Affiliate Disclosure: As an Amazon Associate, FixAnswer may earn commissions from qualifying purchases made through links in this article. Prices are subject to change.
Specsavers does not charge for replacement glasses if they are faulty; replacements are free of charge.
Replacements are limited to the same quantity and spec as your original order, and you’ll need to contact Customer Service through the online form to set up the swap. This policy covers manufacturing defects, but it doesn’t apply to loss or accidental damage — those situations might call for a new purchase or an insurance claim. If you want the full details, check out the Specsavers customer service page here: Specsavers.
How much does it cost to fix glasses hinge?
The typical cost to fix a glasses hinge at Specsavers is $35 to $45.
Most glasses come with metal hinges that are fused in place, so a technician can pop them out and swap in a brand‑new hinge. Prices can shift a bit depending on where you are and if any extra tweaks are needed, but that $35‑$45 range pretty much captures the standard service fee. Basically, you’re paying for the hinge itself and the labour for a fast, in‑store fix.
Can broken glasses be fixed?
Yes, broken glasses can often be fixed, depending on the extent of the damage.
Many repair shops can reshape both metal and plastic frames, and you’ll often find that minor adjustments are thrown in for free. If the frame’s badly snapped or the bridge is cracked, though, you’ll need specialized tools—think soldering for metal or welding for certain plastics. For a fast check‑up, swing by your local Specsavers or an independent optician.
How do you fix a broken glasses frame?
To fix a broken glasses frame, first identify the material and then apply the appropriate repair method: soldering for metal frames, careful heating and reshaping for plastic, or ordering a replacement part for titanium.
With metal frames, a jeweler’s soldering kit can rejoin the broken pieces, although the joint might end up a weak spot. For plastic frames, you can soften them with hair dryer for about 20‑30 seconds, then gently bend them back into shape. If the damage is extensive, swapping out the damaged part is usually the safer bet.
How do you fix bent arm glasses?
To fix bent arm glasses, gently warm the frames and use padded pliers to reshape the arms.
Start by laying a thin cloth over the glasses to prevent them from getting damaged. Then blast the plastic with a hair dryer for 20‑30 seconds until it’s pliable. Keep the cloth on, grab a pair of needle‑nose pliers, and gently bend the arm back to where it started, checking often so you don’t over‑correct. Once you’re happy, let the frames cool all the way before putting them on to lock in the new shape.
Place a thin cloth over the glasses to prevent them from getting damaged. ...
Make sure the cloth is unwrinkled so you can see how the glasses bend underneath it.
Position the pliers over the bent section of the frames.
Hold them securely but not too hard as you adjust the glasses.
Do Specsavers just fit lenses?
Specsavers does more than just fit lenses; they also assess frame suitability and prescription needs before reglazing.
Whether you can reglaze your existing frame hinges on its condition, size, shape, curvature, and your prescription needs. If the frame’s overly worn or the curvature doesn’t match the new lenses, Specsavers might steer you toward a fresh frame instead. This check‑up helps guarantee clear vision and comfort. Want more detail? Have a look at the American Optometric Association’s guidelines on lens fitting here: American Optometric Association.
How do you fix the arm hinge on glasses?
To fix the arm hinge on glasses, a technician typically removes the damaged hinge and replaces it with a new one.
The tech opens the hinge, pulls out the worn metal piece, and presses in a new hinge that matches the frame’s specs. That restores smooth movement and eases stress on the temple. Usually the whole thing is done during the same visit, and it falls under Specsavers’ free lifetime servicing for minor repairs.
How do I replace my lost glasses?
You can replace lost glasses at Specsavers by providing a valid prescription; if the prescription is expired, an eye exam is required.
If your prescription’s up to date, Specsavers can remake the lenses and frame without another trip to the doctor, often in under an hour. Should your prescription have expired, you’ll need a quick refraction and exam—usually about $50—before the new glasses can be produced. This service lets you get clear vision back fast after a loss.
How do you fix a bent arm plastic lens?
Fixing a bent arm with plastic lenses involves carefully heating the plastic temple and gently reshaping it to avoid lens damage.
Start with low heat from a hair dryer on the temple area for roughly 20 seconds, then grab a soft cloth to hold the arm and gently bend it back into line. Too much heat can warp the lenses or cause delamination, so keep the dryer moving and check the temperature often. Once it’s straight, let the frame cool completely before you wear it to lock in the new shape.
Can you reattach an arm to glasses?
Yes, an arm can be reattached to glasses if the frame is metal (non‑titanium) and can be soldered; plastic or titanium frames usually require a replacement part.
With metal frames, a jeweler’s solder can rejoin the broken arm, although the joint might stay a weak point and could snap again under stress. Plastic frames can’t be soldered at all, so you’ll need to order a new temple piece from the manufacturer. Titanium frames also call for a replacement part, since welding titanium without the right gear is pretty tricky.
How do I fix my stretched out glasses?
To fix stretched out glasses, heat the plastic temple tips and bend the arms inward to restore proper tension.
Grab a hair dryer on low for 20‑30 seconds to soften the temple tips, then gently nudge the arms inward until they feel snug but not too tight. Bend too far and the frames might pinch your head, so make tiny adjustments and check the fit often. Once you’re happy with the feel, let the glasses cool all the way to set the new shape.
How do I bend my glasses back into shape?
You can bend your glasses back into shape by applying gentle heat to the frames and carefully adjusting them with padded pliers.
Heat the whole frame evenly with a hair dryer for roughly 30 seconds, being careful not to linger on any one spot to avoid lens damage. Then, using cloth‑covered pliers, make small tweaks to the nose bridge, temples, or arms until the glasses sit just right on your face. Check the fit in a mirror and repeat the heat‑adjust loop if things still feel off.
How much does it cost to put new lenses in old frames?
Putting new lenses in old frames at Specsavers typically costs around $40 for basic lenses, rising to $100 or more with coatings or photochromic lenses.
Basic single‑vision lenses usually kick off around $40, and adding anti‑glare, scratch‑resistant, or UV‑protective coatings can tack on another $20‑$40. Photochromic lenses like Transitions often bring an extra $30‑$60, which can push the total into the $100‑$130 range. These numbers reflect the lens material and any optional upgrades you pick.
What do you do with old glasses Specsavers?
Specsavers runs a glasses recycling program where you can donate old glasses for reuse or recycling.
If you want to make a difference, just swing by your local Specsavers with your old glasses and drop them in the recycling box or hand them to a staff member. The collected frames get cleaned, repaired when possible, and then sent to people in need overseas or recycled responsibly. This program cuts waste and backs global vision care.
Can opticians put new lenses in old frames?
Yes, opticians can put new lenses in old frames, provided the frames are in good condition and match the prescription requirements.
Once the frames reach the opticians at rx‑able.com, they pull out the old lenses and slot in the new ones. Their process lets them fit fresh lenses into virtually any frame—regardless of age or brand—so long as the frame passes a proper assessment. That check makes sure the new lenses sit right and give you clear vision.
Can you pay monthly at Specsavers?
With our
monthly direct debit scheme
(we call it the easycare package), you’ll get everything you need for hassle‑free contact lens wear, plus a bunch of extra perks. Signing up is a breeze; just ask in store or give us a call.
Edited and fact-checked by the FixAnswer editorial team.
