Sterilization, by the method of Pre-Vacuum. Items are placed in the sterilizer according to sterilizer’s MIFUs.
How do you clean a STATIM 5000?
Wash the interior of the cassette with dishwashing soap or a mild detergent that does not contain chlorine. Scrub the inside with a cleaning pad designed for use with Teflon®-coated surfaces . Check the water reservoir filter every week and clean if necessary. Replace only if necessary.
How do I load a STATIM?
How much does a dental autoclave cost?
Bench-Top Automatic Dental
Sterilization temperature range: 122 degrees F – 258 degrees F. Cost: $100 – $1779 . Features include: Made of Class II acid-proof stainless steel.
Is the STATIM a gravity sterilizer?
The most commonly used sterilizers are steam and dry heat methods. Steam options branch out into these top utilized methods: Gravity cycle autoclaves (think Midmark or Tuttnauer), and steam flush pressure pulse sterilizers (think Statim).
What type of sterilizer is a STATIM 2000?
The STATIM 2000 is a reliable cassette sterilizer that’s compact enough to fit in procedure areas and fast enough to sterilize jewelry, expensive Lasik, PRK, endoscopic and cataract instruments, including phaco handpieces, between procedures – it can complete an unwrapped sterilization cycle in just six minutes and a ...
What part of speech is STATIM?
| Statim statim Adverb = at once, immediately, Immediately | ( | stat stare Verb = stand, stand still, stand firm | ) |
|---|
Is a Statim a Class B?
The STATIM B G4+ Vacuum Autoclave is a compact EN13060 compliant Class B steriliser that offers you speed, high capacity, safety, and efficiency. Its innovative sterilisation technology incorporates both pre- sterilisation vacuum for greater steam penetration and post- sterilisation vacuum for improved drying.
Where is the serial number on a Statim 5000?
The serial number is typically located in a couple of places on the autoclave: On the back-side of the front access panel (below the chamber door) .
How do you use STATIM?
How do dentists use STATIM?
How do autoclaves sterilize?
Autoclave sterilization works by using heat to kill microorganisms such as bacteria and spores . The heat is delivered by pressurized steam. Pressurization allows the steam to reach the high temperatures that are required for sterilization.
How do you calibrate a Statim 2000?
- Turn OFF main power and remove the cover from Your Statim.
- Short together PINs W1 with a “jumper” on the main PCB board.
- Turn ON the power.
- The LCD should display CALIBRATION with: 2 digits in the upper left, 2 digits in the upper right. ...
- Insert The Cassette.
How do I clear my Statim 2000?
A: To empty the reservoir, use the drain tube . If your Statim does not have a drain tube, a hand pump will suffice. Except when filling or emptying the reservoir, keep the reservoir cap securely fastened at all times.
