Harley Davidson Softails require
one quart of primary
fluid. Be sure to check your owner's manual or the AMSOIL Product Guide for the correct primary oil capacity for your bike.
How much oil do I put in the primary?
The primary is only supposed to be filled up to the BOTTOM of the clutch spring. Start with
one QT and add little by little
until the level reaches the bottom of the shiny ring at the bottom of the clutch pack housing.
How much primary oil does an 88 cubic inch Harley?
Fluid capacity is
1 Quart
* (32 fluid oz) for all Evo and Twin Cam88/103 primaries from 1980-2006 (*except 2006 Dyna). The new bikes 2006-up Dyna, 2007-up Softail & Touring take a 45 fluid oz if the entire primary assembly has been removed or 38 fluid oz if you are simply draining the old fluid adding new oil.
How do you fill a Harley Davidson primary oil?
Fill the primary with oil
Harley Davidson Softails require
one quart of
primary fluid. Be sure to check your owner's manual or the AMSOIL Product Guide for the correct primary oil capacity for your bike. Once you've filled the primary case with fluid, double check the fluid level visually.
How much oil does a 883 primary take?
Insert the nozzle of a funnel into the primary chain inspection hole. Pouring slowly, pour
approximately 1 qt of oil
into the transmission.
What kind of oil goes in Harley primary?
You actually have a couple of choices for the primary drive. The optimum product would be
Mobil 1 RacingTM 4T 10W-40 motorcycle oil
, but it is also okay to use Mobil 1TM V-Twin 20W-50.
How often should you change primary oil in my Harley?
Oil changes as per Owners manual every 5k Miles, Tranny and Primary
every 10K
. If you ride it more you'll be changing it more often.
How much oil goes in a Harley transmission?
The transmission fluid capacity is
approximately 24 ounces
(0.71 liters).
How much oil goes in a Shovelhead primary?
Harley-Davidson recommends
4 quarts of SAE 50 or 60 engine
oil in all 1966 through 1984 shovelheads. The transmission uses 1.5 pints of HD transmission lubricant, although many people use 75w90 gear oil mixed 3-to-1 with Lucas oil.
What does the primary do on a Harley?
The primary drive consists of an engine output sprocket (attached to the crankshaft),
clutch assembly
, roller chain (or belt) and usually a housing that encloses the entire assembly. The purpose of the clutch is to engage the primary drive to the transmission.
Is Harley formula plus synthetic?
TESTED-CERTIFIED for use in Harley-Davidson® engine, primary chaincase and transmission applications, Screamin' Eagle® SYN3®
Full Synthetic Lubricant
makes changing and topping-off fluids a simple one-product process.
Does a Harley Sportster have transmission fluid?
The Sportster 883 is a motorcycle made by Harley Davidson.
The transmission fluid is part of the bike's oil system
. You need to checking the fluid level periodically to ensure the engine runs smoothly.
Can you use synthetic oil in Harley primary?
Answer: For any Harley Twin-Cam engine, we highly recommend using
AMSOIL Synthetic 20W-50
in “all three holes” (as they put it) for two essential reasons. … AMSOIL V-Twin 20W-50 is designed for engine, primary and transmission use.
What oil is best for Harley-Davidson?
- Best Overall: AMSOIL FULL SYNTHETIC Motorcycle Oil 20W-50.
- Runner-Up: Mobil 1 96936 20W-50 V-Twin Synthetic Motorcycle Motor Oil.
- Best Budget: Castrol 06116 POWER1 V-TWIN 4T 20W-50.
Can I use Mobil 1 in my Harley?
Mobil
1 V-Twin 20W-50
is specifically recommended by ExxonMobil for lubrication of four-stroke motorcycle engines in high performance motorcycles. Recommended by ExxonMobil for use in Harley-Davidson.
How do you check the primary oil on a Harley Davidson?
Fill the primary with oil
Harley Davidson Softails require
one quart
of primary fluid. Be sure to check your owner's manual or the AMSOIL Product Guide for the correct primary oil capacity for your bike.
