0.43 hours
or approximately 26 minutes.
How long does it take to travel 10 miles by car?
Compute the total drive time for each segment by dividing the number of miles in the segment by the average speed for that segment. For example, to go 10 miles at 20 miles per hour, you would divide 10 by 20 to find that segment would take you
0.5 hours
. To cover 185 miles at 60 mph, divide 185 by 60 to get 3.08 hours.
How far does a vehicle travel per second at 35 mph?
2) of second at 35 mph is
10.5 feet
.
How long does it take to drive a mile at 30 mph?
30 mph = 1 mile every
2 minutes
.
How long is 15minutes?
For example 15 minutes (
1⁄4 hour
) equals . 25, 30 minutes (1⁄2 hour) equals .
How long does it take to run 9 miles?
| Dist (mi) 6:00 /mi 7:30 /mi | 9 54:00 1:07:30 | 10 mi 1:00:00 1:15:00 | 11 1:06:00 1:22:30 | 12 1:12:00 1:30:00 |
|---|
How long is a 30 mile drive?
The time it takes to drive 30 miles will depend on the speed of the vehicle. If the vehicle is driving 30 miles per hour, it will take
one hour
to drive 30 miles.
How far will you travel at 30 mph?
| Speed Perception/Reaction Distance Overal Stopping Distance | 30 mph 44 feet 89 feet | 40 mph 59 feet 139 feet | 50 mph 73 feet 198 feet | 60 mph 88 feet 268 feet |
|---|
How long is a 25 mile drive?
If you’re driving in residential areas or roads with lower speed limits, it can take anywhere from
30 minutes to a couple of hours
(not accounting for traffic) to drive 25 miles.
How many feet does it take to stop at 35 mph?
Because of this human factor, as speeds increase, the stopping distance increases dramatically. At 30mph the stopping distance is much greater—109 feet. At 35 mph it goes up to
136 feet
, and you’re not really speeding yet. Switch up the numbers to freeway speeds—60 mph has a stopping distance of around 305 feet.
When traveling at 35 mph does it take you feet to come to a complete stop?
Assuming you have good tires, good brakes, and dry pavement: At 55 mph, it takes about 400 feet to react to something you see and to bring the car to a complete stop. At 35 mph, it will take about
210 feet
to react and to bring the car to a complete stop.
How far can a car travel in 3 seconds?
| Three-Second Rule 3 seconds | Speed Distance Traveled Good | 25 m.p.h. 37 ft. per second 111 ft. | 35 m.p.h. 52 ft. per second 166 ft. | 45 m.p.h. 66 ft. per second 198 ft . |
|---|
How long does it take to go a mile at 10 mph?
| min/mile mph min/km | 7 min 8.5 4 m 20 s | 8 min 7.5 4 m 58 s | 9 min 6.6 5 m 35 s | 10 min 6 6 m 12 s |
|---|
How long does it take to drive 40 miles?
Answer: The total time taken to cover 40 miles at 60 mph in
40 minutes
. The unit of speed is always in accordance with that of the time and distance.
How long does it take to drive 48 miles?
Answer provided by
While 20 miles and 30 minutes is about the national average for a one-way commute, 48 miles driving is
between 40 minutes and 1 hour
.
What is .35 of an hour?
| Minutes Tenths of an Hour Hundredths of an Hour | 20 .3 .34 | 21 .3 .35 | 22 .3 .36 | 23 .3 .38 |
|---|
What is .10 of an hour?
A tenth of an hour represents 10% of an hour which is equal to
6 minutes
.
What is .50 of an hour?
Converting Hours
For example, 50 percent of an hour equals
30 minutes
, because 0.50 * 60 equals 30.
Is it OK to run 10K everyday?
“Regarding 10k/day,
there are a lot of benefits, especially in Marathon training – IF you have the base fitness to run ~42 miles per week
. What is this? If you’re not already running 30-35 miles per week, the disclaimer is to slowly work up to that volume.”
How long does it take to run 10K?
Most runners who are reasonably fit and clock 15–30 miles per week can expect to finish a 10K race in
50–70 minutes
. More advanced runners will usually finish in 43–50 minutes. Exceptionally fit runners can average a mile every 7 minutes, whereas more casual runners can expect to run a mile every 10–14 minutes.
How long does it take to walk 10 miles?
Walking takes time
A typical walking pace is 15–20 minutes per mile. Going any faster will result in you essentially jogging or running, which has other benefits and downsides compared with walking. At the typical walking rate, it’ll take you
2–3 hours
to get to 10 miles.
How long is a 35 mile drive?
35 miles at 45 mph:
46 minutes, 40 seconds
. 35 miles at 50 mph: 42 minutes.
How long does it take to drive 30 miles at 50 mph?
30 miles at 50 mph:
36 minutes
.
How long does a 20 mile drive take?
Answer provided by
That said, 20 miles should take
between 20 to 40 minutes
to drive. Of course, the time it actually takes depends on the speed limit: If you are driving 20 miles on the interstate, where the speed limit is 65 mph, it should only take around 20 minutes.
How far does a vehicle travel per second at 30 mph?
| Speed Metres per second | 20mph 9.0m (30ft) | 30mph 13.5m (45ft) | 40mph 18.0m (60ft) | 50mph 22.5m (74ft) |
|---|
How far is a 2 second gap?
Remaining at least 2 seconds from the vehicle in front will provide a distance of
one car length per 5 mph
, at which ever speed you drive. The 2 second rule is used regardless of speed because the distance between your vehicle and the one in front will extend the faster you travel.
How far does a car travel in 1 second?
Answer: A car travels
0.017 miles
in 1 second.
