How Often Does A Gunite Pool Need To Be Resurfaced?

by | Last updated on January 24, 2024

, , , ,

On average, gunite swimming pools last

7 to 10 years

before they need to be resurfaced. When that time comes, it’s important to know what options are available so that you can pick the best choice for your backyard space.

Can a cracked gunite pool be repaired?

When faced with a leaking gunite pool crack, you and your customer are faced with several options for repair:

simple topical repairs that can be made while the pool is filled

, more permanent crack injections, or extensive concrete removal and structural re- engineering.

How much does it cost to repair a gunite pool?

Gunite and fiberglass can average

up to $6,500

, including labor. Depending on what you currently have, resurfacing may require completely replacing the pool surface and base. This costs between $35,000 and $65,000 and is essentially the same as the cost of building a new pool.

Can a gunite pool be patched?

Gunite is porous and is sealed from the water by a plaster coating. When the water behind the pool permeates the porous material and changes temperature it expands and contracts and cracks can appear. … Other times the gunite itself has a crack. This also

can be repaired

.

What is the life expectancy of a gunite pool?

When designed and built properly, gunite pools should last for

100 years or more

. In contrast, fiberglass pools last for approximately 25 years, while vinyl pool liners generally must be replaced every six to twelve years.

How many times can a pool be resurfaced?

It varies depending on the type of pool, with plaster or cement pools needing to be resurfaced

every 3-7 years

while fiberglass pools can sometimes go as long as 15-30 years.

How do you maintain a gunite pool?

  1. 1) Timing is everything. Before the pool can be used, it must be prepared. …
  2. 2) Clearing debris. …
  3. 3) Cleaning the interior. …
  4. 4) Clean the filter. …
  5. 5) Check for leaks. …
  6. 6) Test chemicals. …
  7. 7) Maintain correct water level. …
  8. 8) Use the pump daily.

Is it normal for gunite to crack?

A common cause with pool cracks is from too-thin gunite used during the installation process. During the construction process, the gunite might not adhere properly to the steel framework. … Rebound gunite is very weak and it lacks the structural integrity of regular gunite.

It’s more susceptible to cracks

.

How do I fix a crack in my inground pool?

Using a damp grouting sponge, lightly moisten the perimeter of the crack. Use the

putty knife or trowel

to apply to pool plaster and gently push it into the crack. Make sure it’s smooth and free from air bubbles. Then use the putty knife or trowel to scrape off excess plaster.

Is it OK to empty a pool?


Your pool is not meant to be empty

. Whether you have a vinyl, concrete, or fiberglass pool, it is at its best when it’s full of water. Once the water is drained, you open yourself up to all sorts of damage, so drain a pool only when there is no other option. … Water is heavy, and hydrostatic pressure can be significant.

How do you know if your gunite pool is leaking?

  1. Water Level Changes. Dropping water level is the clearest sign a pool is leaking, but it’s important to determine if the water loss is due to evaporation or a leak. …
  2. Cracks or Falling Tile. …
  3. Wet Spots in Yard. …
  4. High Water Bills. …
  5. Water Under Equipment. …
  6. Air or Dirt Blown Into Pool. …
  7. Algae Growth.

Why do I have to water gunite?


Water is applied to aid in hydration/curing

, a process which decays exponentially, so watering is most critical in the first hours/days after placement. Concrete will continue to cure/harden forever, but the strength used for design work is the strength after curing for 28 days.

Can a gunite pool be left empty?

Your in-ground gunite pool is designed to hold water. When you remove the water from a gunite pool and leave it empty, you

run a significant risk of damaging your pool

. … The external pressure of water in the surrounding soil can collapse the gunite or even pop it up out of the ground.

What pools last the longest?

Pools with vinyl liners will last more than 20 years, as long as you replace your liner every 6-12 years. Concrete pools have exceptional longevity, but you need to resurface the concrete every 10 years or so.

Fiberglass pools

have the longest lifespans of any in-ground pool, often easily surpassing 30 years.

Is a gunite pool good?

Gunite swimming pools are

highly durable

and can be created in just about any shape. They don’t require wooden frameworks to hold the shape of the pool basin. Custom Gunite pools have become very popular lately, and it’s easy to see why.

Jasmine Sibley
Author
Jasmine Sibley
Jasmine is a DIY enthusiast with a passion for crafting and design. She has written several blog posts on crafting and has been featured in various DIY websites. Jasmine's expertise in sewing, knitting, and woodworking will help you create beautiful and unique projects.