| Production history | External No | Cable 40 or 80 conductor ribbon cable | Pins 40 | Data |
|---|
How many pins does SATA cable have?
The Serial ATA (SATA) Power connector has 15 pins and is slightly larger than the SATA data connector. One main advantage the SATA power connector provides over the 4 pin power connector is a pin that provides 3.3 V of power.
What is the IDE connector?
Integrated Drive Electronics (IDE) is a standard interface for connecting a motherboard to storage devices such as hard drives and CD-ROM/DVD drives . The original IDE had a 16-bit interface that connected two devices to a single-ribbon cable. ... Prior to IDE, controllers were separate external devices.
How many wires does the standard IDE drive cable have?
IDE ribbon cables have either 40 or 80 wires . There is a connector at each end of the cable and another one about two-thirds of the distance from the motherboard connector.
What piece of hardware do IDE cable connect to?
Integrated Drive Electronics (IDE) is a standard interface for connecting a motherboard to storage devices such as hard drives and CD-ROM/DVD drives . The original IDE had a 16-bit interface that connected two devices to a single-ribbon cable.
How many IDE devices can you have in a PC?
A single IDE interface can support two devices . Most motherboards come with dual IDE interfaces (primary and secondary) for up to four IDE devices. Because the controller is integrated with the drive, there is no overall controller to decide which device is currently communicating with the computer.
How do you connect IDE cables?
An IDE, or PATA hard drive, uses a wide, flat or thick cable to connect to the computer's motherboard .
What is the full meaning of IDE cable?
IDE, an acronym for Integrated Drive Electronics , is a standard type of connection for storage devices in a computer. Generally, IDE refers to the types of cables and ports used to connect some hard drives and optical drives to each other and to the motherboard.
Are IDE cables still used?
IDE popularly came to be known as PATA, for their parallel style of data transfer. IDE originally had 40-pin and 80-ribbon cables. While some of these are still in use , modern IDEs with 28 pins are found in most machines. ... These cables offered flexibility as well as better cooling effects.
Do they still make IDE drives?
No one manufactures them anymore . Seagate stops shipping them: http://arstechnica.com/gadgets/2007/07/seagate-plans-to-stop-manufacturing-ide-drives-by-the-end-of-... When the cable DVR manufacturers switched from IDE to SATA, it was (finally) the last nail in the coffin for IDE.
Why are there 2 IDE connectors on certain motherboards?
They are the reason the newer motherboards have only one 40-pin IDE connector. The SATA interface has replaced the IDE interface as the preferred hard drive interface. The two long blue connectors are the memory slots . ... These are typically used for CD ROM drives.
What does a IDE connector look like?
IDE consists of a 40-pin connector attached to a ribbon cable . 80-pin connectors were also introduced later. The connectors are black in a 40-pin connector while in an 80-pin connector, they come in 3 colors: blue – controller, gray – slave drive, and black – master drive.
What is IDE ribbon cable?
IDE, an acronym for Integrated Drive Electronics , is a standard type of connection for storage devices in a computer. Generally, IDE refers to the types of cables and ports used to connect some hard drives and optical drives to each other and to the motherboard.
How many IDE device can connect on a single IDE channel?
A single IDE interface can support two devices . Most motherboards come with dual IDE interfaces (primary and secondary) for up to four IDE devices.
How long can an IDE cable be?
The maximum length is actually 18 inches from the IDE device to the IDE controller. You can have a 36 inch cable, as long as the IDC connector at the 18 inch mark is connected to the IDE controller.
How many drives can be connected to a single IDE connector?
Each IDE channel can support two drives . A single IDE ribbon cable has three connection. One connection connects to the motherboard and the other two connections are available for the two drives.
