How Many Bundles Of Cedar Shakes Are In A Square? - Fixanswer

Cedar shakes cost around $130 per bundle or

$400 per square

. This particular wood is desirable because it is attractive, long-lasting and has a fine texture that makes it easy to seal against the elements. It’s resistant to pests.

How many shakes are in a bundle?

Bundles are referred to by the number of courses of butts at each end; a 20/20 bundle has 20 layers at each end, or 40 layers in total. Bundles are usually packed so that four bundles of shingles or

five bundles of shakes

constitute a square.

How many staples are in a square of cedar shingles?

Each Certi-label shake or shingle shall be applied with

two (2) staples

. Staples must be 16 gauge with crowns 7/16′′ minimum horizontal, maximum 3/4′′ horizontal to the Certi-label shake or shingle butt.

How much is a square of shake siding?

Styles Per Square Foot	Shake & Shingle $6.50 – $13.75	Lap (Dutch, Shiplap, Channel, Clapboard) $2.50 – $7	Tongue & Groove $3 – $7	Board & Batten $1 – $2

Are cedar shakes expensive?

Cedar shake siding costs

between $6 and $12 per square foot

for materials and installation. Shingle siding costs $6 to $10 per square foot. To put cedar siding on an entire house, it costs $9,000 to $19,000 or more, depending on the size of the home.

Are cedar shakes more expensive than siding?

Wood siding isn’t as popular as it once was, but cedar shake and shingles display the beauty of wood in a prominent way.

It tends to be more expensive than other wood siding options

, due mostly to labor, and has some advantages over other wood siding options.

How much does a bundle of shakes cover?

For example: 18 shake bundles 12/12 should cover 100 square feet at 7 1/2 exposure. 9/9 ” pack should give

75% coverage of a square

.

How much does cedar shake reveal?

When installing a stained or dry shingle, leave

1/8′′ to 1/4′′ between each piece

depending on the humidity level recorded. If your shingles are large or very dry, it is best to go with 1/4′′. For green shingles, leave 1/16′′ to 1/8′′. The exposure is the exposed surface of the shingle once installed.

How do you calculate cedar shake siding?

Measure the length and width of all surfaces to be covered. …
Multiply the length by the width of each side.
Add the totals for each side of the project.
Calculate the number of shingles needed.

Can you install cedar shakes with Staples?

The Cedar Shake & Shingle Bureau prefers the use of nails, however if you choose to use staples they must be

stainless steel Type 316 in locations within fifteen (15) miles of salt water

. For locations outside of the salt water zone – stainless steel staples Type 304 or Type 316 must be used.

What size nails do you use for cedar shingles?

Certi-Split & Certi-Sawn Shakes with 18-inch and 24-inch Tapersawn Certi-label Shake or Shingle: Use

6d Box 2-inch nails

. Centigrade Shingles with 16-inch and 18-inch Certi-label Shingles: Use 3d Box 1 1/4-inch nails.

What size nails do you use for cedar siding?

Siding Type Thickness (in.) Nail Size	Bevel 3/4 2-1/4 (7d)	7/8 & greater 3 (10d)	Boards, Tongue & Groove, and Channel 5/8 2 (6d)	3/4 2 (6d)

How much is a square of red cedar shingles?

Red Cedar Shingles costs Zip Code Sq. ft.	Basic Better	Red Cedar Shingles – Installation Cost $220.00 – $240.00 $265.00 – $280.00	Red Cedar Shingles – Total $385.00 – $415.00 $455.00 – $490.00	Red Cedar Shingles – Total Average Cost per square foot $4.00 $4.72

How much is a square of vinyl cedar shake siding?

Vinyl shake siding prices range from

$4 to $8.50 installed per square foot

. This is considerably more expensive than horizontal lap, although often times, shake or shingles are only used on smaller portions of the home for visual accents.

How much does cedar shake siding cost per square foot?

The average cost to install cedar shake siding ranges from

$6.50 to $13.50 per square foot

. You can expect to pay between $16,600 and $25,500 for a contractor to install new cedar shake siding on a typical house.