Depends of a few factors, like how do you drive, do you track your car, highway or city driving... ...if you are a middle of the road driver, with average use and miles driven, I would guess 8 mm will get you 40-60K miles or so. IF you drive more like me ... then maybe 15-20K miles.
How long will 1mm brake pads last?
Registered. The brake pads usually start with 11mm. You have 4mm left (replace point is 3) so you have used 7mm in 33k miles. At your rate it will take 33/7 or about another 5K miles to wear another 1mm.
How long should a brake pad mm last?
If you are purchasing new brake pads, then you will want their friction material to be around 10 to 12 millimeters. This is the standard thickness size that you will see for most new brake pads. It should take about 50,000 miles (more or less) for the thickness to 3 to 4 millimeters .
How long will 7mm brake pads last?
No worries to replace until it gets down below 2mm. The wear indicator will cause the brakes to squeal as a reminder. 7mm should last for years on the rear and the front would depend on your driving habits.
What thickness should brake pads be replaced?
Brake pads should typically be replaced when approximately 1/8′′ to 3/16′′ of friction material remains on the steel backing plate. Brake rotors should be replaced before their thickness has reached the prescribed “Worn Rotor Minimum Thickness” limit (expressed in millimeters) engraved on the edge of the brake disc.
What does 8mm mean on brakes?
8 mm is about 75% left . there is no reason to replace. rarely are front and rear at same life. just do your rear brakes and ride out the fronts.
Is 5mm brake pads OK?
If you're told you have 5mm of pad remaining you might replace the pads too late to be safe, or too soon to get full value for money out of them .
How long do 2mm brake pads last?
2mm can go from 2ft to 2000miles . Has more to do how you use the brakes and not the miles. 2mm can go from 2ft to 2000miles.
Is 4 mm brake pads OK?
Typically, 4mm of brake pad is recommended , so if you think they're thinner than that, it's time to get them checked and possibly replaced. This is the easiest way to keep on top of your brake pad condition and requires no tools or training to carry out.
How many mm thick are new brake pads?
The friction material on a new brake pad is typically about 8-12 millimeters thick, and those that are ready for replacement are worn down to about 3 mm.
How long will 6mm brake pads last?
In reality all wearable parts are ‘nearing end of life', especially brake pads. Depending on the material used, 6mm may last 10k, 20k or 5k .
What is the legal minimum brake pad thickness?
There should be at least 3mm of pad visible. If you see anything less, get the brake pads inspected.
What does 7mm brake mean?
this means the pad material is worn off and the metal on metal contact is bad .
What does 6mm mean for brakes?
If the thickness of the brake pads is less than 6mm, the mechanic would recommend having the brakes checked in 1000-2000 miles to see if they need to be replaced . It is recommended that most brakes pads be replaced immediately if they are worn to 3mm.
How often should you replace brake pads?
As a general rule, you should get your brake pads replaced every 10,000 to 20,000 miles to keep wear to a minimum. When it comes to your rotors, you have a bit longer. Your rotors should be replaced between 50,000 and 70,000 miles to keep your brakes in peak health.
Do front or rear brake pads wear faster?
Your front brake pads will also wear down faster than your rear pads . The front of your vehicle handles a lot more weight transfer as you brake, causing more wear. Over time heat and friction also contribute to brake pad wear. Which axle your brakes are on will also influence how much wear and tear your pads sustain.
Should I replace all brake pads at once?
Do You Need to Replace All 4 Brake Pads? There are brake pads on each of your vehicle's wheels. Most mechanics recommend replacing brake pads in the front or brake pads in the rear at the same time . If one brake pad on the front axle is replaced, then all brake pads on the front axle should be replaced.
When should I replace my brake pads 32?
Many mechanics advise that if a pad has below 2/32 of an inch left , it must be replaced. A lot of drivers wait up until they hear the noise of the metal wear indication, which can only be heard after the brake pad is worn. This is a solid indication that the brake pads are worn greatly and have to be replaced.
At what MM should rotors be replaced?
Disc brake rotors usually last so long that many people treat them as ‘fit and forget' components. However, manufacturers provide minimum thicknesses for their rotors. Shimano recommends that its rotors, which start out 1.8mm thick, should be replaced when the braking surface has been reduced to 1.5mm .
How many mm are Audi brake pads?
Brand new brake pads on your AUDI have approximately 12 mm thickness of friction material. When brake pads are worn down to 4 mm it is time to start planning your brake service. During the life of your AUDI brakes they should never squeal or make noises when in use.
How do I know how much brake pad I have left?
You might need a flashlight to get a good look at the brake pad. If the pads look thin, less than 1/4′′, it might be time to get them replaced . On some brake pads, you might see a wear indicator slot down the center of the pad. If the slot is gone or just barely visible, it's time for new brake pads.
How thin can brakes get?
For the braking system on your automobile to function properly, the brake pads should not be allowed to get thinner than 1⁄4 inch . Brake pad thickness plays an essential role in road safety. Brake pads that measure 1⁄8 inch in thickness have reached the end of their recommended wear limit.
